Chemtronics CP400 User Manual
Solubility in Water
Soluble
(Ether = 1)
Flash Point (TCC)
CHEMTRONICS
Technical Data Sheet
TDS # CP400
Presaturated Wipe
Chempad
PRODUCT DESCRIPTION
Chempad Presaturated Wipes are general
purpose, lint-free cleaning wipes. They are
excellent for general purpose cleaning of
computers, office and laboratory equipment.
These highly effective cleaning wipes are
ideal for cleaning sensitive surfaces, fiber
optic connectors, electronics components,
touch keypads, keyboards, instrument
housings, and magnetic tape heads.
Chempad quickly and safely removes
handling soils, dirt and oxides from PCB’s,
mechanical / electrical assemblies and other
electronic equipment. Chempad is
especially effective in removing ink and
permanent marker.
Chempad Presaturated Wipes contain ultra-
pure isopropyl alcohol (91% IPA / 9% Pure
Water) on an ultra-soft, lint free synthetic
felt.
Plastic Safe
Dries Fast
Leaves No Residue
Nonabrasive
Upper Ozone Safe; CFC/HCFC Free
TYPICAL APPLICATIONS
Chempad cleans and degreases:
Keyboards and T ouch pads
Cables
Fiber Optic Connectors
Cabinets and Housings
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Specific Gravity
Evaporation Rate <1
Appearance Clear, Colorless Liquid
Percent Volatile
Shelf life
COMPATIBILITY
Chempad Presaturated Wipes are generally
compatible with most plastics, glass and
metals. Compatibility must be checked with
all antiglare coatings. As with any chemical
product, component compatibility must be
determined on a non-cr itical area prior to use.
0.81
61o F
100%
2 years
Material
Compatibility
Aluminum
Excellent
Buna-N
Good
CPVC
Excellent
Epoxy
Excellent
Neoprene
Good
Noryl
Excellent
Phenolic
Excellent
Cross-Linked PE
Good
Polycarbonate
Poor
Polypropylene
Good
Polystyrene
Poor
PVC
Fair
Teflon
Excellent
Tygon
Good
Viton
Excellent
CFC
0.0%
VOC
91%
HCFC
0.0%
HFC
0.0%
CL Solv.
0.0%
ODP
0.0
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
ChempadTM Presaturated Wipes:
Remove wipe from packet and lightly wipe
away any dust or contaminants from surfaces.
Allow surface to dry completely before use.
AVAILABILITY
CP400 50 Premoistened Wipes
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics
provides a technical hotline to
answer your technical and application related
questions. Call toll free at: 1-800-TECH-
401 (1-800-832-4401).
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of
this product is zero.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarant ee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
Chemtronics is a registered trademark of Chemtronics. All
rights reserved. Chempad is a trademark of Chemtronics. All
rights reserve d.
REV. A (05/04)
DISTRIBUTED BY:
Loading...