Chemtronics CW8200 User Manual
Rosin Flux D ispensing P en
Flux Type Rosin, Grade WW
ANSI/IPC J-STD-004, Type ROL0
Flash Point (TCC) 54 °F (12 °C)
Vapor Density (air=1) > 1
Appearance Yellow Liquid
Odor Alcohol
No Clean Flux Dispensing Pen
Flux Type Rosin, Grade WW
ANSI/IPC J-STD-004, Type ROL0
Flash Point (TCC) 54 °F (12 °C)
Vapor Density (air=1) > 1
Appearance Slightly Yellow Liquid
Odor Alcohol
Shelf life 5 years
RoHS Compliant
CHEMTRONICS
TDS # CW8000
Technical Data Sheet
CircuitWorks
PRODUCT DESCRIPTION
CircuitWorks Flux Dispensing Pens are designed
specifically to apply each type of flux with precision
control. The Rosin Flux Dispensing Pen quickly
applies a noncorrosive type R flux. This flux meets
MIL-F-14256 E and F. The No Clean Flux
Dispensing Pen precisely applies a patented
noncorrosive, halide free, organic low solid no clean
flux. This flux meets Bellcore TR-NWT-000078 and
IPC SF-818 for surface insulation resistance.
Marker pen dispenser provides controlled
and exact application
Minimize excess flux waste
Completely portable package
All fluxes are noncorrosive and halide free
Excellent material compatibility
Fast drying
TYPICAL APPLICATIONS
CircuitWorks Flux Dispensing Pens precisely
dispense flux on:
Printed Circuit Boards
Chip Carriers
Heat Sinks
Surface Mount Device Pads
Switches
Sockets
Flux Dispensing Pens
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
COMPATIBILITY
CircuitWorks Flux Dispensing Pens are generally
compatible with most materials used in the electronics
industry. As with any cleaning agent, material
compatibility should be determined on a non-critical
area prior to use.
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Hold pen vertically and briefly depress tip to start
liquid flow. Rub pen tip on surface to be fluxed.
Wipe tip on a ControlWipe dry wipe to remove
buildup. Flux can be removed with Flux-Off® Rosin,
or No Clean Plus.
CAUTION: Product is Flammable - Do not use near
sources of ignition and energized equipment.
AVAILABILITY
CW8100 9 gm (0.32 oz) No Clean Flux Pen
CW8200 9 gm (0.32 oz) Rosin Flux Pen
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions. The
toll free number is: 1-800-TECH-401.
NOTE: This information is believed to be accurate.
It is intended for professional end users having the
skills to evaluate and use the data properly.
CHEMTRONICS does n ot guarantee the accura cy of
the data and assumes no liability in connection with
damages incurred while using it.
Chemtronics, Flux-Off and CircuitWorks are registered
trademarks of Chemtronics. All rights reserved.
ControlWipes is a trademark of Chemtronics. All rig hts
reserved.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
DISTRIBUTED BY:
REV. D (08/13)
Loading...