Operating instructions and safety information
decorative fireplaces design CHEMIN'ARTE
http://www.cheminarte.com
Congratulations, you have just purchased a decorative fireplace design Chemin'Arte. We have taken great care to design
quality and workmanship of this product. There are however a number of points to observe and respect for the proper
operation of your fireplce and security depend on it.
DO NOT RAISE THE FIREPLACE IN THE FRONT PANEL AS THESE IS NOT SUPPORTIVE
OF THE FIREPLACE. RAISE THE BODY OF THE FIREPLACE.
General rules for personal safety:
- Although Chemin'Arte up your fireplace and land on a horizontal surface. Decorative fireplace design should be
attached before use.
- The use of fireplaces Chemin'Arte the premises open to the public (ERP) must be a regulated process. It is imperative to
learn before.
- The electric fireplaces Chemin'Arte, must be used with AC 230V (+ / - 10 volts).
- This product is not intended for use by persons (including children) with physical, sensory or mental disability, or persons
lacking experience or knowledge, unless they have been given by means a person responsible for their safety, supervision
or instruction concerning use of the device. Should be monitored to ensure that children do not play with the camera.
- If the cord shows signs of wear or cuts, discontinue using the fireplace.
Prohibitions:
- installation apparatus，not cut off towing beam，beams and rafters or in its slot
- Any intervention by the user on the security features
- Do not use the fireplace in the presence of gasoline or flammable liquid. Do not use outdoors. Do not use when your
hands are wet.
- Do not use in bathrooms, cellars, and generally in any pond or wetland.
- Do not cover the cord, or expose to sharp objects or hot surfaces.
- Do not move the fireplace in use.
- Do not block the air vents of the fireplace. Do not insert objects into the ventilation or air vents. This can cause electric
shock or damage to the fireplace.
- Do not let the fireplace started when no one in the room.
- Do not immerse in water or fire in another liquid.
- Do not lift the front of the fireplace, as this one being interchangeable, the fireplace may fall and cause injury or property
damage.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance
by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Installation in the case of a fireplace Chemin'Arte, set high on a wall:
- Open the box carefully, avoiding scratching the surface with a sharp object.
- Take your fireplace Chemin'Arte its packaging and remove the protective packaging: cartons, plastic contact,
packaging materials, plastic protection.
- The power cord must be connected to a junction box wall for this purpose.
- The connection must be made within the rules of art. If you have any doubts, consult an electrician. For information, the
brown wire must be connected to the phase, neutral and blue to green and yellow earth.
- The fireplace must not be below a socket.
- Most models Chemin'Arte can be fixed against a wall. A mounting bracket is supplied with your fireplace Chemin'Arte.
Because of the many types of walls and installation should be chosen in a specialty store setting appropriate (ankles,
plasterboard screws, etc.)..
- Determine the height you want to install your fireplace Chemin'Arte (usually over 40 cm above the ground) and then
attach the bracket using the appropriate tools.
- Once installed the fireplace wall, place the pebbles or decorative accessories on the central rail and then to the front
panel, making sure it is securely attached to the central body of the fireplace (2 persons are needed for this operation ).
- Council team Chemin'Arte: To be on that once installed, your fireplace will be perfectly straight, use a spirit level when
installing the bracket.
Include in the carton:
Using the remote :
Power － Press to start the fireplace
Heater －Press once to get the ventilation, press again to get the 1000W heater and a thrif time to get the 2000W heater
Flame － Press once to get the flame. Press again to modify the flame brightness (3 levels)
- Protection against overheating:
Warning: To avoid overheating, do not cover the heater.
This protection allows the heating to stop before overheating. This system is activated when it gets too hot in the room or
when the air vents are blocked. For security reasons, heat does not put on automatically. To restart it, unplug the cord from
the electrical outlet, wait 15 minutes then reconnect the power cord into the outlet.
Ceramic logs and stones and other decorative accessories:
The ceramic logs and stones and other accessories sold under the brand Chemin'Arte are objects of decoration. They
should be installed along the track bright and must be handled carefully to avoid damage.
Maintenance and change light bulbs leds:
- Repairs, replacement parts and work on important security features of your fireplace Chemin'Arte, should be performed
only by licensed specialists.
Cleaning the body of fireplaces:
Always remove the fireplace and let it cool before cleaning or servicing.
The bodies of Chemin'Arte fireplaces are cleaned using a soft cloth to dust, damp cloth. Never use alcohol, detergent,
paint thinner or other chemicals.
Warranty:
Chemin'Arte fireplaces are guaranteed 1 year parts and labor.
Contact:
If you have any questions or comments about the use of fireplaces Chemin'Arte, please contact us at: contact@efydis.fr
EFYDIS distributes in France and Europe, the brand Chemin'Arte.
Technical features :
Works on alternative 230V courant.
2 heating devices of 1000W each.
Fuse of 13A.
Works with multicolor leds 2x1W
RETURN PROCEDURE DECORATIVE FIREPLACES
DESIGN
All our fireplaces are guaranteed for 2 years parts and labor. If
during this period there were a malfunction of your product, please
follow the return procedure below (if baught in France) or contact your dealer if baught in any other
European countries :
- Above all else, call customer service at 0951 634 467
to determine the cause of the problem and the solution to.
- Package the defective chimney in its original packaging.
Make sure it is properly protected (especially at the
corners).
- Attach to the original parcel receipt by circling the date
purchase (no photocopies will be accepted) and the name and
the return address of the recipient.
- Send it at your expense, to: EFYDIS 4 allée de l’olivet 07300 Saint Jean de Muzols
- We will repair or replace your defective fireplace
and return it to you at our expense at the adress
mentioned with the package (address in France).
- We will also return the receipt, dated and
buffered to revalidate the warranty.
If you have questions or comments, please contact us at
contact@efydis.fr or www.cheminarte.com or call 0951 634 467 (local call rate).
Loading...