Chemtronics 1607 Data Sheet
1.32
>1
14.9
Dielectric Breakdown 15 kV
Shelflife Aerosols 5 years
Liquids 2 years after opening
VOC* Content: Aerosol Liquid
g/L
Federal 38% 50%
CHEMTRONICS
Technical Data Sheet
Electro-Wash® NXO Cleaner/Degreaser
TDS # 1607
PRODUCT DESCRIPTION
Electro W ash® N XO C leaner/Degreaser i s a n onozone de pleting, e xtra s trength, nonf lammable
cleaner d egreaser. T his h igh pressure aerosol
cleaning agent quickly removes oxide particles, dust,
light grease and oil, then evaporates quickly, leaving
no residue.
Noncorrosive safe for metals
Nonflammable
Fast Drying
Removes oil, grease, dirt, silicone, flux, adhesive
and other contaminants.
May be used on energized equipment.
TYPICAL APPLICATIONS
Electro-Wash ®NXO Cleaner/Degreaser cleans and
degreases:
Plugs and Sockets
Potentiometers
Circuit Breakers
Solenoids
Switching Devices
Relays & Contacts
Selector Switches
Motors and Generators
COMPATIBILITY
Electro-Wash® NXO cl eaner d egreaser i s
generally compatible with most materials used in
printed circuit board fabrication, except acrylics,
ABS R esins, P olycarbonates, P olystyrenes, a nd
other r esins. W ith a ny cleaning agent
compatibility mu st b e d etermined o n a noncritical area prior to use.
TYPICAL PRODUCT DATA AND PHYSICAL
PROPERTIES
Boiling Point
Flash Point (TCC)
Solubility in Water
@ 77°F/1 atm
Specific Gravity
(water = 1@ 77°F)
Evaporation Rate
(butyl acetate=1)
Appearance Clear, colorless liquid
Odor
Surface Tension
(dynes/cm @ 25°C)
(ASTM D-877)
Kauri-Butanol 120
(KB) Number
CARB 73% 100%
SCAQMD 492 g/L 660
102°F (Initial)
None
5% by weight
Ethereal
NOTE: As with all vapor degreaser equipment and processes, observe
all safety pr ecautions, gui delines and ope rating r ules as sociated
with these units. Failure to do so may put operations personnel at
risk. Avoid excessive vapor losses, loss of refrigeration, excessive
boil s ump he at, e tc. M ake s ure all equipment is ope rated i n
accordance with the manufacturer’s guidelines and instructions. If
in doubt, contact your manufacturer immediately.
Material
Compatibility
Buna-N
Not Recommended
Graphite
Good
HDPE
Good
Kynar
Poor
LDPE
Good
Lexan
Not Recommended
Neoprene
Poor
Noryl
Poor
Cross-Linked PE
Good
Polyacrylate
Not Recommended
Polystyrene
Not Recommended
PVC
Poor
Silicone Rubber
Not Recommended
Teflon
Good
Viton
Poor
ENVIRONMENTAL IMPACT DATA
Aerosol Only
HCFC
0.0%
HFC
25.0%
CL Solv.
0.0%
ODP
0.00
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4 -6 inc hes f rom sur face to clean.
Wash parts from top to bottom, allowing the
liquid to flush away dir t a nd dissolve d
grease. F or optim um pe rformance a nd pin
point control, E lectro-Wash® NXO C leaner
/Degreaser should be used with the attached
extension tube.
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 42.0%
AVAILABILITY
ES1607 12 oz. Aerosol
ES107 1 Gallon Liquid
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics pr ovides a te chnical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
NOTE:
This i nformation i s be lieved t o be a ccurate. It is
intended f or professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no l iability in connection with
damages incurred while using it.
DISTRIBUTED BY:
Loading...