Solubility in Water
Soluble
(Ether = 1)
CC)
F
any chemical product, component
CHEMTRONICS
Technical Data Sheet
TDS # CSP20
Screen Prep
Presaturated Wipe
PRODUCT DESCRIPTION
Screen Prep Presaturated Wipes are a
convenient cleaning and static control system
for use on monitor screens. This two part
system is excellent for use on computer
display screens, scope and dial faces, and
glass and plastic surfaces of instruments.
These highly effective cleaning wipes are
safe on plastics and are ideal for cleaning
sensitive surfaces. Screen Prep provides a
static–dissipative treatment to the surface to
control static–generated contamination.
Screen Prep removes dust, fingerprint oils
and other vision-inhibiting contaminants, and
leaves no residue.
Screen Prep Presaturated Wipes contain
isopropyl alcohol and an anti-static agent.
Plastic Safe
Leaves No Residue
Nonabrasive
Static-dissipative
Upper Ozone Safe; CFC/HCFC Free
TYPICAL APPLICATIONS
Screen Prep cleans:
Computer monitors
Display screens
Scope and dial faces
Instrument readouts
Equipment glass & plastic surfaces
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Specific Gravity
Evaporation Rate <1
Appearance Clear, Colorless L iquid
Flash Point (T
Percent Volatile
Shelf life
COMPATIBILITY
Screen Prep Presaturated Wipes are
generally compatible with most plastics,
glass and metals. Compatibility must be
checked with all antiglare coatings. As with
compatibility must be determined on a noncritical area prior to use.
0.78
165o
100%
2 years
Material
Compatibility
Aluminum
Excellent
Buna-N
Excellent
CPVC
Excellent
Epoxy
Excellent
Neoprene
Excellent
Noryl
Excellent
Phenolic
Excellent
Cross-Linked PE
Excellent
Polycarbonate
Excellent
Polypropylene
Excellent
Polystyrene
Excellent
PVC
Excellent
Teflon
Excellent
Tygon
Excellent
Viton
Excellent
CFC
0.0%
VOC
25
HCFC
0.0%
HFC
0.0%
CL Solv.
0.0%
ODP
0.0
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
Screen PrepTM Presaturated Wipes:
Remove premoistened pad from packet #1
and lightly wipe away any dust or
contaminants from surfaces. Remove dry
wipe from pac ket #2 and wipe surface dry.
AVAILABILITY
CSP20 25 twin packs:
Packet #1 contains 3” x 4” premoistened pad
Packet #2 contains 4” x 6” dry wipe
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. Call toll free at: 1-800-TECH-
DISTRIBUTED BY:
401 (1-800-832-4401).
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is zero.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accu racy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
Chemtronics is a registered trademark of Chemtronics. All
rights reserved. Screen Prep is a trademark of Chemtronics.
All rights reserved.
REV. A (08/13)
Loading...