Chemtronics ES1520E User Manual
@ 77°F
@ 77°F F/1 atm
Liquified Gas
5 years
CHEMTRONICS
Technical Data Sheet
TDS # 1520 E
PRODUCT DESCRIPTION
Ultrajet compressed gas duster is a high
pressure duster that cleans electronics
without scratching delicate surfaces. This
duster/ cleaner is nonflammable, residue-free
and won’t scratch delicate surfaces.
Nonflammable
Leaves no residue
High pressure for contamination control
Nonabrasive
Excellent mate rial compatibility
Penetrates hard to reach areas
Contains no ozone depleting com pounds
TYPICAL APPLICATIONS
Ultrajet
of electronic equipm ent maintenance and is
particularly suited for applications involving:
Audio/Video Equipm ent
Computers and Othe r Electronic
Fax Machines
Laboratory Instr uments
Photo Equipment
Printed Circuit Boards
Printers
Surface Mount Device s
duster is engineered for all aspects
Equipment
Ultrajet
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.7°F
Vapor Density (air=1)
Solubility in Water
Specific Gravity
(water = 1 @77°F)
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless
Odor
Surface Tension
(dynes/cm @77°F)
Flash Point (TCC)
Shelf life
COMPATIBILITY
Ultrajet
materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster/cleaner,
compatibility must be determined on a noncritical area prior to use.
3.18
0.10% by weight
1.21
Slight Ethereal
7.8
None
is generally compatible with most
Material
Compatibility
Buna-N
Excellent
Graphite
Excellent
HDPE
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Cross-Linked PE
Excellent
Polyacrylate
Excellent
Polystyrene
Excellent
PVC
Excellent
Silicone Rubber
Excellent
Teflon
Excellent
Viton
Excellent
PERFORMANCE
Pressure PSI G / Temperature F
200 - P 150 S - I 100 G - 50 - 0
20
40
60
80
100
120
140
Temperature F
CFC
0.0%
VOC
0.0%
HCFC
0.0%
HFC
100.0%
CL Solv.
0.0%
ODP
0.00
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401
.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS care fully prior to use.
No special surface pre paration is required
prior to using Ultrajet
. Direct high pressure
spray onto the area to be cleaned to remove
dust, dirt and other contaminant. For
optimum performance and pin point c ontrol,
use with the attached extension tube.
AVAILABILITY
ES1520E 400 ml Aerosol Europe
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990. T he
ODP of this product is 0.0. It is the sum of the ODP of
the substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate
and use the data properly. CHEMTRONICS does not
guarantee the accuracy of the data and assumes no
liability in connecti on with damages incurred while using
it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. E (08/13)
DISTRIBUTED BY:
Loading...