Page 1
Appearance
Clear, colorless liquid
Odor
Solubility in Water
Negligible
Specific Gravity
0.72 @ 75oF (23.9°C)
Evaporation Rate
<1 (Butyl Acetate = 1)
Boiling Point
239°F / 115°C
Shelflife
5 years
RoHS Compliant
Yes
ODP
0%
HCFC 225
0%
HFC
0%
Chlorinated solvents
0%
nPB
0%
VOC Content:
Liquid
Technical Data Sheet
Fiberwash™ MX Precision Fiber Optic Cleaner
Powerful & efficient fiber optic cleaner
Part # FW2150
PRODUCT DESCRIPTION
FOCCUS™ Fi ber-Wash™ M X P recision F iber
Optic C leaning P en c ontains a pow erful s olvent
cleaner t hat q uickly and safely cleans t he en d f ace
of fiber optic connectors, splices and ribbons. It also
dissipates s tatic ch arge, w hich p revents at tracting
airborne c ontamination that c ling t o t he e nd f ace
surface. The cleaning formulation is plastic safe and
residue f ree. T his non-pressurized container c an be
easily and s afely t ransported. F or b est r esults, use
with the QbE® Cleaning Platform or CCT™ Clear
Connection Tool a nd the C ombination C leaning™
process.
• Powerful, fast-acting solvent cleaner
• Removes b roadest r ange o f s oils: dus t, oi ls,
greases, bu ffer gel, s oils, c omplex s oils, s alts
and other contaminants
• Residue free with fast evaporation
• Portable
• Cleans c onnectors with Q bE® Cleaning
Platform or with CCT™ Clear Connection Tool
• Dissipates s tatic ch arge w hich can at tract
airborne contaminants
• Plastic s afe a nd c ompatible f or a ll f iber o ptic
connectors
• Approximately 400 end face cleanings per pen
TYPICAL APPLICATIONS
Fiberwash M X Precision F iber O ptic C leaner can
be us ed f or a ll r epair a nd m aintenance f iber opt ic
applications including:
• Connector end face cleaning
• Cleaning fiber and splice trays pre-splice
• Cleans tools and meters
• Cleans cables
• Removes road tar and asphalt grime
• All repair and maintenance spot cleaning
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Hydrocarbon
Flash Point (TCC)
Kauri-Butanol (KB)
Number
SAFETY & ENVIRONMENTAL*
CARB
SCAQMD
Federal
* ODP, HCFC-225, Chlorinated Solvent, VOC, HFC, and nPB
percentages shown are the content by weight. Volatile Organic
Compound (VOC) information is calculated on a weight basis
using the VOC definition of California Air Resources Board
(CARB) Consumer Product Regulations, South Coast Air Quality
Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
45°F / 7°C
29
100.0%
720 g/L
100.0%
Page 2
COMPATIBILITY
Material
Compatibility
ABS
Excellent
Buna-N
Excellent
EPDM
Good
Graphite
Excellent
HDPE
Excellent
Kynar
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Noryl
Excellent
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Excellent
Polystyrene
Excellent
PVC
Excellent
Silicone Rubber
Good
Teflon
Excellent
Viton
Excellent
Fiberwash MX Precision F iber O ptic C leaner is
compatible w ith mo st ma terials used i n
telecommunications. A s w ith a ny s olvent,
compatibility w ith s ubstrate s hould be de termined
on a non-critical area prior to use.
AVAILABILITY
FW2150 9g (0.32 oz.) Pen
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your t echnical and ap plication r elated q uestions.
The toll free number is: 1-800-TECH-401.
www.chemtronics.com
askchemtronics@chemtronics.com
NOTE:
This information is b elieved to b e accurate. I t i s
intended for professional e nd users ha ving the s kills t o
evaluate an d u se t he d ata p roperly. C HEMTRONICS
does not guarantee the accuracy of the data and assumes
no liability in c onnection with d amages incurred while
using it.
Chemtronics® and Q bE® a re r egistered t rademarks o f Chemtronics. A ll
rights r eserved. Fiberwash™ a nd Controlwipes™ a re t rademarks o f
Chemtronics. All rights reserved.
All o ther trademarks herein are t rademarks o r re gistered trademarks
of their respective owners.
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
1. Hold pe n v ertically a nd depress tip. For su rfaces
other than endfaces, rub pen on surface to be cleaned.
2. For endface cleaning, use with Q bE® Cleaning
Platform. When using w ith a Q bE Cleaning S ystem,
pull one QbE wipe ov er the Fiber-Safe f oam platen
and de press the pe n tip on to t he wipe t o start l iquid
flow.
3. Apply a small amount (1" diameter) of Fiberwash NF
Precision F iber O ptic C leaner onto the w ipe. Follow
the Combination Cleaning process as follows:
• Hold t he end-face at 9 0º pe rpendicular to t he Q bE
platen; a llow th e e nd-face t o gl ide o ver w ipe.
Remember to adjust for APC connections
• Draw t he e nd-face lightly ov er t he pl aten i n a
smooth linear motion
• Do not press too hard
• Do not retrace your cleaning procedure in the same
area
• Do not u se a figure-eight motion; do not us e a
"twist & turn" motion
• Check your w ork with a fiber sco pe or m easuring
device
DISTRIBUTED BY:
Loading...