Page 1
5 years
CHEMTRONICS
Technical Data Sheet
Static Free Plast-N-Glas
TDS # 1668
PRODUCT DESCRIPTION
Static Free Plast-N-Glas effectively cleans,
polishes and eliminates static charges. A
single application dissipates electrostatic
buildup while also removing dirt, grease, ink,
fingerprints and nicotine stains. Static Free
Plast-N-Glas
will not streak, smear, scratch,
or abrade. Leaves surfaces thoroughly clean
for improved optical clarity and distortionfree reading.
For use on nonporous transparent surfaces
Cleans and controls static in one
application
Reduces attraction of dust, dirt and other
airborne contamina nts
Nonstreaking foam ing spray will not “run”
or drip
Controls buildup of potentially harmful
electrostatic charges
Noncorrosive
Nonabrasive, nonflammable
TYPICAL APPLICATIONS
Static Free
Plast-N-Glas effectively cleans
and polishes:
Control panels, Computer Housings,
Oscilloscopes
Laboratory, Engineering and Office
Equipment
Medical Equipme nt
Photographic Processing Equipment,
Graphic Arts Tables
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Specifications and Physical
Properties
Appearance Foamy White Spray
Odor Clean Fresh Scent
Spray Type Dense Non-Dripping Foam
Can Pressure
55 PSIG
@ 77°F (25°C)
pH (Liquid Only) 9.0
Flame Proje ction Test Nonflammable
Shelflife
RoHS/WEEE
Status
COMPATIBILITY
Static Free
Plast-N-Glas is excellent for
use on glass and most plastics. As with any
cleaning product, compatibility with substrate
must be determined on a non-critical area
prior to use.
Page 2
Material
Compatibility
ABS
Excellent
Buna-N
Excellent
EPDM
Excellent
Graphite
Excellent
HDPE
Excellent
Kynar
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Excellent
Polystyrene
Excellent
PVC
Excellent
Silicone Rubber
Excellent
Teflon
Excellent
Viton
Excellent
CFC
0.0%
VOC
11.1%
HCFC
0.0%
HFC
0.0%
CL Solv.
0.0%
ODP
0.0
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS care fully prior to use.
Shake well before using. Spray lightly 8-12
inches from surfa ce. Wipe and polish with
clean lint-free cloth such as Che mtronics
Controlwipes.
AVAILABILITY
ES1668 14 oz. Aerosol
ES1668E 14 oz. Aerosol (EU)
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP ) is determined in acco rdance with the
Montreal Protocol and U.S. Clean Air Act of 1990.
The ODP of this product is 0.0. It is the sum of the
ODP of the substances that may contribute to the
depletion of stratospheric ozone, based upon the
weight of each substance in the product’s formulation.
Chemtroni cs® is registered trademark s of Chemtronics. All rights reserved.
Static Free™ is a trademark of Chemtronics. All right s reserved.
All other trademarks herein are trademarks or registered trad ema rks of their
respecti ve o wners.
NOTE:
This information is believed to be accurate. It
is intended for professional end users having
the skills to evaluate and use the data
properly. CHEMTRONICS does not
guarantee the accuracy of the data and
assumes no liability in connection with
damages incurre d while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
DISTRIBUTED BY:
REV. G (08/13)
Loading...