Chemtronics ES1607 User Manual
Boiling Point
102F (Initial)
Flash Point (TCC)
None
Solubility in Water
@ 77F/1 atm
5% by weight
Specific Gravity
(water = 1@ 77F)
1.32
Evaporation Rate
(butyl acetate=1)
>1
Appearance Clear, colorless liquid
Odor
Ethereal
Surface Tension
(dynes/cm @ 25C)
14.9
Dielectric Breakdown 15 kV
(ASTM D-877)
Kauri-Butanol 120
(KB) Number
Shelflife Aerosols 5 years
Liquids 2 years after opening
VOC* Content: Aerosol Liquid
CARB 73% 100%
SCAQMD 492 g/L 660 g/L
Federal 38% 50%
TDS # 1607
CHEMTRONICS
Technical Data Sheet
Electro-Wash ®NXO Cleaner/Degreaser
PRODUCT DESCRIPTION
Electro Wash® NXO Cleaner/Degreaser is a nonozone depleting, extra strength, nonflammable
cleaner degreaser. This high pressure aerosol
cleaning agent quickly removes oxide particles, dust,
light grease and oil, then evaporates quickly, leaving
no residue.
Noncorrosive safe for metals
Nonflammable
Fast Drying
Removes oil, grease, dirt, silicone, flux, adhesive
and other contaminants.
May be used on energized equipment.
TYPICAL APPLICATIONS
Electro-Wash ®NXO Cleaner/Degreaser cleans and
degreases:
Plugs and Sockets
Potentiometers
Circuit Breakers
Solenoids
Switching Devices
Relays & Contacts
Selector Switches
Motors and Generators
COMPATIBILITY
Electro-Wash® NXO cleaner degreaser is
generally compatible with most materials used in
printed circuit board fabrication, except acrylics,
ABS Resins, Polycarbonates, Polystyrenes, and
other resins. With any cleaning agent
compatibility must be determined on a noncritical area prior to use.
TYPICAL PRODUCT DATA AND PHYSICAL
PROPERTIES
Material
Compatibility
Buna-N
Not Recommended
Graphite
Good
HDPE
Good
Kynar
Poor
LDPE
Good
Lexan
Not Recommended
Neoprene
Poor
Noryl
Poor
Cross-Linked PE
Good
Polyacrylate
Not Recommended
Polystyrene
Not Recommended
PVC
Poor
Silicone Rubber
Not Recommended
Teflon
Good
Viton
Poor
ENVIRONMENTAL IMPACT DATA
Aerosol Only
CFC
0.0%
VOC
42.0%
HCFC
0.0%
HFC
25.0%
CL Solv.
0.0%
ODP
0.00
DISTRIBUTED BY:
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean.
Wash parts from top to bottom, allowing the
liquid to flush away dirt and dissolved
grease. For optimum performance and pin
point control, Electro-Wash® NXO Cleaner
/Degreaser should be used with the attached
extension tube.
ENVIRONMENTAL IMPACT DATA
AVAILABILITY
ES1607 12 oz. Aerosol
ES107 1 Gallon Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. F (08/14)
Loading...