Solubility in Water
Soluble
(Ether = 1)
Flash Point (TCC)
any chemical product, component
CHEMTRONICS
Technical Data Sheet
TDS # CS25
Chemswab
Presaturated Swab
PRODUCT DESCRIPTION
Chemswab Presaturated Swabs are general
purpose, lint-free cleaning swabs. They are
excellent for general purpose cleaning of
computers, office and laboratory equipment.
These highly effective cleaning swabs are
ideal for cleaning sensitive surfaces,
electronics components, touch keypads,
keyboards, and instrument housings.
Chemswab quickly and safely removes
handling soils, dirt and oxides from PCB’s,
mechanical / electrical assemblies and other
electronic equipment. Chemswab is
especially effective in removing ink and
permanent marker.
Chemswab Presaturated Swabs contain
ultra-pure isopropyl alcohol (91% IPA / 9%
Pure Water) on a urethane foam swab.
Plastic Safe
Dries Fast
Leaves No Residue
Nonabrasive
Upper Ozone Safe; CFC/HCFC Free
TYPICAL APPLICATIONS
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Specific Gravity
Evaporation Rate <1
Appearance Clear, Colorless L iquid
Percent Volatile
Shelf life
COMPATIBILITY
Chemswab Presaturated Swabs are
generally compatible with most plastics,
glass and metals. Compatibility must be
checked with all antiglare coatings. As with
compatibility must be determined on a noncritical area prior to use.
0.81
61o F
100%
2 years
Chemswab cleans and degreases:
Keyboards and T ouch pads
Cables
Cabinets and Housings
Material
Compatibility
Aluminum
Excellent
Buna-N
Good
CPVC
Excellent
Epoxy
Excellent
Neoprene
Good
Noryl
Excellent
Phenolic
Excellent
Cross-Linked PE
Good
Polycarbonate
Poor
Polypropylene
Good
Polystyrene
Poor
PVC
Fair
Teflon
Excellent
Tygon
Good
Viton
Excellent
CFC
0.0%
VOC
91%
HCFC
0.0%
HFC
0.0%
CL Solv.
0.0%
ODP
0.0
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
ChemswabTM Presaturated S wabs:
Remove wipe from packet and lightly wipe
away any dust or contaminants from surfaces.
Allow surface to dry completely before use.
AVAILABILITY
CS25 25 Premoistened Swabs
individually packaged
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. Call toll free at: 1-800-TECH-
401 (1-800-832-4401).
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is zero.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
Chemtronics is a registered trademark of Chemtronics. All
rights reserved. Chemswab is a trademark of Chemtronics.
All rights reserved.
REV. A (08/13)
DISTRIBUTED BY:
Loading...