Page 1
Specific Gravity
0.70
Evaporation Rate >1
(butyl acetate=1)
Surface Tension
17.3
TDS 810E
CHEMTRONICS
Technical Data Sheet
Electro-Wash PX
Cleaner Degreaser
PRODUCT DESCRIPTION
Electro-Wash PX is a one-step universal
cleaning and degreasing agent. Engineered
for removing contamination from fiber optic
connectors, modules, and cables, this
material is safe for most plastics.
Formulated with very low surface tension,
this high pressure aerosol formulation
flushes areas clean and evaporates instantly
leaving no residue.
Removes encrusted dirt, grease and other
contaminants
Penetrates hard to reach areas
Evaporates quickly
Leaves no residues
Has low odor
Is non-corrosive
Contains no CFCs or HCFCs
Contains no 1,1,1 Trichloroetha ne
TYPICAL APPLICATIONS
Electro-Wash
Buffer Gel from Cable
Contaminants from Transmitters,
Amplifiers and Transceiver s
Soils from Optical Interfaces,
Electronic Interfaces, and Drive
Circuitry
Airborne Dirt from Printed Circuit
Boards
Insulating Residue from Selector
Switches and Relays
PX cleans:
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
Vapor Density (air=1)
Solubility in Water
(water = 1@77°F)
Appearance Clear, Colorless L iquid
Odor
(dynes/cm @21.6°C)
Flash Point (TCC)
Kauri-Butanol
(KB) Number
COMPATIBILITY
Electro-Wash
with most materials used in the fiber optics
industry. With any cleaning agent
compatibility must be determined on a noncritical area prior to use.
PX is generally compatible
141°F Initial
>1
20%
Mild
-20°F
50
Page 2
Material
Compatibility
ABS
Good
Buna-N
Good
EPDM
Poor
Graphite
Excellent
HDPE
Excellent
Kynar
Fair
LDPE
Fair
Lexan
Fair
Neoprene
Fair
Noryl
Good
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Good
Polystyrene
Non-Compatible
PVC
Good
Silicone Rubber
Non-Compatible
Teflon
Excellent
Viton
Excellent
Product Required for Oil Removal (mg solvent / 1
mg oil)
33
Conventional CFC
11
Conventional CFC
CFC
0.0%
VOC
100%
HCFC
0.0%
HFC
0.0%
CL Solv.
0.0%
nPB
0.0
to evaluate and use the data properly.
AVAILABILITY
ES810E 200 ml Aerosol
ES1010E 400 ml Aerosol
ES110E 1 Gal. Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
Performance
Electro-Wash PX
94
Cleaner
Water Soluble Oil Removal Rate (mg / in∧2 sec.)
Electro-Wash PX
Cleaner
5
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Sp ray 4 -6 inches from surface to clean. Wash parts
from top to bottom, allowing the liquid to flush away
dirt and dissolved grease. For precise application
use attached extension tube. Do not use on
energized equipment.
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
CHEMTRONICS does no t guarantee t he accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. B (08/13)
DISTRIBUTED BY:
Loading...