Chenbro RM13310, RM13304, RM133 Series User Manual

RM133 Series

Rackmount Chassis User Manual

November 2018 Version 1.0

A d ocument providin g an overvi ew o f product feat ures, fun ctions, archit ecture, and suppor t specificat ions

RM133 Series

<Table of Contents │ 2

DISCLAIMERS

No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.

Chenbro disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness

for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or

usage in trade.

This document contains information on products, services and/or processes in development. All information provided here is subject

to change without notice. Contact your Chenbro representative to obtain the latest Configuration Guide.

The products and services described may contain defects or errors known as errata which may cause deviations from published

specifications. Current characterized errata are available on request.

Chenbro, and the Chenbro logo are trademarks of Chenbro Micom Co.,Ltd in the worldwide.

*Other names and brands may be claimed as the property of others

© 2018 Chenbro Micom Co.,Ltd.

RM133 Series

<Table of Contents │ 3

Table of Contents

Table of Contents ............................................................................................................................................... 3

List of Figures ..................................................................................................................................................... 4

List of Tables ....................................................................................................................................................... 6

1. Product Overview .............................................................................................................................. 7

1-1 OS Validation Levels ..................................................................................................................... 8

1-2 System Outlook Overview............................................................................................................ 9

1-3 Front Panel ................................................................................................................................. 11

1-4 Rear Window Overview ............................................................................................................. 12

1-5 Front Control Panel Overview .................................................................................................... 13

1-6 System Dimensions .................................................................................................................... 14

1-7 Available Rack Mounting Kit Options (Refer to “Installation”) .................................................. 15

1-8 System Level Environmental Limits ........................................................................................... 16

1-9 System Packaging ...................................................................................................................... 17

2. Installation ....................................................................................................................................... 18

2-1 Top Cover Installation ................................................................................................................ 19

2-2 HDD Cage Installation ................................................................................................................ 20

2-3 External Hot-swap HDD Tray Instruction ................................................................................... 21

2-4 Internal 2.5’’ HDD Installation ..................................................................................................... 26

2-5 Internal Slim ODD Installation ..................................................................................................... 27

2-6 Rack Handle for System Maintenance ....................................................................................... 28

2-7 Fan Module Installation ............................................................................................................. 29

2-8 PCI-e Card Installation ................................................................................................................ 34

2-9 PSU Installation .......................................................................................................................... 35

2-10 Slide Rail Installation ................................................................................................................ 37

3. Backplane ......................................................................................................................................... 39

3-1 Storage Backplane Optional....................................................................................................... 40

3-2 12G 3.5” 4 Port Passive Backplane ............................................................................................ 41

3-3 12G 2.5” 10 Port Passive Backplane .......................................................................................... 43

3.4 NVMe 2.5” 10 Port Passive Backplane ....................................................................................... 45

4. Maintenance and Service................................................................................................................. 47

RM133 Series

List of Figures │ 4

List of Figures

FIGURE 1 RM13304 OUTLOOK OVERVI EW ............................................................................................................ 9

FIGURE 2 RM13310 OUTLOOK OVERVIEW ............................................................................................................. 9

FIGURE 3 RM13304 MAJOR COMPONENTS OVER VIEW .......................................................................................... 10

FIGURE 4 RM13310 MAJOR COMPONENTS OVER VIEW .......................................................................................... 10

FIGURE 5 RM13304 3.5’’ DRIVE BAY-4 .............................................................................................................. 11

FIGURE 6 RM13310 2.5” DRIVE BAY-10 ............................................................................................................. 11

FIGURE 7 REAR WINDOW OVERVIEW (RPSU) ........................................................................................................ 12

FIGURE 8 REAR WINDOW OVERVIEW (SINGLE PSU) ................................................................................................ 12

FIGURE 9 FRONT CONTROL PANEL ........................................................................................................................ 13

FIGURE 10 FRONT CONTROL PANEL ...................................................................................................................... 13

FIGURE 11 CHASSIS DIMENSIONS .......................................................................................................................... 14

FIGURE 12 LABEL EMBOSS DIMENSIONS ................................................................................................................. 14

FIGURE 13 FRONT TOP COVER INSTALLATION ........................................................................................................... 19

FIGURE 14 REAR TOP COVER INSTALLATION ............................................................................................................. 19

FIGURE 15 RM13304 HDD CAGE INSTALLATION..................................................................................................... 20

FIGURE 16 RM13310 HDD CAGE INSTALLATION..................................................................................................... 20

FIGURE 17 3.5” HOT-SWA P HDD ASSEMBLY INSTALLATION ........................................................................................ 21

FIGURE 18 3.5” HOT-SWA P HDD ASSEMBLY REM OVAL ............................................................................................. 21

FIGURE 19 3.5” HDD INSTALLATION (TOOL-LESS) .................................................................................................... 22

