Evaporation Rate (Butyl acetate=1) >1
Appearance Clear, colorless liquid
Surface Tension
(dynes/cm @ 25°C)
VOC* Content: Aerosol Liquid
RoHS Compliant
Liquids 2 years after opening
CHEMTRONICS
Technical Data Sheet
Electro-Wash CZ
PRODUCT DESCRIPTION
Electro-Wash CZ Cleaner Degreaser is an all
purpose cleaner for electronics that is
nonflammable, non-ozone depleting, and safe
on plastics. This fast drying precision cleaner
contains Chemtronics’ Cirozane
based on new HFE tec hnology. It is excellent
for removing grease, oil, and flux residues
from energize d equipment.
MIL-PRF-29608A (AS) Class C approved
Removes dirt, oil, grease, flux and many
other contaminants
Nonflammable
Excellent mate rial compatibility
Non-ozone depleting
Leaves no residues
Evaporates quickly
Low Odor
Contains no CFCs, HCFC s, or
1,1,1 Trichloroethane
TYPICAL APPLICATIONS
Electro-Wash
CZ Cleaner Degreaser is
excellent for cleaning:
Printed Circuit Boards
Contacts
Cable Assemblie s
Sensitive Plastic Surfaces
Magnetic Heads
Electronic Controls
Edge Connectors
Light Flux Residues
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Cleaner Degreaser
, which is
(ASTM D-877)
CARB 38% 100%
SCAQMD 187 g/L 373 g/L
Shelflife Aerosols 5 years
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air Quality
Management District (SCAQMD) R ule 102 and the Federal definition
published in 40 CFR 51.100(s).
COMPATIBILITY
Electro-Wash
generally compatible with most materials used
in the electronics industry. With any cleaning
agent compatibility must be determined on a
non-critical area prior to use.
TDS # 7100
CZ Cleaner Degreaser is
Milligrams of Multi-Purpose Oil Removed
Hydrochlorofluorocarbons (HCFCs) are regulat ed u nder th e Mont real Protocol as
Class II ozone depleting substances. HCFC-141b is no longer produced in the
US under this legislation. HCFC-225 is planned for production phase-out in
2015. Hydrofluorocarbons (HFCs) are not currently regulated.
EPA has listed n-propyl bromide (nPB) as an acceptable alternative to ozone
depleting substances in metal, precision, and electronics cleaning under Section
612 of the Clean Air Act.
ENVIRONMENTAL IMPACT DATA
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions. The
toll free number is: 1-800-TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills to
evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
Electro-Wash a nd Chemtronics are registered trademarks of
Chemtronics. All rights reserved.
Cirozane, is a trademark of Chemtronics. All rights reserved.
All other trademarks herein are trademarks or registered
trademarks of their respective owners.
REV. H (08/13)
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean. Wash parts
from top to bottom, allowing the liquid to flush away
flux residues, dirt and dissolved oil. For precise
application use attached extension tube.
AVAILABILITY
ES7100 12 oz. Aerosol
ES7101 1 Gallon Liquid
DISTRIBUTED BY: