
Solubility in Water
(Ether = 1)
Technical Data Sheet
Presaturated Wipes
IPA
PRODUCT DESCRIPTION
IPA Presaturated Wipes remove solder paste,
inks and other contaminants. These highly
effective cleaning wipes are ideal for all
general cleaning applications. In addition,
IPA Presaturated Wipes are well suited for
touch-up cleaning of automatic printer
stencils and cleaning of semi-automatic
printer stencils during and at the end of
production runs.
IPA Presaturated Wipes contain ultra-pure
Electronics Grade IPA. The wipes are
available in a convenient dispensing tub for
stencil and screen cleaning applic ations.
Plastic Safe
Lint free
Quick drying formula
Flammable
Regular Cleaning Strength
Upper Ozone Safe; CFC/HCFC Free
AVAILABILITY
SIP91P 100 Presaturated Wipes
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Specific Gravity
Evaporation Rate <1
Appearance Clear, Colorless L iquid
Percent Volatile
Shelflife
COMPATIBILITY
IPA Presaturated Wipes are generally
compatible with most materials. As with any
chemical product, component compatibility
must be determined on a non-critical area
prior to use.
0.81
Soluble
61o F
100%
2 years

USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
IPA Presaturat ed Wipes:
General cleaning: Wipe surfaces thoroughly
to remove contaminants.
Stencil cleaning: Wipe away residual solder
paste until surface is thoroughly cleaned.
Repeat with a clean wipe to remove any trace
contaminants.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
DISTRIBUTED BY:
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is zero.