Boiling Point
95°F
Specific Gravity
(water = 1@ 77°F)
1.24
Flash Point (TCC)
None
Evaporation Rate
(Butyl acetate=1)
>1
Kauri-Butanol
(KB) Number
32
Appearance Clear, colorless liquid
Odor
Ethereal Odor
Surface Tension
(dynes/cm @ 25°C)
14.0
Solubility in Water
Negligible
VOC* Content (aerosol):
Federal 2 5 %
RoHS Compliant
5 years
CHEMTRONICS
Technical Data Sheet
Flux-Off VZ
Flux Remover
TDS # 6200
PRODUCT DESCRIPTION
Flux-Off
VZ F lux Rem over is a highly
effective cleaner for removing rosin-based fluxes
from electronic com ponents and assemblies.
The non -ozone depleting Veriz ane
system utilizes Vertrel
Dupont
to quickly rem oves f lux without
harming sensitive materials.
Quickly removes all rosin-based flux residues
Excellent material compatibility
Evaporates quickly
Leaves no residues
Has low odor
Penetrates tight tolerance areas
Also removes oil, grease, and ionic residues
Contains no CFCs, HCFCs or
1,1,1 Trichloroethane
TYPICAL APPLICATIONS
Flux-Off
VZ Flux Remover elim inates f lux
residues and cleans:
Through-hole Circuit Boards
Surface Mount Pads
Chip Carriers
Ball Grid Arrays
Switches
SMT Components
Metal or Plastic Housings
solvent
Specialty Fluid from
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
CARB 50 %
SCAQMD 444 g/L
Shelflife
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
COMPATIBILITY
Flux-Off VZ Flux Remover is generally compatible
with most materials used in the electronics industry.
With any cl eaning a gent c ompatibility
solvent/component m ust be de termined on a noncritical area prior to use.
Material
Compatibility
ABS
Good
Buna-N
Good
EPDM
Good
Graphite
Good
HDPE
Good
Kynar
Good
LDPE
Good
Lexan
Poor
Neoprene
Good
Noryl
Good
Nylon 66
Good
Cross-Linked PE
Good
Polypropylene
Good
Polystyrene
Poor
PVC
Good
Silicone Rubber
Good
Teflon
Good
Viton
Good
COMPETITIVE ASSESSMENT
Milligrams of Flux Removed
Per Gram of Solvent
6.6
5
0
1
2
3
4
5
6
7
Flux-Off VZ Competitor's HFC-based
product
ENVIRONMENTAL IMPACT DATA
HCFC-141b
HCFC-225
None
None
HFC
nPB
Yes
None
Hydrochlorofluorocarbons (HCFCs) are regulated under the Montreal Protocol
as Class II ozone depleting substances. HCFC-141b is no longer produced in
the US under this legislation. HCFC-225 is planned for production phase-out
in 2015. Hydrofluorocarbons (HFCs) are not currently regulated.
EPA h as listed n-propyl b romide (nPB) as an acceptable alternative to ozone
depleting s ubstances in m etal, p recision, an d e lectronics cl eaning under
Section 612 of the Clean Air Act.
NOTE:
This i nformation i s be lieved t o be a ccurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is: 1-800-
TECH-401.
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean. W ash parts
from top to bottom, allowing the liquid to flush away
flux r esidues, di rt a nd di ssolved oi l. F or pr ecision
application use attached extension tube.
AVAILABILITY
ES6200 12 oz. Aerosol
ES6201 1 Gallon
ES6255 53 Gallon
Flux-Off and Chemtronics are registered trademarks of
Chemtronics. All rights reserved. Verizane, is a trademark
of Chemtronics. All rights reserved.
Vertrel® a nd D uPont
trademarks of E. I. duPont de Nemours and Company.
are t rademarks o r r egistered
DISTRIBUTED BY:
Loading...