Checkpoint Systems WRTZ2000 User Manual
UHF-RFID Reader WRTZ-2000 User’s Manual
10058016
Last Updated: February 4, 2015
Revision 00
Checkpoint Systems International GmbH
Brentanostrasse 27-29
69434 Hirschhorn
(06272)928-0
UHF-RFID READER WRTZ-2000
Copyright © 2015 by Checkpoint Systems, Inc.
Released February 15
Published by:
Checkpoint Systems International GmbH.
Brentanostrasse 27-29
69434 Hirschhorn
Germany
UHF-RFID Reader WRTZ-2000 Users Manual
Part Number: 10078784
Trademarks
Checkpoint is a registered trademark of Checkpoint Systems, Inc.
Other product and company names herein may be trademarks of their respective owners.
Other products © or ® their respective manufacturers or copyright holders.
Copyright and Warranty Information
The information in this guide is subject to change without notice.
Because of the changing nature of this product information presented in the UHF-RFID Reader
WRTZ-2000
or other errors of information.
The information presented in the Users Manual may not be copied, used or disclosed to others for the
purpose of procurement or manufacturing without the written permission of Checkpoint Systems, Inc.
This guide and the products discussed in this guide are the exclusive property of Checkpoint Systems
Inc. Copyright laws of the United States protects all information and products.
Copyright© 2015 Checkpoint Systems, Inc. All rights reserved.
Users Manual, Checkpoint Systems, Inc. is not liable for any omissions, misstatements,
UHF-RFID READER WRTZ-2000
Checkpoint Systems Intern. GmbH Company Confidential
Table of contents
1 REVISION CONTROL ...................................................................................... 4
1.1 REVISION HISTORY ....................................................................................... 4
2 BASIC SAFETY INFORMATION ........................................................................... 5
2.2 NOTE ABOUT THE DISPOSAL OF OLD UNITS ............................................................... 6
3 INTRODUCTION ........................................................................................... 7
3.1 I
4 TECHNICAL DATA ......................................................................................... 9
4.1 MECHANICAL DATA ...................................................................................... 9
4.2 FRONT VIEW ............................................................................................ 10
4.3 SIDE VIEW .............................................................................................. 10
4.4 REAR VIEW ............................................................................................. 10
4.5 READER SPECIFICATIONS ................................................................................ 11
4.6 ENVIRONMENT SPECIFICATIONS ......................................................................... 11
4.7 DIGITAL INPUT SPECIFICATION .......................................................................... 12
4.8 INTERPEDESTAL IN SPECIFICATION ...................................................................... 12
4.9 INTERPEDESTAL OUT SPECIFICATION ................................................................... 12
4.10 ETHERNET LAN SPECIFICATION ......................................................................... 13
4.11 RS-232 SPECIFICATIONS ................................................................................ 13
4.12 LAMP PED 1 SPECIFICATION ........................................................................... 14
4.13 LAMP CENTER SPECIFICATION ........................................................................ 14
4.14 LAMP PED 2 SPECIFICATION ........................................................................... 14
4.15 KEY SWITCH .......................................................................................... 14
4.16 BUZZER ................................................................................................ 14
5 ORDERING INFORMATION ............................................................................. 15
6 GLOSSARY ............................................................................................... 16
7 ANNEX DECLARATION OF CONFORMITY ............................................................ 16
NSTALLATION ........................................................................................... 8
Last Updated: 2/9/2015 11:59 AM 3 of 16
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only
1 Revision Control
1.1 Revision History
Content changes to this document from its previous version to the current level are indicated by
Microsoft Word track changes bars (|) in the left margin of the document unless a complete rewrite
is indicated. Accept all tracked changes to the current document before updating it. This procedure
highlights the new changes made to the document by the author thus facilitating efficient review of
the document.
Revision # Revision
Date
00 02/04/15 CR2648 Hans-Günter Meuthen
Change Description and Explanation Created/Changed By
Last Updated: 2/9/2015 11:59 AM 4 of 16
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only
2 Basic safety information
• Read these operating instructions before using the UHF-RFID READER WRTZ-
2000 for the first time! Make yourself completely familiar with the installation and
operation of the UHF-RFID READER WRTZ-2000! Retain these operating
instructions for later reference.
• The UHF-RFID READER WRTZ-2000 is used for contact less reading of RFID
(Radio Frequency Identification) Tags. Only use the UHF-RFID READER
WRTZ-2000 in the manner described in these operating instructions!
• Note all the detailed safety information given within the individual work steps.
All safety information in these operating instructions is identified with the warning
symbol shown here.
• Never use the UHF-RFID READER WRTZ-2000 in areas where there is a danger
of explosion.
• Note that the electric installation of the UHF-RFID READER WRTZ-2000 may
only be done by a professional.
• It is essential to comply with the electrical, mechanical and climatic specifications
given in the Technical Data section. For further information see Chapter Technical
data.
• Do not make any changes or modifications to the UHF-RFID READER
WRT2000. If changes or modifications are made, all guarantee claims are voided.
Furthermore, the radio approval required for its operation is void!
• Have a faulty UHF-RFID READER WRTZ-2000 inspected and repaired by our
repair center. Never make any repairs yourself under any circumstances.
• Dispose of the UHF-RFID READER WRTZ-2000 properly after taking out of
service. Never put the UHF-RFID READER WRTZ-2000 into the normal
household waste.
Federal Communications Commission (FCC) Approval Note:
This device complies with Part 15 of the FCC Rules and standard(s). Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Last Updated:
2/9/2015 11:59 AM
5 of 16
Loading...