Page 1
Appearance
Clear, colorless liquid
Odor
Solubility in Water
Negligible
Vapor Pressure
207 mm Hg at 25°C
Specific Gravity
1.45 @ 75°F (23.9°C)
Surface Tension
15 dynes/cm
Evaporation Rate
<1 (Butyl Acetate = 1)
Boiling Point
Flash Point (TCC)
None
Kauri-Butanol (KB)
Number
Shelflife
5 years
RoHS Compliant
Yes
ODP
0%
HCFC 225
0%
HFC
0%
Chlorinated solvents
0%
nPB
0%
VOC Content:
Federal
Liquid
4.5%
Technical Data Sheet
Fiberwash™ NF Precision Fiber Optic Cleaner
Nonflammable, fast drying fiber optic cleaner
Part # FW2170
PRODUCT DESCRIPTION
FOCCUS™ Fi ber-Wash™ N F P recision Fiber
Optic C leaning P en contains a n onflammable
solvent cl eaner t hat q uickly and s afely cleans t he
end f ace o f f iber opt ic c onnectors, s plices and
ribbons. It a lso di ssipates s tatic c harge, w hich
prevents attracting airborne contamination that cling
to t he e nd f ace s urface. T he c leaning f ormulation
has f ast e vaporation a nd l ow odor , i s p lastic s afe,
residue f ree, a nd l ow VOC. T his non -pressurized
container can be easily and s afely t ransported. For
best r esults, us e w ith t he Q bE® Cleaning P latform
or CCT ™ Cl ear Connection Tool, with t he
Combination Cleaning™ process.
• Specifically f ormulated f or c leaning all f iber
optic connectors
• Removes handling soils, dus t, oils and airborne
contamination
• Nonflammable and low odor
• Residue free, fast evaporating and low VOC
Portable and easily transportable
• Cleans a lone, w ith th e QbE C leaning P latform,
or with the CCT™ Clear Connection Tool
• Cleans an d el iminates el ectrostatic ch arges
which attract airborne contaminants
• Plastic s afe a nd c ompatible f or a ll f iber o ptic
connectors
• Approximately 400 end face cleanings per pen
TYPICAL APPLICATIONS
Fiberwash NF Precision Fiber Optic Cleaner can be
used f or all r epair an d m aintenance f iber o ptic
applications including:
• Connector end face cleaning
• Cleaning fiber and splice trays pre-splice
• Cleans tools and meters
• Cleans cables
• All repair and maintenance spot cleaning
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Ethereal
129°F / 54°C
28
SAFETY & ENVIRONMENTAL*
CARB
SCAQMD
* ODP, HCFC-225, Chlorinated Solvent, VOC, HFC, and nPB
percentages shown are the content by weight. Volatile Organic
Compound (VOC) information is calculated on a weight basis
using the VOC definition of California Air Resources Board
(CARB) Consumer Product Regulations, South Coast Air Quality
Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
4.5%
67 g/L
Page 2
COMPATIBILITY
Material
Compatibility
ABS
Excellent
Buna-N
Excellent
EPDM
Excellent
Graphite
Excellent
HDPE
Excellent
Kynar
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Noryl
Excellent
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Excellent
Polystyrene
Good
PVC
Excellent
Silicone Rubber
Excellent
Teflon
Excellent
Viton
Excellent
Fiberwash NF Precision F iber Optic C leaner is
compatible w ith mo st ma terials u sed in
telecommunications. A s w ith a ny s olvent,
compatibility w ith s ubstrate s hould be de termined
on a non-critical area prior to use.
AVAILABILITY
FW2170 11g (0.39 oz.) Pen
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics pr ovides a technical hot line to answer
your t echnical and ap plication r elated q uestions.
The toll free number is: 1-800-TECH-401.
www.chemtronics.com
askchemtronics@chemtronics.com
NOTE:
This information is b elieved to b e accurate. I t i s
intended for pr ofessional e nd us ers ha ving t he s kills t o
evaluate an d u se t he d ata p roperly. C HEMTRONICS
does not guarantee the accuracy of the data and assumes
no l iability in c onnection with d amages in curred w hile
using it.
Chemtronics® and Q bE® a re r egistered t rademarks o f Chemtronics. A ll
rights r eserved. Fiberwash™ a nd Controlwipes™ a re t rademarks o f
Chemtronics. All rights reserved.
All o ther t rademarks herein are t rademarks or registered trademarks
of their respective owners.
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
1. Hold pe n v ertically a nd depress tip. For su rfaces
other t han e ndfaces, r ub pe n on s urface t o be
cleaned.
2. For e ndface c leaning, us e w ith Q bE® C leaning
Platform. When using with a QbE Cleaning System,
pull one QbE wipe over the F iber-Safe foam p laten
and depress the p en tip onto t he wipe to start liquid
flow.
3. Apply a small amount (1" diameter) of Fiberwash NF
Precision F iber O ptic C leaner onto t he wipe. F ollow
the Combination Cleaning process as follows:
• Hold t he end-face at 9 0º pe rpendicular to t he Q bE
platen; a llow th e e nd-face t o gl ide o ver w ipe.
Remember to adjust for APC connections
• Draw t he e nd-face lightly ov er t he pl aten i n a
smooth linear motion
• Do not press too hard
• Do not retrace your cleaning procedure in the same
area
• Do not u se a figure-eight motion; do not us e a
"twist & turn" motion
• Check y our w ork w ith a f iber sco pe o r m easuring
device
DISTRIBUTED BY:
Loading...