Page 1
Boiling Point
300° F
Initial
Evaporation Rate
<1
Flash Point (TCC)
105
Specific Gravity
0.78
Vapor Pressure @68°F 2.0 mmHg
Appearance Clear, colorless liquid
Odor
Mild Citrus
Solubility in Water
Negligible
Dielectric Breakdown
62 kV
NSF-Registered C1 #139462 (aerosol)
CHEMTRONICS
TDS # 2289
Technical Data Sheet
Max-Kleen™ Citrus
The citrus-based extr a-strength, heavy-duty degreaser
PRODUCT DESCRIPTION
Max-Kleen™ Citrus is ideal for removal of all
types of soils including oxidized grease, sludge,
wax, tar and oil. The moderate evaporation rate
increases the cleaning power for hard-to-remove
soils. The low surface tension provides for
superior wetting to clean in even the tightest
spots. Max-Kleen
NSF as a C1 cleaner for use in food processing
facilities.
• Citrus-based formula with moderate
evaporation rate
• Quickly removes all types of tough soils
including oxidized oil and grease
• Safe for use on most metals and plastics
• Does not contain chlorinated solvents
• Flashpoint greater than 100º F
• Non-corrosive and nonconductive
• Low Toxicity
• Leaves no residue
TYPICAL APPLICATIONS
Max-Kleen
maintenance, and manufacturing applications
including:
• Removes grease, oil and lubricants
• Ideal for metal parts cleaning and tools
• All repair and maintenance cleaning
• Cleans contacts, relays, switches, circuit
breakers and test probes
• Cleans electric motors and gasoline engines
• Removes tough soils from gears and pulleys
• Use for maintenance of air compressors
• Cleans inks and residues from printing
presses
• Effective adhesive residue remover
™
Citrus can be used for all repair,
™
Citrus is registered with the
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
(butyl acetate=1)
° F
(ASTM D-877)
Kauri-Butanol
45
(KB) Number
Shelf life 5 years
#139463 (bulk)
COMPATIBILITY
Max-Kleen
metals and plastics. As with any solvent,
compatibility with substrate should be
determined on a non-critical area prior to use.
™
Citrus is compatible with most
Page 2
Material
Compatibility
ABS
Good
Buna-N
Good
EPDM
Fair
Graphite
Excellent
HDPE
Excellent
PVDF
Excellent
LDPE
Good
Lexan
Good
Neoprene
Good
Noryl
Excellent
Nylon 66
Excellent
Polycarbonate
Good
Polypropylene
Good
Polystyrene
Fair
PVC
Fair
Silicone Rubber
Fair
Teflon
Excellent
Viton
Excellent
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
Sp ra y 4-6 in ches from surface to clean. Wash parts
from top to bottom, allowing the liquid to flush
away dirt and dissolved grease. For precise
application use attached extension tube.
For wipe applications, wet a Controlwipes™ Wipe
with Max-Kleen™ Citrus and wipe away soils.
When used to clean food equipment that will be
returned to a food processing area, wash MaxKleen™ Citrus off the equipment and then rinse well
with potable water.
SAFETY & ENVIRONMENTAL DATA
SAFETY & ENVIRONMENTAL DATA
AVAILABILITY
ES2289 15 oz aerosol
ES189 1 gallon liquid
ES589 5 gallon liquid
ES5589 55 gallon liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is: 1-800-TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
Chemtronics is a registered trademark of Chemtronics. All rights
reserved. Max-Kleen and Controlwipes are trademarks of
Chemtronics. All rights reserved.
All other trademarks herein are trademarks or registered
trademarks of their respective o wner s .
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV D (08/13)
DISTRIBUTED BY:
CFC 0.0% VOC 100%
HCFC-225 0.0% HFC 0.0%
HCFC-141b 0.0% nPB 0.0%
Loading...