Chemtronics 1217 Data Sheet
@ 77°F
@ 77°F F/1 atm
5 years
CHEMTRONICS
Technical Data Sheet
TDS # 1217
Duster
PRODUCT DESCRIPTION
Duster is a high pr essure duster that removes
particulates from e lectronic de vices. T his
duster / cleaner is nonflammable, residue-free
and won’t scratch delicate surfaces.
Nonflammable
Leaves no residue
High pressure for contamination control
Nonabrasive
Excellent material compatibility
Penetrates hard to reach areas
Contains no ozone depleting compounds
TYPICAL APPLICATIONS
Duster is engineered for all phases of
electronic equipment maintenance and is
particularly suited for applications involving:
Audio/Video Equipment
Fax Machines
Keyboards
Laboratory Instruments
Microcomputers
Photo Equipment
Printers
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.7°F
Vapor Density (air=1)
Solubility in Water
Specific Gravity
(water = 1 @77°F)
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless Gas
Odor
Flash Point (TCC)
Shelflife
COMPATIBILITY
Duster is ge nerally c ompatible w ith m ost
materials used in printed circuit boa rd
fabrication, including sensitive plastics and
compounds. A s w ith a ny duster/cleaner,
compatibility m ust be de termined on a noncritical area prior to use.
3.18
0.10% by weight
1.21
Slight Ethereal
None
Material
Compatibility
Buna-N
Excellent
Graphite
Excellent
HDPE
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Cross-Linked PE
Excellent
Polyacrylate
Excellent
Polystyrene
Excellent
PVC
Excellent
Silicone Rubber
Excellent
Teflon
Excellent
Viton
Excellent
PERFORMANCE
Pressure PSIG / Temperature F
200 - P 150 S - I 100 G - 50 - 0
20
40
60
80
100
120
140
Temperature F
CFC
0.0%
VOC
0.0%
HCFC
0.0%
HFC
100.0%
CL Solv.
0.0%
ODP
0.0
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401
.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are t he co ntent by w eight. O zone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U .S. C lean A ir A ct of 1990. T he O DP of
this product is 0.0. I t i s t he s um of t he O DP of t he
substances t hat m ay c ontribute t o t he de pletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE:
This i nformation is believed to be accurate. It is intended
for professional end users having the skills to evaluate and
use the data properly. CHEMTRONICS does not
guarantee the accuracy of the data and assumes no liability
in connection with damages incurred while using it.
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required
prior to using Duster. Direct high pressure
spray onto the area to be cleaned to remove
dust, dirt and other contaminants. For
optimum performance and pin point control,
use Duster with the attached extension tube.
AVAILABILITY
ES517 5 oz. Aerosol
ES1017 10 oz. Aerosol
ES1217 8 oz. Aerosol
ES1617 12 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
DISTRIBUTED BY:
Loading...