Chelsio Communications R310E-CXA User Manual

R310E-CXA
Active cable
capable
High Performance
10GbE iWARP Adapter
RDMA TCP/IP Cluster Computing••
Highlights
+
RDMA-enabled NIC (RNIC) specifically optimized for cluster computing
+
Standards-compliant iWARP RDMA plus direct data placement (DDP)
+
Seamlessly runs existing InfiniBand RDMA applications
+
Reduces host CPU utilization by up to 90% compared to NICs without full offload capabilities
+
PCI Express 8x host bus interface
+
Line-rate 10Gbps full-duplex performance
+
Integrated traffic manager, QoS, and virtualization capabilities
+
RNIC-PI, kDAPL, and OpenFabrics 1.2 software interfaces
+
Powerful per-connection, per-server, and per-interface configuration and control
Applications
Data-Center Networking
+
Scale up servers and NAS systems
+
Link servers in multiple facilities to syn­chronize data centers
+
Consolidate LAN, SAN, and cluster networks
High Performance Cluster Computing
+
Very low latency Ethernet
+
Increase cluster fabric bandwidth
+
Deploy Ethernet-only networking for clus­ter fabric, LAN, and SAN
+
Routable infrastructure
HELSIOS R310E 10GbE
iWARP Adapter is a pro-
C
With on-board hardware that offloads iWARP RDMA processing from its host system, the R310E frees up host CPU cycles for useful applications. The system gets increased bandwidth, improved overall performance, and reduced message latency across allapplications.
This combination makes it practical to converge other networks that tradi­tionally used niche technologies onto 10GbE. High bandwidth and extremely low latency make 10GbE the best technology for high­performance cluster computing(HPCC) fabrics.
Benefits
By using Chelsio’s R310E, enterprises can cost-effectively connect serv­ers and storage systems directly to the 10GbE backbone over lower-cost CX4 copper oractive optical cabling and switching infrastructure.
As an upgrade or alternative to aggregated Gigabit Ethernet links, 10GbE boosts connection bandwidth and simplifies cabling, installation, and main­tenance. The R310E also provides additional bandwidth needed to con­solidate server functions on fewer, more powerful systems – simplifying management and reducing costs for servers, rackspace, power consump­tion, and maintenance.
Applications with largedata sets benefit from a high-speed distributedplat­form, including video rendering and distribution, data visualization such as remote medical imaging and climatic modeling, and bioinformatics appli­cations such asDNAsequencing.
Chelsio Communications www.chelsio.com sales@chelsio.com +1-408-962-3600•• •
Fully Featured Server Adapter
Specifications
The R310E offers best-of-class performance and features, including IP/UDP/TCP checksum and large send offload, rate control and QoS, virtualization, and rule-basedtraffic steering and filtering.
Third-Generation Protocol Offload Engine
The R310E employs Chelsio’s unique third-generation Terminator 3 ASIC, a high-performance, programmable protocol processor. Terminator 3 processes all connections in a single datapath to deliver line-rate 10Gbps performance with one connection, up to thousands of connections. In contrast, competitive multi-RISC offload engines, which rely on having enough connections to distribute their process­ing among parallel processors to achieve full performance, are ulti­mately limited bythe performance of each processor.
Upper Layer Protocols
The R310E implements a high-capacity, low-latency, high-bandwidth iWARP RDMA/RDDP, which adheres to the IETF standards. It can also run existing unmodified InfiniBand RDMA applications with lower latency and higherbandwidth.
Robust, Proven Solution
Subjected to thousands of hours of compatibility testing, over two years of stress testing by several OEM test suites and production deployments in servers, storage systems and cluster computing, Chelsio’s robust, stable protocol offload technology delivers proven performance in a wide range of environments. The S310E is genera­tions ahead ofcompeting products.
Software Drivers
Chelsio offers a full suite of protocol software and drivers for Linux and Windows with the R310E adapter. The software supports operation in both protocol-offload and non-offload modes.
Product Models
Model:
Physical interface:
Distance:
Connector:
Media:
*Supports active optical cableswithdistances up to 100 meters
R310E-CXA
10GBASE-CX4
15m CX4
Twinaxcopper*
Host Interface
+
PCI Express 1.1 x8, x4, x2, x1
+
MSI-X, MSI and support for legacy pin interrupts
Network Interfaces
+
10GBASE-CX short-reach copper
Ethernet
+
IEEE 802.3ae (10GbE)
+
IEEE 802.1p Priority and 802.1Q VLAN tagging
+
IEEE 802.3x flow control
+
IEEE 802.3ad load-balancing and failover
+
Ether II and 802.3 encapsulated frames
+
Multiple MAC addresses per interface
+
Jumbo Frames up to 9.6Kbytes
Stateless Offloads
+
TCP checksum offload for IPv4 & IPv6
+
TCP Segmentation Offload (TSO) for IPv4 & IPv6
+
UDP checksum offload for IPv4 & IPv6
+
Receive Side Scaling and packet steering
+
Line rate packet filtering and attack protection
TCP/IP Full Offload
+
Full TCP implementation including exceptions
+
High performance in presence of packet loss
+
Extensive RFC compliance, fully featured stack
+
Direct Data Placement (DDP)
+
Up to 64K simultaneous connections capacity
Integrated Traffic Manager
+
Multiple Tx & Rx queues with QoS
+
Simultaneous low latency & high bandwidth
+
Per-connection and per-class rate control
+
Packet loss avoidance
Virtualization and Firewall
+
Rule-based packet steering and filtering capability
High Performance RDMA
+
Ultra-low latency, line rate bandwidth
+
IETF RDDP and RDMAC iWARP compliance
+
APIs: RNIC-PI, kDAPL and OpenFabrics 1.2
Physical and Environmental
+
Dimensions without bracket: 6.6 in. x 2.5 in. or
16.8 cm x 6.4 cm
+
Operating Temp: 0 to 55ºC or 32 to 131ºF
+
Operating Humidity: 5 to 95%
+
Airflow: 200 lf/m
+
Typical power consumption: 14W
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH CHELSIO PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN CHELSIO’S TERMSAND CONDITIONS OF SALE FOR SUCH PRODUCTS, CHELSIO ASSUMES NO LIABILITY WHATSOEVER,AND CHELSIO DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF CHELSIO PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUALPROPERTY RIGHT. CHELSIO PRODUCTS ARE NOT INTENDED FOR USE IN MEDICAL, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS. CHELSIO MAY MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME, WITHOUT NOTICE.
Chelsio Communications www.chelsio.com sales@chelsio.com +1-408-962-3600•• •
MMVIII-0424
Loading...