
Technical Data Sheet
Typhoon Blast™ All-Way Duster
TDS # 1624
PRODUCT DESCRIPTION
Typhoon Blast™ All-Way Duster can be sp rayed rightside up and upside down emitting a high pressure blast
that cleans electronics without scratching delicate
surfaces. This compressed gas duster offers exceptionally
low global warming impact (GWP = 6) when compared to
traditional dusters utilizing HFC-134a (GWP = 1300) or
HFC-152a (GWP = 140)*. This moist u re fr ee a n d o il fr ee
duster provides the cleanest and most efficient, noncontact method available for particle removal. It is also
efficient as a means to quickly remove slow-drying
solvents.
High pressure duster sprays any direction, even
upside down
Ideal for particle rem ov al and contamination control
Useful for drying and removing solvents from
surfaces
Ultra-low global warming impact of 6
Nonflammable
Nonabrasive and Noncorrosive, Leaves no residue
Ultra-pure, filtered to <0.2 microns
CFC, HCFC and HFC free
VOC free
TYPICAL APPLICATIONS
Typhoon Blast™ All-Way Duster is engineered for all
aspects of electronic equipment maintenance and is
particularly suited for applications involving:
Audio/Video Equipment
Computers and Other Electronic Equipment
Telephone Junction Panels
Network Routers and Switches
Lenses and Optical Surfaces
Office Equipment, Paper Shredders, Fax
Machines and Printers
Laboratory Instruments
Photo Equipment
Printed Circuit Boards
Electrical Connectors and Contacts
TYPICAL PRODUCT DATA AND PHYSICAL
PROPERTIES
- 2 °F / -19 °C
47 psia @ 70 °F
Vapor Density (air=1)
Solubility in Water
@ 77°F F/1 atm
Specific Gravity
(water = 1 @77°F)
Evaporation Rate >1
(butyl acetate=1)
Liquified Gas
Odor
Flash Point (TCC)
Shelflife
RoHS/WEEE
Status
*Global warming potential (GWP) is calculated based on a 100
year time horizon. Carbon dioxide has a GWP of 1.
4.0
0.10% by weight
1.17
Clear, Colorless
Slight Ethereal
6.0*
None
COMPATIBILITY
Typhoon Blast™ All-Way Duster is generally
compatible with most materials used in printed
circuit board fabrication, including sensitive plastics
and compounds. As with any duster/cleaner,
compatibility must be determined on a non-critical
area prior to use.

Pressure PSIG / Temperature F
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required prior to
using Typhoon Blast™ All-Way Duster. Dir ect high
pressure spray onto the area to be cleaned to remove
dust, dirt and other contaminant. For optimum
performance and pin point control, use with the
attached extension tube.
AVAILABILITY
ES1624 8 oz. All-Way Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions. The
toll free number is: 1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990. The
ODP of this product is 0.0. It is the sum of the ODP of
the substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
VOC
consideration is based on the materials being not
photochemically reactive by Commonly Used
Standards (material supplier).
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee th e accura cy of
the data and assumes no liability in connection with
damages incurred while using it.
Chemtronics® is a registered trademark of Chemtronics. All
rights reserved. Typhoon Blast™ is a trademark of
Chemtronics. All rights reserve d.
All other trademarks herein are trademarks or registered
trademarks of their respective owners.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. B (08/13)
DISTRIBUTED BY: