Chemtronics ES1629 User Manual
Boiling Point
156° F (Initial)
Evaporation Rate
>1
Flash Point (TCC)
None
Specific Gravity
1.35
Vapor Pressure @68°F 112 mmHg
Appearance Clear, colorless liquid
Odor
Mild
Solubility in Water
Negligible
Dielectric Breakdown
23.5 kV
CHEMTRONICS
Technical Data Sheet
Kontact Restorer New & Improved!
Cleaner Lubricant
TDS # 1629
PRODUCT DESCRIPTION
Kontact Restorer New & Improved!
Cleaner Lubricant is specially engineered to
clean, lubricate and protect connectors in
one easy step. This nonflammable
cleaner/lubricant will clean contact surfaces
and provide a long-lasting protective film
that protects the contact from corrosion.
Same great f eatures as original,
without HCFC-141b
Nonflammable
Deep penetrating aerosol spr ay
Minimizes friction and metal wear
Protects metal c ontacts from car bon
build-up
May be used on energiz ed equipment
Cleans and lubricates hard to re ach areas
TYPICAL APPLICATIONS
Kontact Restorer
New & Improved!
Cleaner Lubricant ef fectively cleans:
Circuit Breakers
Contact Breaker Points
Distribution Panels
Intersurface Connector s
Motors and Generators
Plugs and Sockets
Potentiometers
Relay Contacts
Solenoids
Switching Devices
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
(butyl acetate=1)
(ASTM D-877)
Kauri-Butanol
125
(KB) Number
Shelflife 5 years
COMPATIBILITY
New & Improved Kontact Restorer is generally
compatible with most materials used in electrical
and electronic assemblies, except acrylics, ABS
resins, polycarbonates and polystyrenes. With
any chemical solvent/component compatibility
must be determined on a non-critical area prior
to use.
Material
Compatibility
ABS
Non-Compatible
Buna-N
Fair
EPDM
Fair
Graphite
Excellent
HDPE
Excellent
LDPE
Excellent
Lexan
Fair
Neoprene
Fair
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Excellent
Polystyrene
Non-Compatible
PVC
Excellent
Silicone Rubber
Poor
Teflon
Excellent
Viton
Fair
Performance
Grease Removal per gram solvent (mg)
New & Improved!
HFC-based Cleaner
0.50.5
Grease & Lubricating Oil Removal per gram
823.8
0.50.5
CFC
0.0%
VOC
87.0%
HCFC– 141b
HCFC-225
0.0%
0.0%
HFC
nPB
10.0%
87.0%
to evaluate and use the data properly.
Kontact Restorer
solvent (mg)
Kontact Restorer
New & Improved!
15.46
22.523.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your tec hnical and application related
questions. The toll free number is: 1-800-
TECH-401
.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
CHEMTRONICS does no t guarantee t he accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (08/13)
HFC-based Cleaner
USAGE INSTRUCTIONS
For commercial use only.
Read MSDS care fully prior to use.
Spray 4-6 inches from surface to be
lubricated or protected. For precise
application use attached extension tube.
Collect run-off for proper disposa l.
AVAILABILITY
ES1629 12 oz. Aerosol
DISTRIBUTED BY:
Loading...