Chemtronics CC505F User Manual
CHEMTRONICS
TDS CC505F
Technical Data Sheet
MTP Connector Cleaning Swabs
PRODUCT DESCRIPTION
Chemtronics MTP Connector Cleaning
Swabs are the cleaning tool specifically
for cleaning MTP connections. They
feature an exclusive chamois material
engineered to quickly and safely clean
MTP connectors, without leaving
residue. The material has super
absorption which pulls soils and solvents
from end faces even in deeply recessed
MTP connections where wiping is
difficult.
COMPATIBILITY
Chemtronics MTP Connector Cleaning
Swabs are compatible with most
common solvents such as isopropyl
alcohol and methanol. Not
recommended for use with ketones such
as acetone or methyl ethyl ketone.
CHEMTRONICS
8125 Cobb Center Drive
Kennesaw, GA 30152 USA
1-770-424-4888 REV. (05/14)
Ideal size and dimension for MTP
connector cleaning
Seamless blunt design makes precise
contact with MTP end face
High absorbency swab quickly and
safely removes contaminants
Free of adhesives or binders; will not
leave residue
Can be used with Electro-Wash® PX
Fiber Optic Cleaner for hard-toremove soils
Available in durable, field-ready,
transparent tubes
Patented —U.S. Patent #7,526,830
and foreign patents
TYPICAL APPLICATIONS
Chemtronics® MTP Connector Cleaning
Swabs can be used to:
Clean all MTP connectors
Easily remove soil between and from
alignment pins
CC505F
AVAILABILITY
Product
Number
Swabs
per
Tube
Swab
Length
Head
Material
Head
Width/Length
Handle
Material
Handle
Thickness
CC505F
25
3.25"(8.
25 cm)
Synthetic
Chamois
0.09" x 0.88"
(2.3 mm x 22.3
mm)
ABS
0.09" x 0.060"
(2.3 mm x 1.6
mm )
CC5056F
25
6" (15.4
cm)
Synthetic
Chamois
0.09" x 0.88"
(2.3 mm x 22.3
mm)
ABS
0.09" x 0.060"
(2.3 mm x 1.6
mm )
DISTRIBUTED BY:
DIRECTIONS FOR USE
1. Lightly “spot” a QbE
the platen with Electro-Wash PX
Fiber Optic Cleaner, or with the
Fiberwash™ or MX pen.
2. Lightly touch the end of the MTO
Connector Swab to the wetted area to
absorb some cleaning solution.
Wipe connector areas to be cleaned.
3. Use another MTP Connector
Cleaning Swab to dry cleaned area,
only if required.
4. Check your work with a fiber scope
or measuring device.
®
-2 wipe on
NOTE: This information is believed to be
accurate. It is intended for professional
end users having the skills to evaluate and
use the data properly. Chemtronics does
not guarantee the accuracy of the data
and assumes no liability in connection
with damages incurred while using it.
TECHNICAL AND
APPLICATION ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application
related questions. The toll free number is: 1-
800-TECH-401.
Chemtronics, and QbE® is a registered
trademark of Chemtronics. All rights
reserved. Fiberwash™ is a trademark of
Chemtronics. All rights reserved.
© 2014 Chemtronics. All rights reserved.
Loading...