Page 1
Specific Gravity 0.997 g/ml
VOC* Content:
Federal 5%
CHEMTRONICS
Technical Data Sheet
Static Free Mat & Benchtop Reconditioner
TDS # 1664T
PRODUCT DESCRIPTION
Static Free Mat & Benchtop Reconditioner is an
excellent surface treatment specifically engineered
for use in ESD sensitive environments. Static
Free
and lifts light oils, fingerprints and flux residues
from surfaces while providing static dissipative
protection.
Mat & Benchtop Reconditioner penetrates
Excellent for use on nonporous opaque
surfaces
Will not dry mat surfaces with repeated use
Safe for use on most fabrics
Long-lasting dissipative protection; up to 30
days
Effective in relative humidities below 15%
Chloride and amine free formulation
Noncorrosive
Meets static decay criteria of
MIL-B-891705C
Nonflammable
Safe on surfaces not harmed by water
Nonabrasive
TYPICAL APPLICATIONS
Static Free
Mat & Benchtop Reconditioner
cleans and adds static dissipative protection to:
Benchtops and Storage Cabinets
Production/Assembly Surfaces
Static Dissipative/Antistatic Mats
Many porous and non-porous materials
Tool Cribs
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Specifications and Physical Properties
Appearance Clear Liquid
Odor Pleasant/Clean
(@ 77°F (25°C)
pH 6.0
Flashpoint (TCC) None to Boiling
Shelflife 2 years after opening
CARB 5%
SCAQMD 50 g/L
RoHS/WEEE
Status
COMPATIBILITY
Static Free Mat & Benchtop Reconditioner is
excellent for use on most surfaces not har med by
water. As with any cleaning product,
compatibility must be determined on a non-critical
area prior to use.
AVAILABILITY
ES1664T 16 fl. oz. Trigger Spray
ES3264 32 fl. oz. Tr igger Spray
ES164 1 gallon
Page 2
Material
Compatibility
ABS
Excellent
Buna-N
Excellent
EPDM
Excellent
Graphite
Excellent
HDPE
Excellent
Kynar
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Excellent
Polystyrene
Excellent
PVC
Excellent
Silicone Rubber
Excellent
Teflon
Excellent
Viton
Excellent
STATIC DECAY RATE IN SECONDS
7 _ Competitor #2
6 _ Competitor #1
5
_ 4 _ 3 _ 2 _
Chemtronics
1
_
INITIAL 15 DAYS
TIME LAPSE OF TREAMENT
Atmospheric Conditioons: 12% RH
CFC
0.0%
VOC
5.0%
HCFC
0.0%
HFC
0.0%
CL Solv.
0.0%
ODP
0.0
Static Free Mat & Benchtop Reconditioner
USAGE INSTRUCTIONS
For industria l use on l y.
Read MSDS carefully prior to use.
Spray gener ously 6-12 inches from surface to
be treated. Allow product to pe ne t rat e.
Surfaces can be wiped clean with
Chemtronics
Controlwipes or
Twillwipes.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential (ODP)
is determined in accordance with the Montreal Protocol and
U.S. Clean Air Act of 1990. The ODP of this product is
0.0. It is the sum of the ODP of the substances that may
contribute to the depletion of stratospheric ozone, based
upon the weight of each substance in the product’s
formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate and
use the data properly. CHEMTRONICS does not guarantee
the accuracy of the data and assumes no liability in
connection with damages incurred while using it.
Chemtronics® is registered tradema rks of Chemtr onics. All rights reserved.
Static Free™ is a tradema r k o f C hemtronics. All rights reser ved.
All other trademarks herein are trademarks or registered trademarks of their
respecti ve o wners.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
DISTRIBUTED BY:
REV. G (08/13)
Loading...