FIGURE 20 3.5” HDD INSTALLATION (SCREW) ......................................................................................................... 22

FIGURE 21 2.5” HDD INSTALLATION (SCREW) ......................................................................................................... 23

FIGURE 22 2.5’’ HOT-SWAP HDD ASSEMBLY INSTALLATION........................................................................................ 24

FIGURE 23 2.5’’ HOT-SWAP HDD ASSEMBLY REM OVAL ............................................................................................ 24

FIGURE 24 2.5’’ HDD INSTALLATION (TOOL-LESS) .................................................................................................... 25

FIGURE 25 2.5” HDD INSTALLATION (SCREW) ......................................................................................................... 25

FIGURE 26 RM13304 INTERNAL 2.5'' HDD INSTALLATION ....................................................................................... 26

FIGURE 27 INTERNAL SLIM ODD INSTALLATION ........................................................................................................ 27

FIGURE 28 RACK HANDLE LOCATION (SCREW TYPE) .................................................................................................. 28

FIGURE 29 RACK HANDLE LOCATION (LATC H TYPE) ................................................................................................... 28

FIGURE 30 FAN ASSEMBLY INSTALLATION (4028) ..................................................................................................... 29

FIGURE 31 FAN MODULE INSTALLATION (4028) ....................................................................................................... 29

FIGURE 32 FAN ASSEMBLY INSTALLATION (4048) ..................................................................................................... 30

FIGURE 33 FAN MODULE INSTALLATION (4048) ....................................................................................................... 30

FIGURE 34 FAN ASSEMBLY INSTALLATION (4056) ..................................................................................................... 31

FIGURE 35 FAN MODULE INSTALLATION (4056) ....................................................................................................... 31

FIGURE 36 FAN ASSEMBLY INSTALLATION (4056) ..................................................................................................... 32

FIGURE 37 FAN MODULE INSTALLATION (4056) ....................................................................................................... 32

RM133 Series

List of Figures │ 5

FIGURE 38 AIR BAFFLE INSTALLATION ..................................................................................................................... 33

FIGURE 39 PCI-E CARD BLANK REMOVAL ................................................................................................................ 34

FIGURE 40 PCI-E CARD INSTALLATION .................................................................................................................... 34

FIGURE 41 1U SINGLE PSU INSTALLATION............................................................................................................... 35

FIGURE 42 1U SINGLE PSU INSTALLATION............................................................................................................... 35

FIGURE 43 1U RPSU MODULE INSTALLATION .......................................................................................................... 36

FIGURE 44 1U RPSU MODULE REMOVA L ............................................................................................................... 36

FIGURE 45 SLIDE RAIL INSTALLATION (84H314610-003) .......................................................................................... 37

FIGURE 46 SLIDE RAIL INSTALLATION (84H314610-003) .......................................................................................... 37

FIGURE 47 SLIDE RAIL INSTALLATION (84H314610-003) .......................................................................................... 38

FIGURE 48 SLIDE RAIL INSTALLATION (84H314610-003) .......................................................................................... 38

FIGURE 49 DRIVE TRAY LED IDENTIFICATION ........................................................................................................... 39

FIGURE 50 12G 3.5” 4 PORT PASSIVE BACKPLANE – FRONT VIEW ............................................................................... 41

FIGURE 51 12G 3.5” 4 PORT PASSIVE BACKPLANE – REAR VIEW ................................................................................. 42

FIGURE 52 12G 2.5” 10 PORT PASSIVE BACKPLANE – FRONT VIEW ............................................................................. 43

FIGURE 53 12G 2.5” 10 PORT PASSIVE BACKPLANE – REAR VIEW ............................................................................... 44

FIGURE 54 12G MINI SAS HD 8 PORT PASSIVE BACKPLANE – FRONT VIEW ................................................................... 45

FIGURE 55 12G MINI SAS HD 8 PORT PASSIVE BACKPLANE – REAR VIEW ..................................................................... 46

RM133 Series

List of Ta bles │ 6

List of Tables

TABLE 1 CHENBRO RM13304/10 SPECIFICATIONS ................................................................................................... 7

TABLE 2 RM133 SERIES SYSTEM OVERVIEW .......................................................................................................... 13

TABLE 3 SLIDE RAIL INSTALLATION ......................................................................................................................... 15

TABLE 4 SYSTEM ENVIRONMENTAL LIMITS SUMMARY ............................................................................................... 16

TABLE 5 SYSTEM PACKAGING .............................................................................................................................. 17

TABLE 6 RM13304/10 WEIGHT INFORMATION ..................................................................................................... 17

TABLE 7 DRIVE POWER LED/ACTIVITY LED STAT ES .................................................................................................. 39

TABLE 8 12G 3.5” 4 PORT PASSIVE BACKPLANE ....................................................................................................... 41

TABLE 9 LABEL DESCRIPTION ................................................................................................................................... 42

TABLE 10 12G 2.5” 10 PORT PASSIVE BACKPLANE ................................................................................................... 43

TABLE 11 LABEL DESCRIPTION ................................................................................................................................. 44

TABLE 12 NVME 2.5” 10 PORT PASSIVE BACKPLANE ................................................................................................ 45

TABLE 13 LABEL DESCRIPTION ................................................................................................................................. 46

RM133 Series

/ Product Overview │ 7

1. Product Overview

This chapter provides a high-level overview of the system features and available options. More details for each major sub-system,

feature, or options are provided in the following chapters.

