Page 1
1
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw
CHENBRO
User’s Manual
SK51102
1-to-1 2.5” SATA HDD
Storage Kit
V ersion A0
December / 10 / 2008
Page 2
2
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Copyright
Copyright © 2006 CHENBRO Micom Co., Ltd.. All rights reserved.
Unless otherwise indicated, all materials in this manual are copyrighted by CHENBRO Micom Co., Ltd.. All rights
reserved. No part of this manual, either text or image may be used for any purpose other than internal use within
purchasing company. Therefore, reproduction, modification in any form or by any means, electronic, mechanical or
otherwise, for reasons other than internal use, is strictly prohibited without prior written permission.
CHENBRO Micom Co., Ltd. reserves the right to make improvement and modification to the products indicated in
this manual at any time. Specifications are therefore subject to change without prior notice.
Information provided in this manual is intended to be accurate and reliable. However, CHENBRO Micom Co., Ltd.,
assumes no responsibility for its use, nor for any infringements upon the rights of third p a rties, which may result from
its use.
Technical Support
CHENBRO works hard to offer our customers maximum performance from our chassis. But in case you
have any problem with our product you can find supports from the following resources.
Web Support
Detail information of our products is in our website. You can find technical updates, installation guides, FAQs,
technical specifications and more. Our web address is: www.chenbro.com
.
Email Support
You can also fill out the technical support form at our Technical Support page. You technical issue inquiries will be
sent directly to our support professionals.
Phone Support
You can also contact CHENBRO HQ or branch office for immediate support; their contact Information is as
following:
CHENBRO HQ CHENBRO Europe B.V. CHENBRO Micom (USA) Inc.
Tel: 886-2-8226-5500 Tel: 31-40-295-2045 Tel: 1-909-947-3200
Fax: 886-2-8226-5423 Fax: 31-40-295-2044
Fax : 1-909-947-4300
Page 3
3
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Contents
Copyright......................................................................................................................................................2
Technical Support......................................................................................................................................2
Contents.......................................................................................................................................................3
Revision History.........................................................................................................................................4
Safety Information .....................................................................................................................................5
Conventions Used in this Manual..........................................................................................................5
Getting Start with the SK51102 Storage Kit ........................................................................................6
Unpacking and Checking the Contents.......................................................................................6
Technical Specifications..........................................................................................................................6
Compatible CHENBRO Chassis.............................................................................................................6
Introduction.................................................................................................................................................7
Functional Specification..........................................................................................................................7
General..................................................................................................................................................7
Host / Drive / Power Backplane Interface....................................................................................7
Mechanical Dimension.............................................................................................................................8
Components Description.........................................................................................................................9
Front View............................................................................................................................................9
Rear View .............................................................................................................................................9
Connector & Switch Definition.............................................................................................................10
HDD Failure Signal Connector .....................................................................................................10
Setting for HDD Failure Signal Cable Connection (SK51102)..................................... 10
Setting for HDD Failure Signal Cable Connection (RAID Card) ................................. 10
Installation Procedures..........................................................................................................................11
Hot-swap HDD Assembly...............................................................................................................11
Page 4
4
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Revision History
Date Modifications
Dec. / 10 / 2008 z First Release
Page 5
5
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Safety Information
z Read the installation instructions before connecting SK51102 to the power source.
z Only trained and qualified personnel should be allowed to install, replace or service this equipment.
z Never install this product in a wet environment.
z Position system cables and power cables carefully; route system cable and the power cable and plug so
that they cannot be stepped on or tripped over. Be sure that nothing rests on your system components’
cables or power cable.
Conventions Used in this Manual
The following conventions are used in this manual.
Important Icon:
Provides important information on the current topic that must not be overlooked.
Page 6
6
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Getting Start with the SK51102 Storage Kit
Thank you for purchasing SK51102! This section covers unpacking and identify ing components.
Unpacking and Checking the Contents
The complete SK51102 package includes the following items:
Item Description Quantity Picture
SK51102 stor age cage 1
Hot-swap 2.5” Hard Disk Drive (HDD) tray 1
SATA cable, 700mm 1
HDD failure signal cable, 2P to 2P, 600mm 1
Screw: M3 (4mm) for HDD assembling 4
Screw: M2 (3mm) for SK51102 a nd chassis assembling 4
Technical Specifications
Occupancy 1 x Slim ODD Drive Bay
Capacity 1 x 2.5” SATA Hot-swap HDD
Dimension (WxHxD)
128 x 12.7 x 129.4 (mm)
5 x 0.5 x 5.1 (inch)
Weight 227 g
Compatible CHENBRO Chassis
z RM11704B / RM12404B / RM12500 / RM12800 / RM13106 / RM13204 /
RM21508B / RM21706 / RM21804 / RM31212B / RM31408 / RM31616
RM41416B / RM41500 / RM42200 / RM51224B / RM51424 / RM51924B
z PC719 / PC781
Page 7
7
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Introduction
The CHENBRO SK51102 can house one Hot-swap 2.5” SATA HDD in one slim ODD bay converter. The ability
for conversion allows existing server or PC to perform with one Hot-swap HDD and keep the flexibility.
In all, SK51102 is the best solution as value added feature and performance.
Functional Specification
General
z Support up to SATA-II (3.0 Gb/s)
z Compatible with 2.5” SATA HDD (9.5 mm height)
z Support inrush current control for HDD Hot-swapping
z LED indicate activity and failure
Host / Drive / Power Backplane Interface
z 1 to 1 connection for 2.5” SATA HDD
z 1x SATA / SAS Signal + Power (7+15 pin) connector at HDD side of bac kplane
z 1 x SATA / SAS interface (7 pin)
z 1 x DC power connectors (4-pin FDD power connector)
SK51102 supports 9.5 mm high 2.5” HDD only
The HDD activity LDE is available for SA TA-II HDDs.
If SATA-I HDD applied, the HDD activity LED will not work.
Page 8
8
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Mechanical Dimension
Units: mm
Page 9
9
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Components Description
Front View
Device Function
1 2.5” HDD Hot-swap Tray Refer to Page 11
2 HDD Power LED Blue LED On - HDD Power On
3 HDD activity / failure LED
Green LED On - HDD active
Red LED On - HDD failure
Rear View
Device Function
1 SATA Connector Connect to motherboard / RAID card
2 HDD failure signal connector Refer to Page 10
3 HDD Access signal connector Reserved for HDD Access signal
4 Power Connector Power input
1
4
2
3
2
1
3
Page 10
10
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Connector & Switch Definition
HDD Failure Signal Connector
This connector is for the SAS / SATA RAID card with HDD failure signal support such as LSI MegaRAID
8308ELP. Connect the 2-pin cable on SK51102 backplane and RAID card to activate the HDD failure LED.
Setting for HDD Failure Signal Cable Connection (SK51102)
Setting for HDD Failure Signal Cable Connection (RAID Card)
Connect the yellow wire of the cable to the CATHODE of the HDD failure connector on RAID card.
Refer to your RAID card’s user manual for the detailed pin definition.
HDD Failure Signal Cable:
26H115311-001
Page 11
11
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
Installation Procedures
The following is the installation procedures of HDD assembly.
Hot-swap HDD Assembly
a. Push the blue latch of HDD tray
b. Pull it out from the cage
c. Remove the supporter
Page 12
12
SK51102 ver. A0
User
’
s Manual
www.chenbro.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fa x: +886 2 82265392 Email: info@chenbro.com.tw
d. Attach HDD with four screws per tray
e. Insert HDD tray to the cage
Loading...