Chemtronics ES1530 User Manual

Flux-Off® Water Soluble

Flux-Off® Water Soluble

Flux-Off® Water Soluble

0308

ES1530, ES1530CB, ES1530C, ES1530CBC

Chemtronics
8125 Cobb Center Drive
Kennesaw, GA 30152

Tel. [phone] or toll free 800-645-5244

Chemtrec - 1-800-424-9300 or collect 703-527-3887
24/7

Chemtronics
8125 Cobb Center Drive
Kennesaw, GA 30152

Tel. [phone] or toll free 800-645-5244

6/6/2014.

Material Safety Data Sheet

Product name

Supplier

Synonym

Trade name

Manufacturer

Code

MSDS #

Validation date

Print date

In case of emergency

1. Product and company identification

Flux-Off® Water Soluble

:

:

:

:

:
:::

:

:

Product type

:

Aerosol.

6/6/2014.

Signal word

2. Hazards identification

Potential acute health effects

Harmful by inhalation. At very high concentrations, can displace the normal air and
cause suffocation from lack of oxygen.

Severely irritating to eyes. Risk of serious damage to eyes.

Harmful if swallowed. Irritating to mouth, throat and stomach.

Slightly irritating to the skin.

Eyes

Skin

Inhalation
Ingestion

Physical state

Liquid. [Aerosol.]

DANGER!

FLAMMABLE AEROSOL. CAUSES EYE IRRITATION. MAY CAUSE SKIN
IRRITATION. CONTAINS MATERIAL THAT MAY CAUSE TARGET ORGAN DAMAGE,
BASED ON ANIMAL DATA.

:

:

:

:::

Odor

:

Alcohol-like.

OSHA/HCS status

:

This material is considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200).

Potential chronic health effects

Carcinogenicity

:

No known significant effects or critical hazards.

Mutagenicity

:

No known significant effects or critical hazards.

Chronic effects

:

Contains material that may cause target organ damage, based on animal data.

Color

:

Colorless.

Emergency overview

Hazard statements

:

Precautionary measures

:

Do not breathe vapor or mist. Do not eat, drink or smoke when using this product.
Avoid contact with eyes, skin and clothing. Keep away from heat, sparks, open flames
and hot surfaces. - No smoking. Do not spray on an open flame or other ignition source.
Pressurized container: Do not pierce or burn, even after use. Protect from sunlight. Do
not expose to temperatures exceeding 50 °C/122 °F. Wash thoroughly after handling.

1/11

0308

6/6/2014.

Flux-Off® Water Soluble

2. Hazards identification

See toxicological information (Section 11)

Medical conditions
aggravated by over­exposure

Pre-existing disorders involving any target organs mentioned in this MSDS as being at
risk may be aggravated by over-exposure to this product.

:

Teratogenicity

:

No known significant effects or critical hazards.

Developmental effects

:

No known significant effects or critical hazards.

Fertility effects

:

No known significant effects or critical hazards.

Over-exposure signs/symptoms

Ingestion

:

Adverse symptoms may include the following:
Irritating to mouth, throat and stomach.
nausea or vomiting

Skin

:

Adverse symptoms may include the following:
irritation
redness

Eyes

:

Adverse symptoms may include the following:
pain or irritation
watering
redness

Inhalation

:

Adverse symptoms may include the following:
respiratory tract irritation
coughing
dizziness/vertigo
drowsiness/fatigue
headache
unconsciousness

Target organs

:

Contains material which may cause damage to the following organs: blood, kidneys,
lungs, liver, spleen, cardiovascular system, upper respiratory tract, skin, central nervous
system (CNS), eye, lens or cornea.
Isopropyl alcohol

67-63-0

50 - 75

1,1-difluoroethane

75-37-6

10 - 25

Carbon dioxide

124-38-9

1 - 5

propyl acetate

109-60-4

1 - 3

3. Composition/information on ingredients

Name

CAS number

%

There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.

Check for and remove any contact lenses. Immediately flush eyes with plenty of water
for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical
attention immediately.

In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Wash clothing before reuse. Clean
shoes thoroughly before reuse. Get medical attention immediately.

Move exposed person to fresh air. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention
immediately.

4. First aid measures

Eye contact

Skin contact

Inhalation

:

:

:

2/11

0308

6/6/2014.

Flux-Off® Water Soluble

4. First aid measures

Wash out mouth with water. Do not induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious person. Get medical
attention immediately.

Ingestion

No specific treatment. Treat symptomatically. Contact poison treatment specialist
immediately if large quantities have been ingested or inhaled.

