Chemtronics 26122F User Manual



COVENTRY

TDS # 25123

Clean Room Products

Division of Chemtronics

1.25 mm Fiber Optic Sleeve Cleaning Swab
– Polyester Fiber Tip

PRODUCT DESCRIPTION
The 1.25 mm Fiber Optic Sleeve
Cleaning Swab (patent pending) is
ideally suited for cleaning contamination
from 1.25 mm fiber optic sleeves and
polishing pucks. The 1.25 mm diameter
polyester tip fits tightly and conforms to
the inside of all 1.25 mm mating sleeves,
adapters and slurry polishing fixtures.
Critical surfaces are cleaned of all
contamination. This swab may be used
wet or dry to remove dirt and oil
contamination. Solvent cleaners such as
Electro-Wash PX or Electro-Wash
CZ cleaner degreasers are 100%
compatible with this swab. No
adhesives are used in our proprietary
manufacturing process, thereby
minimizing leachable contaminants.
The swab head contains no seams or
hard surface that could scratch critical
surfaces. Patent Pending.

This product is not designed or intended
for cleaning the optical surface of
connectors.

TYPICAL APPLICATIONS

Cleaning of fiber optic sleeves 1.25 mm
in size.
Removal of slurry from 1.25 mm ferrule
polishing fixtures.

COMPATIBILITY

Coventry’s Fiber Optic Sleeve Cleaning
Swab is compatible with Electro-Wash
PX and Electro-Wash CZ cleaner
degreasers, isopropyl alcohol and
acetone.

AVAILABILITY

25123X 1.25 mm head diameter,

17 mm head length
Polypropylene handle
Overall swab length 6
inches
100 / bag, 5 bags per box.

RoHS/WEEE
Status

COVENTRY™ Clean Room Products
Division of Chemtronics
KENNESAW, GA 30152
REV. E (08/13)

Electro-Wash a nd Chemtro ni cs are registered
trademarks of Chemtronics. All rights reserved.
Coventry, is a trademark of Chemtronics. All
rights reserve d.

TECHNICAL HOT LINE 1-800-TECH-401