Chemtronics ES710V User Manual
@ 77°F
@ 77°F F/1 atm
Liquified Gas
TDS # 1020K
CHEMTRONICS
Technical Data Sheet
Ultrajet Duster System
PRODUCT DESCRIPTION
Ultrajet Duster System is a high pressure
duster that cleans electronics without
scratching delicate surfaces. This
duster/cleaner is nonflammable, residue-free
and won’t scratch delic ate surfaces.
Filtered to 0.2 microns
Nonflammable
Leaves no residue
High pressure for contamination control
Nonabrasive
Excellent mate rial compatibility
Penetrates hard to reach areas
Contains no ozone depleting com pounds
TYPICAL APPLICATIONS
Ultrajet
aspects of electronic equipment maintenance
and is particularly suited f or applications
involving:
Audio/Video Equipm ent
Computers and Othe r Electronic
Fax Machines
Lab Instruments
Photo Equipment
Printed Circuit Boards
Printers
Surface Mount Device s
Duster System is engineered for all
Equipment
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.7°F
Vapor Density (air=1)
Solubility in Water
Specific Gravity
(water = 1 @77°F)
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless
Odor
Surface Tension
(dynes/cm @77°F)
Flash Point (TCC)
Shelflife 5 years
COMPATIBILITY
Ultrajet
compatible with most materials used in
printed circuit board fabrication, including
sensitive plastics and compounds. As with
any duster/cleaner, compatibility must be
determined on a non-cr itical area prior to use.
Duster System is generally
3.18
0.10% by weight
1.21
Slight Ethereal
7.8
None
Material
Compatibility
Buna-N
Excellent
Graphite
Excellent
HDPE
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Cross-Linked PE
Excellent
Polyacrylate
Excellent
Polystyrene
Excellent
PVC
Excellent
Silicone Rubber
Excellent
Teflon
Excellent
Viton
Excellent
PERFORMANCE
Pressure PSI G / Temperature F
200 - P 150 S - I 100 G - 50 - 0
20
40
60
80
100
120
140
Temperature F
CFC
0.0%
VOC
0.0%
HCFC
0.0%
HFC
100.0%
CL Solv.
0.0%
ODP
0.0
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401
.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS care fully prior to use.
No special surface preparation is required
prior to using Ultrajet
Duster System. Direct
high pressure spray onto the a rea to be
cleaned to remove dust, dirt and other
contaminant. For optimum performance and
pin point control, use with the attached
extension tube.
AVAILABILITY
ES1020K 10 oz. Aerosol Kit
ES1020R 10 oz. Refill
ES710V Chrome Trigger Valve
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is 0.0. It is the sum of the ODP of the
substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE:
This information is believed to be accurate . It is intended
for professional end users having the skills to evaluate and
use the data properly. CHEMTRONICS does not
guarantee the accuracy of the data and assumes no liability
in connection with damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. E (08/13)
DISTRIBUTED BY:
Loading...