Tabl e 1 Chenbro RM13304/10 Specifications

Feature Description

M/B Form Factor

EEB（12’’x13’’）/ ATX (12’’x9.6’’)

Dimension

(Dx Wx H)

660mm x 438.5mm x 43.2mm

26’’ x 17.2’’ x 1.7’’

Drive Bay RM13304:4x3.5’’ Hot-swap,2x2.5’’ internal,1xslim ODD

RM13310:10x2.5’’ Hot-swap

HDD Backplane 12Gb/s passive BP, SGPIO, I2C

PSU Form Factor 1+1 Redundant CRPS or 1U single fix

Indicator 1 x Power Status, 2 x LAN Activity, 1xUID, 1 x System Alarm,

1 x HDD Status(Only for RM13304)

Front Control Power On/Off, UID

Front I/O 2xUSB3.0

System Security Intrusion switch(option)

Cooling Fans(Max)

Middle: 4x 4028mm,(Up to 6),（Up to T=48mm/56mm） PWM

Expansion Slot 1x Full height

Front Bezel 1U sheet metal bezel

Slide Rail Tool-less

Cubic Feet 2.89

Container Loading 20’:260,40’:560,40’H:616

RM133 Series

/ Product Overview │ 8

1-1 OS Validation Levels

Basic Installation Testing is performed with each supported operating system. The testing validates that the system can install the

operating system and that the base hardware feature set is functional. A small set of peripherals is used for installation purposes

only.

Performance Testing uses configurations that include in all available slots for a 24-hour, or a 48-hour test run without injecting

errors. Each configuration passes an installation test and Disk Stress test. Any fatal errors or phy error that occur require a complete

test restart.

Stress Testing uses configurations that include in all available slots for about a 8-hour, or High-Low Temperature a 28-hours(low

temp. 12 hours/high temp. 12 hours/increase temp. 2 hours/reduce temp. 2 hours: Total for 28 hours) test run without injecting

errors. Each configuration passes an installation test and a Backplane/Disk Stress test. Any fatal errors or phy error that occur require

a complete test restart.

OS Tec hnical Suppor t Levels

T1: Chenbro will provide support for issues involving the installation and/or functionality of a specified operating system as

configured with or without supported adapters and/or peripherals.

T2: Chenbro will provide and test operating system drivers for each of the server board’s integrated controllers, provided that the

controller vendor has a driver available upon request. Vendors will not be required by Chenbro to develop drivers for operating

systems that they do not already support. Chenbro will NOT provide support for issues related to the use of any add-in adapters or

peripherals installed in the server system when an operating system that received only basic installation testing is in use.

T3: Chenbro will not provide technical support for an open source operating system. All questions and issues related to an open

source operating system must be submitted to and supported by the open source community supporting the given operating

system.

RM133 Series

/ Product Overview │ 9

1-2 System Outlook Overview

Figure 1 RM13304 Outlook Overview

Figure 2 RM13310 Outlook Over vi ew

RM133 Series

/ Product Overview │ 10

Figure 3 RM13304 Major Components Overview

Figure 4 RM13310 Major Components Overview

A. Front Top Cover

B. Back Top Cover

C. Label Emboss

D. Top Cover Latch

E. Optical Drive Bay

F. Internal 2.5” HDD bays

G. Fan Assembly

H. Server Board

I. Power Supply

RM133 Series

/ Product Overview │ 11

1-3 Front Panel

Figure 5 RM13304 3.5’’ Drive Bay-4

Figure 6 RM13310 2.5” Drive Bay-10

A. Rack Handles

B. Storage Drive Bay

C. Optical Drive Bay

D. Info Tag

E. Front Control Panel

F. Storage Drive Bay

RM133 Series

/ Product Overview │ 12

1-4 Rear Window Overview

Figure 7 Rear Window Overview (RPSU)

Figure 8 Rear Window Overview (Single PSU)

