Chemtronics 6209HC User Manual

Download

Page 1

COVENTRY



TDS # 620xHC

Clean Room Products

Poly-Wipes (Standard Weight, Sealed Edge)

PRODUCT DESCRIPTION

Poly-Wipes are constructed from monofilament

polyester no-run knit, providing excellent strength, good absorbency and chemical compatibility. These wipers are a perfect choice for general cleanroom and equipment maintenance, or any critical applications were lint can be detrimental. For lowest particle counts speci fy 6209HC with sealed edges.

 Excellent solvent and acid resistance  Monofilament "no-run" construction does not

generate loose fibers  Excellent durability for cleaning rough, abrasive, or irregular surfaces  Low ionic, nonvolatile residue and particle contamination

 Good absorbency  Available in heavy or light weight styles  Available stacked or bulk packed  Processed and packaged in a Class 10

cleanroom.

TYPICAL APPLICATIONS

Poly-Wipes can be used to clean:

 Semiconductor Wafer Fabs  Aerospace Production Areas  Disk Drives Production Areas  Pharmaceutical / Biotechnical Production Areas  General Cleanroom Cleaning  Clean and polish critical surfaces both metal and

non-metal

COMPATIBILITY

Poly-Wipes are compatible with most common

solvents such as isopropyl alcohol, methanol and ketones such as acetone or methyl ethyl ketone. These wipes are generally compatible with dilute or weak bases, as well as with most dilute or weak acids.

AVAILABILITY

6200HC Series Poly-Wipes (Standard

Weight)

6209HC

wipe, 115 to 125g/m2, 150/Bag

9" x 9" (22.9cm x 22.9cm) Polyester

6204HC

Polyester wipe,115 to 125g/m2, 600/Bag

9" x 9" (22.9cm x 22.9cm) Sealed Edge

6206HC

wipe, 115 to 125g/m2, 300/Bag

COVENTRY™ Clean Room Products Division of Chemtronics 8125 Cobb Center Drive Kennesaw, GA 30152 USA 1-770-424-4888 REV. A (08/13)

9" x 9" (22.9cm x 22.9cm) Polyester

Division of Chemtronics

TECHNICAL HOT LINE 1-800-TECH-401

Page 2

Poly-Wipes Test Data

Wipe Material

Polyester Knit Fabric (70 denier)

Wipe

6204HC

6206HC

6209HC

Availability

Basis Weight

120 g/m2

(+/- 5 g/m2)

120 g/m

(+/- 5 g/m2)

120 g/m

(+/- 5 g/m2)

Particle Counts (LPC) >/= 0.5 microns

FTIR : silicone, amide, phthalates

None Detected

Chloride Ions

0.00005 mg/g

Flouride Ions

None Detected

Nitrite Ions

0.00007 mg/g

Nitrate Ions

0.00007 mg/g

Phosphate Ions

None Detected

Sulphate Ions

0.00008 mg/g

Sodium Ions

0.00002 mg/g

Calcium Ions

0.00015 mg/g

Absorbency

306 ml/m2

DISTRIBUTED BY:

4”x4” 6”x6” 9" x 9"

3.25x10e6 particles/m2 3.25x10e6 particles/m2

0.00002 g/g

0.00003 g/g

0.00001 g/g

0.00002 g/g

NVR in DI water

NVR in IPA

3.25x10e6 particles/m

0.00002 g/g

0.00005 g/g

The wipe tests were done using the recommended practices of the Institute of Environmental Science, Swabs and Wipes Working Group.These are test results, not specifications.

TECHNICAL AND APPLICATION ASSISTANCE

Coventry Clean Room Products provides A technical hotline to answer your technical And application related questions.

The toll free number is: 1-800-TECH-401

TECHNICAL HOT LINE 1-800-TECH-401