
Vapor Pressure @68°F 112 mmHg
Appearance Clear, colorless liquid
Technical Data Sheet
Electro-Wash NR New & Improved!
Cleaner Degreaser
TDS # 1614
PRODUCT DESCRIPTION
Electro-Wash NR New & Improved!
Cleaner Degreaser is a nonflammable cleaner
that quickly removes flux, grease, oils, dirt,
dust, and other contaminants from electronic
components and assemblies. This high
pressure solvent system is engineered to
remove all types of oil and grease while
evaporating quickly and lea ving no residues.
Same great features as original,
without HCFC-141b
Removes flux, oils, dirt, grease, dust, and
other contaminants
Nonflammable; can be used on energize d
equipment
Penetrates to clean hard to reach areas
Evaporates quickly
Leaves no residues
Noncorrosive; safe for se nsitive metals
Available with All-W a y Spray valve
TYPICAL APPLICATIONS
Electro-Wash
Cleaner Degrease r removes flux, dirt, grease,
oxidation and other soils from:
Printed Circuit Boards
Relays and switche s
Transformers
Mechanical Devices
Electric Motors and Ge nerators
Electronic Controllers
Pneumatic / Hydraulic Systems
NR New & Improved!
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
(butyl acetate=1)
(ASTM D-877)
Kauri-Butanol
(KB) Number
Shelflife 5 years
COMPATIBILITY
Electro-Wash
Cleaner Degreaser is generally compatible
with most materials used in printed circuit
board fabrication, except acrylics, ABS
resins, polycarbonates and polystyrenes. As
with any cleaning agent solvent/component
compatibility must be determined on a noncritical area prior to use.
NR New & Improved!
125

Grease Removal per gram solvent (mg)
Grease & Lubricating Oil Removal per gram
AVAILABILITY
ES1614 12 oz. Aerosol
ES114 1 gallon Liquid
ES5514 55 gallon Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your tec hnical and application related
questions. The toll free number is:
TECH-401.
1-800-
ES1614 - ENVIRONMENTAL DATA
ENVIRONMENTAL IMPACT DATA
Electro-Wash NR
solvent (mg)
Electro-Wash NR
New & Improved!
HFC-based Cleaner
15.46
22.523.
USAGE INSTRUCTIONS
For commercial use only.
Read MSDS carefully prior to use.
Spray 4 to 6 inches from surface to clean.
Wash parts from top to bottom, allowing the
liquid to flush away dirt and dissolved
grease. For precise application use attached
extension tube.
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does no t guarantee t he accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
DISTRIBUTED BY:
REV. C (08/13)