A. 1U Redundant Power Supply

B. Single Power Supply

C. I/O Ports

D. Full Height Expansion Slot

RM133 Series

/ Product Overview │ 13

1-5 Front Control Panel Overview

Figure 9 Front Control Panel

Figure 10 Front Control Panel

Tabl e 2 RM133 Series System Overview

Label ICON Overview

A

Power Button

B

LAN1,LAN2 Activity LED

C

Power LED

D

HDD Activity LED

E

System Alarm LED

F

USB 3.0

G

UID Button/LED

H

Rack Handle (Screw Type)

I

Rack Handle (Latch Type)

RM133 Series

/ Product Overview │ 14

1-6 System Dimensions

Figure 11 Chassis Dimensions

Figure 12 Label Emboss Dimensions

RM133 Series

/ Product Overview │ 15

1-7 Available Rack Mounting Kit Options (Refer to “Installation”)

Advisory Note – Available rack and cabinet mounting kits are not designed to support shipment of the server system while installed

in a rack. If you chose to do so, Chenbro advises you verify your shipping configuration with appropriate shock and vibration testing,

before shipment. Chenbro does not perform shipping tests which cover the complex combination of unique rack offerings and

custom packaging options.

Caution: Exceeding the rail kit’s specified maximum weight limit or misalignment of the server in the rack may result in failure of the

rack rails, resulting in damage to the system or personal injury. Two people or the use of a mechanical assist tool to install and align

the server into the rack is highly recommended.

Available Rack mounting kits:

Tabl e 3 Slide rail Installation

Part Number

384-23803-3300B0 84H314610-003

Rail Dimension (mm/inch) 835/32.9" 599/23.6"

Applicable Cabinet-post to post (mm/inch) 668~936 / 26.3"~36.9" 660~838 / 26"~33"

3 Section/2 Section 3 Section 2 Section

Traveling Distance (mm/inch) 782/30.8" 560/22.0"

Support chassis width 438 438.5

Loading (kg) 30.8kg 18.8kg

Max. static loading (kg) for UL around 100kg around 60kg

Tool-less/Non tool-less Tool-less Tool-less

Support CMA Yes No

RM133 Series

/ Product Overview │ 16

1-8 System Level Environmental Limits

The following table defines the system level operating and non-operating environmental limits.

Tabl e 4 System Environmental Limits Summary

Parameter

Limits

*Range may vary, refer to Technical Product Specification*

Temperature Non-Operating -40º C to 70º C (-40º F to 158º F)

Humidity Non-Operating 50% to 90%, non-condensing with a maximum wet bulb of 28°

C (at

temperatures from 25° C to 35° C)

Shock Unpackaged Trapezoidal, 25 g, velocity change is based on Product weight

Vibration

Operating

5 Hz @ 0.0002 g2/Hz to 350 Hz @ 0.0002 g2/Hz

Input acceleration is 0.26 g RMS
10 minutes per axis for all 3 axes on all samples

Random control limit tolerance is ± 3 dB

EMI

Pre-scan

Radiated Emissions

International (CISPR 22) Radiated Limits for Radiating Class A & B Devices

Frequency range(MHz)/Class A and Class B(10 meters limits):

30MHz to 300 MHz / 40 dB ( V/m) and 30 dB ( V/m)

200MHz to 1000 MHz / 47 dB ( V/m) and 37 dB ( V/m)

RVI

Operating

HDD class

Class 1: Highest performance, reliability, and data integrity
Class 2: A second tier of performance, reliability, and data integrity
HDD I/O throughput degradation SPEC
Pass/Fail Criteria
No functional failure during test or post test diagnostics.
Requirement to pass test is based on IOMeter data throughput (in IO’s per
second) expressed as a percent of Test HDD maximum theoretical baseline
performance
Class1: > 90% of baseline for 4K Random Writes and > 80% of baseline for 128K
Sequential Writes.
Class2: > 85% of baseline for 4K Random Writes and > 75% of baseline for 128K
Sequential Writes.
Mix: > 80% of baseline for 4K Random Writes and > 70% of baseline for 128K

Sequential Writes.

RM133 Series

/ Product Overview │ 17

1-9 System Packaging

The original Chenbro packaging, in which the server system is delivered, is designed to provide protection to a fully configured

system and was tested to meet ISTA (International Safe Transit Association) Test Procedure 1A (2008). The packaging was also

designed to be re-used for shipment after system integration has been completed.

The original packaging includes –the shipping box, and various protective inner packaging components. The box and packaging

components are designed to function together as a protective packaging system. When reused, all of the original packaging material

must be used, including box and each inner packaging component. In addition, all inner packaging components MUST be

re-installed in the proper location to ensure adequate protection of the system for subsequent shipment.

Tabl e 5 Syst em Packaging

Part Number Single/ Bulk Form factor Support level Container Loading Max. static loading (kg)

387-13304-3300A0 Single 840*595*170 L5

NOTE: The design of the inner packaging components does not prevent improper placement within the packaging assembly.

