Unless otherwise indicated, all materials in this manual are copyrighted by Chenbro Micom Co., Ltd.. All rights
reserved. No part of this manual, either text or image may be used for any purpose other than internal use within
purchasing company. Therefore, reproduction, modification in any form or by any means, electronic, mechanical or
otherwise, for reasons other than internal use, is strictly prohibited without prior written permission.
Chenbro Micom Co., Ltd. reserves the right to make improvement and modification to the products indicated in this
manual at any time. Specifications are therefore subject to change without prior notice.
Information provided in this manual is intended to be accurate and reliable. However, Chenbro Micom Co., Ltd.,
assumes no responsibility for its use, nor for any infringements upon the rights of third parties, which may result from
its use.
Technical Support
Chenbro works hard to offer our customers maximum performance from our chassis. But in case you have
any problem with our product you can find supports from the following resources.
Web Support
Detail information of our products is in our website. You can find technical updates, installation guides, FAQs,
technical specifications and more. Our web address is: www.chenbro.com.
Email Support
You can also fill out the technical support form at our Technical Support page. You technical issue inquiries will be
sent directly to our support professionals.
Phone Support
You can also contact Chenbro HQ or branch office for immediate support; contact Information is as following:
CN1 9 pin header USB connector Connecting to M/B (USB1 & USB 2)
CN1 13 pin header System
connector
LED1 HDD LED Yellow indicator during the HDD access stage
LED2 Power LED Blue indicator during the power on stage
LED3 LAN 1 LED Green indicator during the network activity
LED4 LAN 2 LED Green indicator during the network activity
PB1 Power Switch Push button for system power on
PB1 Reset Switch Push button for system reset
PB2 Power Switch Push button for system power on
Connecting to M/B (Power SW, Reset SW, GND, Power
LED, HDD LED, LAN 1 & LAN 2)
w w w . c h e n b r o . c o m
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Through Chenbro providing USB cable (26H033219-001) and Display cable (26H11324101A0) to make 3
boards connection (LED board, B/P & M/B) as below drawing showing.
Remarks: P/N are subjected to be changed without notice
photo #a
LED Board
USB cable
Display cable
photo #b
M/B
photo #c
photo #a
photo #b
photo #c
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,