Page 1
Boiling Point
>99°F Initial
Evaporation Rate >1
(butyl acetate=1)
Flash Point (TCC) None
Specific Gravity 1.28
Vapor Pressure @68°F 183 mm Hg
Appearance Clear, Colorless Liquid
Odor
Ethereal
Solubility in Water
Negligible
Dielectric Breakdown
30 kV
5 years
CHEMTRONICS
Technical Data Sheet
TDS # 2212
Pow-R-Wash
Contact Cleaner
PRODUCT DESCRIPTION
Pow-R-Wash NX New & Improved!
Contact Cleaner is a nonflammable cleaner
that quickly removes soils, oxides, and other
contaminates from metal electrical contacts.
This high pressure solvent system is
engineered to restore and improve electrical
continuity on all types of contacts,
connectors, and switches.
Same great f eatures as original,
without HCFC-141b
Removes encrusted oxides, dirt, grease
and other contaminants
Penetrates to clean hard to reach areas
Evaporates quickly
Nonflammable
Leaves no residues
Noncorrosive; safe for se nsitive metals
Available with All-Way Spray valve
Patent Pending
TYPICAL APPLICATIONS
Pow-R-Wash
Contact Cleaner cleans a nd deoxidizes:
Circuit Breakers
Monitors and Generators
Plugs and Sockets
Potentiometers
Printed Circuit Boards
Relay and Contacts
Selector Switches
Solenoids
Switching Devices
NX New & Improved!
NX New & Improved!
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
(ASTM D-877)
Shelf life
RoHS/WEEE
Status
COMPATIBILITY
Pow-R-Wash
Contact Cleaner is generally compatible
with most materials used printed circuit
board fabrication except acrylics, ABS
resins, polycarbonates and polystyrenes. As
with any cleaning agent, solvent/component
compatibility must be determined on a noncritical area prior to use.
NX New & Improved!
Page 2
Material
Compatibility
Buna-N
Not Recommended
Graphite
Good
HDPE
Good
Kynar
Poor
LDPE
Good
Lexan
Not Recommended
Neoprene
Poor
Noryl
Poor
Cross-Linked PE
Good
Polyacrylate
Not Recommended
Polystyrene
Not Recommended
PVC
Poor
Silicone Rubber
Not Recommended
Teflon
Good
Viton
Poor
Performance
Grease Removal per gram solvent (mg)
New & Im proved!
HFC-based Cleaner
0.50.5
Grease & Lubricating Oil Removal per gram
New & Im proved!
823.8
0.50.5
CFC
0.0%
VOC
46.8%
HCFC-141b
HCFC-225
0.0%
11.6%
HFC
nPB
39.2%
0.0%
Pow-R-Wash NX
solvent (mg)
Pow-R-Wash NX
15.66
23.823.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application
related questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC, HCFC-225, HCFC-141b, VOC, HFC, and
nPB percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
HFC-based Cleaner
USAGE INSTRUCTIONS
For commercial use only.
Read MSDS care fully prior to use.
Spray 4-6 inches from surface to clean.
Wash parts from top to bottom, allowing the
liquid to flush away dirt and dissolved
grease. For precise application use attached
extension tube.
AVAILABILITY
ES2212 18 oz. Aerosol
DISTRIBUTED BY:
Loading...