There is only one correct packaging assembly that will allow the package to meet the ISTA (International Safe Transit

Association) Test Procedure 1A (2008) limits.

Failure to follow the specified packaging assembly instructions may result in damage to the system during shipment.

1-9-1 RM13304/10 Weight Inf ormation

Tabl e 6 RM13304/10 Weight Information

Product Net Weight

（kg）

Gross Weight

（kg）

Net Weight

(Lbs.)

Gross Weight

(Lbs.)

RM13304 9.5 12 16.5 26.4

RM13310 9.5 12 16.5 26.4

NOTE: An L6 system does not include processors, memory, drives, or add-in cards. It is the system configuration as shipped

from Chenbro. Integrated system weights (System configurations that include the items above) will vary depending on the

final system configuration. For the 1U product, a fully integrated un-packaged system can weigh up to 40 Lbs. (18+ Kg).

RM133 Series

/ Installation │ 18

2. Installation

RM13304/10 has support for a variety of different storage options, including:

 Up to 4 x 3.5” hot swap SAS / SATA HDD (RM13304)
 Up to 10 x 2.5” hot swap SAS / SATA HDD or SSD (RM13310)
 2 x 2.5’’ internal HDD or SSD up to 9.5mm thickness (RM13304)

Support for different storage and peripheral options will vary depending on the system model and/or available accessory options

installed. This section will provide an overview of each available option.

BEFORE YOU BEGIN

WARNING: Watch out Safety and ESD precautions instruction before installing the server.

RM133 Series

/ Installation │ 19

2-1 Top Cover Installation

Figure 13 Front Top Cover Installation

1. Insert the front top cover, and ensure the alignment holes match up on both side.

2. Secure front top cover with two screws as shown.

Figure 14 Rear Top Cover Installation

1. Insert the rear top cover, and ensure the alignment holes match up on both side.

2. Secure rear top cover with two screws as shown.

RM133 Series

/ Installation │ 20

2-2 HDD Cage Installation

Figure 15 RM13304 HDD Cage Installation

1. Insert HDD cage and carefully align the tabs of the cage with the slots on the chassis

2. Secure HDD cage with two screws as shown.

Figure 16 RM13310 HDD Cage Installation

1. Insert HDD cage and carefully align the tabs of the cage with the slots on the chassis

2. Secure HDD cage with two screws as shown.

RM133 Series

/ Installation │ 21

2-3 External Hot-swap HDD Tray Instruction

Figure 17 3.5” Hot-swap HDD Assembly Installation

1. With the lever open, insert the HDD assembly into the chassis opening and push until the locking lever engaged.

2. Push in the lever to lock it into place.

Figure 18 3.5” Hot-swap HDD Assembly Removal

1. Press the tray release button

2. Carefully remove the HDD assembly away from chassis.

RM133 Series

/ Installation │ 22

Figure 19 3.5” HDD Installation (Too l-less)

1. Align front HDD with the anchor point on the tray.

2. Slide in HDD at an angle and push down carefully.

NOTE: Due to degraded performance and reliability concerns, the use of the 3.5” drive blank as a 2.5” device bracket is

intended to support SSD type storage devices only. Installing a 2.5” hard disk drive into the 3.5” drive tray cannot be

supported.

Figure 20 3.5” HDD Installation (Screw)

1. Align front HDD with the anchor point on the tray.

2. Assemble 3.5” HDD with tray by 4 screws on the side of tray.

RM133 Series

/ Installation │ 23

Figure 21 2.5” HDD Installation (Screw)

1. Align front HDD with the anchor point on the tray.

2. Assemble 2.5” SSD into tray by 3 screws on the tray bottom.

RM133 Series

/ Installation │ 24

Figure 22 2.5’’ Hot-swap HDD Assembly installation

1. With the lever open, insert the HDD assembly into the chassis opening and push until the locking lever engaged.

2. Push in the lever to lock it into place.

Figure 23 2.5’’ Hot-swap HDD Assembly Removal

1. Press the tray release button.

2. Carefully remove the HDD assembly away from chassis.

RM133 Series

/ Installation │ 25

Figure 24 2.5’’ HDD Installation (Too l-less)

1. Align front HDD with the anchor point on the tray and slide in HDD at an angle.

2. Push down HDD carefully.

NOTE: To ensure proper system air flow requirements, all front drive bays must be populated with a drive carrier. Drive carriers

must be installed with either a drive or supplied drive blank.

There are drive carriers to support 2.5” devices and 3.5” devices. To maintain system thermals, all drive bays must be populated with

a drive carrier mounted with a hard disk drive, SSD, or supplied drive blank. Drive blanks used with the 3.5” drive carrier can also be

used to mount a 2.5” SSD into it as shown below.

Figure 25 2.5” HDD Installation (Screw)

1. Align front HDD with the anchor point on the tray.

2. Assemble 2.5” HDD with tray by 4 screws on the side of tray.

RM133 Series

/ Installation │ 26

2-4 Internal 2.5’’ HDD Installation

Figure 26 RM13304 Internal 2.5'' HDD Installation

1. Attach the plastic carrier with HDD and engage both embossed pins into the side dimples on the HDD as shown.

2. Insert the 2.5” HDD assembly into the Chassis.

3. Carefully push down the other side of 2.5’’ HDD assembly until another two embossed pins in its position.

RM133 Series

/ Installation │ 27

2-5 Internal Slim ODD Installation

Figure 27 Internal Slim ODD Installation

1. Insert the slim ODD with an angle as shown. Ensure that two embossed pin and side dimples engaged.

2. Carefully push down the slim ODD until it stays into place.

RM133 Series

/ Installation │ 28

2-6 Rack Handle for System Maintenance

Figure 28 Rack Handle Location (Screw Type)

1. Push the system all the way into the cabinet.

2. Secure the system with thumb screw on both sides as shown.

Figure 29 Rack Handle Location (Latch Type)

1. Push the system all the way into the cabinet.

2. Pull the rack handle latch downward as shown.

3. Secure the system with screws on both sides.

RM133 Series

/ Installation │ 29

2-7 Fan Module Installation

Figure 30 Fan Assembly Installation (4028)

1. Attach the fan guard with fan as shown and secure it with two screws.

2. Insert four fan mounts as shown.

Figure 31 Fan Module Installation (4028)

1. Attach the fan bracket with chassis bottom as shown and secure it with four screws.

2. Insert the fan module as shown. Ensure that alignment fan mount tabs and fan bar rails match up. Firmly press the fan module

downward.

RM133 Series

/ Installation │ 30

Figure 32 Fan Assembly Installation (4048)

1. Attach the fan guard with fan as shown and secure it with two screws.

2. Attach plastic extension holder with fan.

3. Insert four fan mounts as shown.

Figure 33 Fan Module Installation (4048)

1. Attach the fan bracket with chassis bottom as shown and secure it with four screws.

2. Insert the fan module as shown. Ensure that alignment fan mount tabs and fan bar rails match up. Firmly press the fan module

downward.

RM133 Series

/ Installation │ 31

Figure 34 Fan Assembly Installation (4056)

1. Attach the fan guard with fan as shown and secure it with two screws.

2. Attach plastic extension holder with fan.

3. Insert four fan mounts as shown.

Figure 35 Fan Module Installation (4056)

1. Attach the fan bracket with chassis bottom as shown and secure it with four screws.

2. Insert the fan module as shown. Ensure that alignment fan mount tabs and fan bar rails match up. Firmly press the fan module

downward.

RM133 Series

/ Installation │ 32

Figure 36 Fan Assembly Installation (4056)

1. Attach the fan guard with fan as shown and secure it with two screws.

2. Insert four fan mounts as shown.

Figure 37 Fan Module Installation (4056)

1. Attach the fan bracket with chassis bottom as shown and secure it with four screws.

2. Insert the fan module as shown. Ensure that alignment fan mount tabs and fan bar rails match up. Firmly press the fan module

downward.

RM133 Series

/ Installation │ 33

Figure 38 Air Baffle Installation

1. Insert the air baffle into the securing slots until the tabs lock into place.

RM133 Series

/ Installation │ 34

2-8 PCI-e Card Installation

Figure 39 PCI-e Card Blank Removal

1. Remove the PCI-e blank.

2. Secure the riser card with PCI-e bracket with two screws.

3. Secure the PCI-e card with filler with two screws.

4. Firmly press the PCI-e card into the riser slot.

5. Firmly press the PCI-e riser securing into the M/B expansion slot.

Figure 40 PCI-e Card Installation

.

RM133 Series

/ Installation │ 35

2-9 PSU Installation

Figure 41 1U Single PSU Installation

Figure 42 1U Single PSU Installation

1. Secure the PSU bracket with two screws as shown.

2. Secure the PSU (bracket) with two screws on the bottom of chassis.

3. Secure the PSU with three screws on the rear window.

RM133 Series

/ Installation │ 36

Figure 43 1U RPSU Module Installation

1. Insert the PSU module into the PSU cage and push until it clicked into place.

Figure 44 1U RPSU Module Removal

1. Press and release latch as shown.

2. Carefully pull the PSU out of the chassis.

RM133 Series

/ Installation │ 37

2-10 Slide Rail Installation

Figure 45 Slide rail Installation (84H314610-003)

1. Attach the inner rail with the system while aligning the back shoulder screws on the side of the system with the back slots on the

inner rail.