Notes to physician

:
:

Protection of first-aiders

:

No action shall be taken involving any personal risk or without suitable training. It may
be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

Use an extinguishing agent suitable for the surrounding fire.

5. Fire-fighting measures

Extinguishing media

Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.

Flammable aerosol. In a fire or if heated, a pressure increase will occur and the
container may burst, with the risk of a subsequent explosion. Gas may accumulate in
low or confined areas or travel a considerable distance to a source of ignition and flash
back, causing fire or explosion. Bursting aerosol containers may be propelled from a
fire at high speed. Runoff to sewer may create fire or explosion hazard.

Special protective
equipment for fire-fighters

Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.

:

Special exposure hazards

:

None known.

Suitable

:

Not suitable

:

Hazardous thermal
decomposition products

:

Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
halogenated compounds
carbonyl halides

Flammability of the product

:

No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. In the case of aerosols being ruptured, care should be taken due to the rapid
escape of the pressurized contents and propellant. If a large number of containers are
ruptured, treat as a bulk material spillage according to the instructions in the clean-up
section. Do not touch or walk through spilled material. Shut off all ignition sources. No
flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put
on appropriate personal protective equipment (see Section 8).

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Approach release from upwind. Prevent entry into sewers,
water courses, basements or confined areas. Wash spillages into an effluent treatment
plant or proceed as follows. Contain and collect spillage with non-combustible,
absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in
container for disposal according to local regulations (see Section 13). Dispose of via a
licensed waste disposal contractor. Contaminated absorbent material may pose the

Environmental precautions

6. Accidental release measures

:

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).

Personal precautions

:

Large spill

:

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively,
or if water-insoluble, absorb with an inert dry material and place in an appropriate waste
disposal container. Dispose of via a licensed waste disposal contractor.

Small spill

:

Methods for cleaning up

3/11

0308

6/6/2014.

Flux-Off® Water Soluble

6. Accidental release measures

same hazard as the spilled product. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal.

Store in accordance with local regulations. Store in a segregated and approved area.
Store away from direct sunlight in a dry, cool and well-ventilated area, away from
incompatible materials (see Section 10) and food and drink. Eliminate all ignition
sources. Use appropriate containment to avoid environmental contamination.

Put on appropriate personal protective equipment (see Section 8). Eating, drinking and
smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and smoking.
Remove contaminated clothing and protective equipment before entering eating areas.
Pressurized container: protect from sunlight and do not expose to temperatures
exceeding 50°C. Do not pierce or burn, even after use. Do not ingest. Avoid contact
with eyes, skin and clothing. Avoid breathing gas. Avoid breathing vapor or mist. Use
only with adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Store and use away from heat, sparks, open flame or any other ignition
source. Use explosion-proof electrical (ventilating, lighting and material handling)
equipment. Use non-sparking tools. Empty containers retain product residue and can
be hazardous.

7. Handling and storage

Handling

Storage

:

:

Isopropyl alcohol

ACGIH TLV (United States, 6/2013).

STEL: 400 ppm 15 minutes.
TWA: 200 ppm 8 hours.

NIOSH REL (United States, 4/2013).

STEL: 1225 mg/m³ 15 minutes.
STEL: 500 ppm 15 minutes.
TWA: 980 mg/m³ 10 hours.
TWA: 400 ppm 10 hours.

OSHA PEL (United States, 2/2013).

TWA: 980 mg/m³ 8 hours.
TWA: 400 ppm 8 hours.

OSHA PEL 1989 (United States, 3/1989).

STEL: 1225 mg/m³ 15 minutes.
STEL: 500 ppm 15 minutes.
TWA: 980 mg/m³ 8 hours.
TWA: 400 ppm 8 hours.

1,1-difluoroethane

AIHA WEEL (United States, 10/2011).

TWA: 1000 ppm 8 hours.

Carbon dioxide

ACGIH TLV (United States, 6/2013). Oxygen Depletion
[Asphyxiant].

STEL: 54000 mg/m³ 15 minutes.
STEL: 30000 ppm 15 minutes.
TWA: 9000 mg/m³ 8 hours.
TWA: 5000 ppm 8 hours.

NIOSH REL (United States, 4/2013).

STEL: 54000 mg/m³ 15 minutes.
STEL: 30000 ppm 15 minutes.
TWA: 9000 mg/m³ 10 hours.
TWA: 5000 ppm 10 hours.

OSHA PEL (United States, 2/2013).

TWA: 9000 mg/m³ 8 hours.
TWA: 5000 ppm 8 hours.

OSHA PEL 1989 (United States, 3/1989).

8. Exposure controls/personal protection

Ingredient

Exposure limits

4/11

0308

6/6/2014.