@ 77°F
@ 77°F /1 atm
Liquified Gas
RoHS/WEEE
TDS # 1050E
CHEMTRONICS
Technical Data Sheet
Freez-It
PRODUCT DESCRIPTION
Freez-It is en gineered f or l ocating thermal
intermittent electrical components and cooling printed
circuit boards. T his c ircuit r efrigerant s ystem is
nonflammable, residue-free and provides fast cooling
action.
Nonflammable
High heat transfer
Low static generation
Noncorrosive
Lowers temperature to -60°F (51°C)
Ultra pure, filtered to <0.2 microns
Leaves no residue
Nonabrasive on most surfaces
Contains no CFCs or HCFCs
TYPICAL APPLICATIONS
Freez-It can be used to:
Cool Equipment for Testing
Dissipate Heat While Soldering or
Desoldering
Isolate Thermal Intermittent Components
Test Circuit Traces for Continuity
Test Printed Circuit Boards for Stress
Fractures
Track Intermittent Failures and Shorts
TYPICAL PRODUCT DATA AND PHYSICAL
PROPERTIES
Boiling Point -15.7°F
Vapor Density (air=1)
Solubility in Water
Specific Gravity
(water = 1 @77°F)
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless
Odor
Surface Tension
(dynes/cm @ 77°F)
Flash Point (TCC)
Shelflife 5 years
Status
COMPATIBILITY
Freez-It is generally compatible with most materials
used in printed circuit boa rd f abrication, i ncluding
sensitive pl astics a nd c ompounds. With any circuit
refrigerant, c ompatibility mu st b e d etermined o n a
non-critical area prior to use.
3.18
0.10% by weight
1.21
Slight Ethereal
7.8
None
Material
Compatibility
Buna-N
Fair
Graphite
Good
HDPE
Good
LDPE
Good
Lexan
Poor
Neoprene
Good
Cross-Linked PE
Good
Polyacrylate
Poor
Polystyrene
Good
PVC
Good
Silicone Rubber
Fair
Teflon
Good
Viton
Poor
Competitive Assessment of Freez-It
Chemtronics
Freez-It
33% Less
Static
Competitor’s
Freeze Spray
0 20
40
60 80
100
120
% Static Generation
CFC
0.0%
VOC
0.0%
HCFC
0.0%
HFC
100.0%
CL Solv.
0.0%
ODP
0.0
to e valuate a nd us e t he da ta pr operly.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a t echnical hot line t o a nswer
your technical and application related questions. The
toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required prior to
using Freez-It. Direct spray onto the area to
instantly cool components, circuit boards or
adhesives. For optimum performance and pin point
control, use
Freez-It with the attached extension tube.
AVAILABILITY
ES1050E 10 oz. Aerosol
ES1550E 15 oz. Aerosol
CFC, HCFC, CL. SOLV., V OC, a nd H FC num bers
shown a re t he c ontent by w eight. O zone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U .S. C lean A ir A ct of 1990.
The ODP of this product is 0.0. I t is the sum of the
ODP of the substances t hat m ay c ontribute t o t he
depletion of s tratospheric oz one, ba sed upon t he
weight of each substance in the product’s formulation.
NOTE:
This in formation is believed t o b e accu rate. I t i s
intended f or pr ofessional e nd us ers ha ving t he s kills
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no l iability i n c onnection w ith
damages incurred while using it.
DISTRIBUTED BY:
Loading...