Figure 46 Slide rail Installation (84H314610-003)

2. Engage the back shoulder screws into their slots.

RM133 Series

/ Installation │ 38

Figure 47 Slide rail Installation (84H314610-003)

3. Move the latch upward while securing the screw.

4. Secure the inner rail with one screw.

Figure 48 Slide rail Installation (84H314610-003)

5. Carefully install the system into the rack with two hands.

RM133 Series

/ Backplane │ 39

3. Backplane

Each drive carrier includes separate LED indicators for drive Activity and drive Status. Light pipes integrated into the drive carrier

assembly direct light emitted from LEDs mounted next to each drive connector on the backplane to the drive carrier faceplate,

making them visible from the front of the system.

Figure 49 Drive Tray LED Identification

Tabl e 7 Drive Power LED/Activity LED States

LED ICON LED Color Behavior Condition

A,C

Power LED

N/A Stay off Hard drive fault has occurred

Blue Solid on When power on

B,D Activity LED

Green Stay on When HDD is busy

Red

Solid on When HDD is failed

1Hz blink When HDD is rebuild

4Hz blink When HDD is locate

NOTE: The drive activity LED is driven by signals coming from the drive itself. Drive vendors may choose to operate the activity

LED different from what is described in the table above. Should the activity LED on a given drive type behave differently than

what is described, customers should reference the drive vendor specifications for the specific drive model to determine what

the expected drive activity LED operation should be.

RM133 Series

/ Backplane │ 40

3-1 Storage Backplane Optional

RM133 support below backplane.

 4 x 3.5” SATA 7-pin port to port passive backplane
 10 x 2.5” Mini SAS HD passive backplane
 10x 2.5” NVMe passive backplane

All available SAS/SATA/NVMe compatible backplanes include the following common features:

 12Gb/s SAS, 6Gb/s SAS/SATA, and PCIe Gen3 x4 NVMe
 SFF-8680 12Gb/s rated drive interface connectors, providing both power and I/O signals to attached devices
 SFF-8639 PCIe Gen3 x4 rated drive interface connectors, providing both power and I/O signals to attached devices
 Hot swap support for SAS/SATA/NVMe devices
 I2C interface from a 4-pin connector for device status communication to the BMC over slave SMBus
 LEDs to indicate drive activity and status for each attached device

Funct ion alit y

The microcontroller has a master/slave I2C connection to the server board BMC. The microcontroller is not an IPMB compliant device.

The BMC will generate SEL events by monitoring registers on the HSBP microcontroller for DRIVE PRESENCE, FAULT, and RAID

REBUILD in progress.

RM133 Series

/ Backplane │ 41

3-2 12G 3.5” 4 Port Passive Backplane

Tabl e 8 12G 3.5” 4 Port Passive Backplane

Specification

Host Interface SATA 7-pin

HDD Interface SAS / SATA

Hot-Swap

Yes, allows user to on line replace Hard Disk Drive

Display

LED indicates Hard Disk Drive status
Power LED – Blue (When HDD is present)
Access LED – Green (When HDD is busy)

Error LED – Red (When HDD is error)

Environment Monitor

Temperature senor detect(U2,U3)

Connectors 1. SFF-8680 *4

2. SATA 7-pin *4

3. Big 4P Power connector *2 for +5V/12V

4. I2C Connector *1

Dimension 426.6(L) x 26.8(W) x 2.4(H) mm

Material FR4 2 layer

Figure 50 12G 3.5” 4 Port Passive Backplane – front view

A. HDD_0

B. HDD_1

C. HDD_2

D. HDD_3

On the backside of the backplane are several connectors. The following illustration identifies each.

RM133 Series

/ Backplane │ 42

Figure 51 12G 3.5” 4 Port Passive Backplane – rear view

Tabl e 9 Label Description

Label Description Description

Drawing

A Power connector The backplane includes two 1

x4 connector

supplying power to the backplane. Power is routed
to the backplane via a power cable harness from the
Power Supply Modules.

B SATA 7-pin connector The backplane includes four SATA 7-pin connectors

providing data signals for four SAS/SATA drives on
the backplane. A cable can be routed from matching
connectors on the server board or add-in SAS/SATA
RAID cards.

C I2C connector The backplane includes a 1x4 connector used as a

management interface to the server board.

RM133 Series

/ Backplane │ 43

3-3 12G 2.5” 10 Port Passive Backplane

Tabl e 10 12G 2.5” 10 Port Passive Backplane

Specification

Host Interface Mini SAS HD

HDD Interface SAS / SATA

Hot-Swap Yes, allows user to on line replace Hard Disk Drive

Display

LED indicates Hard Disk Drive status
Power LED – Blue (When HDD is present)
Access LED – Green (When HDD is busy)

Error LED – Red (When HDD is error)

Environment Monitor Temperature senor detect(U3)

Connectors

1. SFF-8680 *10

2. Mini-SAS HD *3

3. ATX Mini Fit 4P Power connector *1 for +12V only

4. I2C Connector *1

Dimension 405.0(L) x 33.3(W) x 2.4(H) mm

Material FR4 6 layer

Figure 52 12G 2.5” 10 Port Passive Backplane – front view

A. HDD_0

B. HDD_1

C. HDD_2

D. HDD_3

E. HDD_4

F. HDD_5

G. HDD_6

H. HDD_7

I. HDD_8

J. HDD_9

RM133 Series

/ Backplane │ 44

On the backside of the backplane are several connectors. The following illustration identifies each.

Figure 53 12G 2.5” 10 Port Passive Backplane – rear view

Tabl e 11 Label Description

Label Description Description

Drawing

A Power connector The backplane includes a 2x2 connector supplying

power to the backplane. Power is routed to the

backplane via a power cable harness from the

Power Supply Modules.

B Mini-SAS HD connector The backplane includes three multi-port mini-SAS

HD cable connectors providing data signals for ten
SAS/SATA drives on the backplane. A cable can be
routed from matching connectors on the server
board or add-in SAS/SATA RAID cards.

C I2C connector The backplane includes a 1x4 connector used as a

management interface to the server board.

RM133 Series

/ Backplane │ 45

3.4 NVMe 2.5” 10 Port Passive Backplane

Tabl e 12 NVMe 2.5” 10 Port Passive Backplane

Specification

Host Interface OCuLink

HDD Interface NVMe

Hot-Swap Yes, allows user to on line replace Hard Disk Drive

Display

LED indicates Hard Disk Drive status
Power LED – Blue (When HDD is present)
Access LED – Green (When HDD is busy)

Error LED – Red (When HDD is error)

Environment Monitor Temperature senor detect(U3)

Connectors 1. SFF-8639 *10

2. OCuLink *10

3. SATA 7-pin *2

4. ATX Mini Fit 4P Power connector *2 for +12V only

5. I2C Connector *1

Dimension 405.0(L) x 37.33(W) x 2.4(H) mm

Material FR4 8 layer

Figure 54 12G Mini SAS HD 8 Port passive Backplane – front view

A. HDD_0

B. HDD_1

C. HDD_2

D. HDD_3

E. HDD_4

F. HDD_5

G. HDD_6

H. HDD_7

I. HDD_8

J. HDD_9

RM133 Series

/ Backplane │ 46

On the backside of the backplane are several connectors. The following illustration identifies each.

Figure 55 12G Mini SAS HD 8 Port passive Backplane – rear view

Tabl e 13 Label Description

Label Description Description

Drawing

A Power connector The backplane includes a 2x2 connector supplying

power to the backplane. Power is routed to the

backplane via a power cable harness from the

Power Supply Modules.

B OCuLink connector The backplane includes ten OCuLink connectors

providing data signals for ten NVMe drives on the
backplane. A cable can be routed from matching
connectors on the server board or add-in PCIe
switch cards.

C I2C connector The backplane includes a 1x4 cable connector used

as a management interface to the server board.

D

SATA 7-pin connector

The backplane includes two SATA 7-pin connectors

providing data signals for two SAS/SATA drives on
the backplane. A cable can be routed from matching
connectors on the server board or add-in SAS/SATA

RAID cards.

RM133 Series

/ Maintenance and Service │ 47

4. Maintenance and Service

DOA (Dead on Arrival)

If the products are found Defect On Arrival, please contact Chenbro’s regional sales or CQE and indicate the defective status via

email along with product photos and description. You may need to return the defective item by request.

The customer should ensure that the products are Defect On Arrival for up to three months from Chenbro’s shipping date and the

damage is not caused by shipping or failures resulting from accident, misuse, abuse, neglect, mishandling, misapplication,

modification, improper operation, improper repair or rework. CHENBRO is not responsible for the cost of replacement including the

delivery cost.

CHENBRO also reserves the right to examine the DOA products. If the damage of DOA products is caused by improper action as

described above, the customer will be liable for paying the related charge having occurred or paying the fee of the replacements if

the DOA products are totally scrapped.

TECHNICAL SUPPORT

Please provide following information when you apply our technical support:

 Product model name and/or part number
 Product serial number and bar code
 Buzzer beeping pattern and/or failure LED flashing pattern
 Detailed, specific questions

You may also contact Chenbro’s regional technical supports as below- Website: www.chenbro.com

CENBRO MICOM CO., LTD.

Email: [e-mail]

Tel: [phone]

Fax: [phone]

CHENBRO MICOM (USA) INC.

Email: [e-mail]

Tel: [phone]

Fax: [phone]

CHENBRO GmbH

Email: [e-mail]

Tel: + 49-2154-8142730

Apply a RMA

number

Return the product for

repair

Receive service

charge notice

Receive the repaired

product