Checkpoint TCPP9000 User Manual

The Team CheckP oint Racing Power Supply is perfect for competition level racing as it is capab le of
maintaining 25 amps output current at 12V DC. This power supply delivers clean, smooth, reliable
power and is directly compatible with the CheckPoint TC-1030 charger, as well as other brand
chargers and a huge variety of other DC devices.

SPECIAL FEATURES

• Delivers up to 25 amps while maintaining a smooth, clean 12 volts DC on the output.

• Two sets of 4mm banana output jacks for easy connection of multiple devices.

• Twin cooling fans for better overall effi ciency and lifespan.

• Built-in current limiter automatically prevents damage from accidental overloads.

• Includes a convenient face-mounted power switch with LED indicator.

• Durable, lightweight case.

• Short circuit protection.

• Terminal block adapter with large color-coded terminal posts for easy connection of de vices which ha ve
large alligator clips.

SPECIFICATIONS

• Input voltage: 110-120V 60Hz, 3-prong U.S . power cord

• DC output voltage: 11-15 volts, adjustab le

• DC output current: 25 amps max.

• Max. rated pow er: 300W

• Output connections: 2 sets, 4mm banana jacks, with detachab le terminal block

• Overload protection: 25 amp solid-state current limiter

• Case size: 5.5" x 7.2" x 2.5" [140 x 182 x 64mm]

• Weight: 49 oz. [1375g]

IMPORTANT PRECAUTIONS

• Do not allow water , moisture or f oreign objects into the po wer supply.

• Do not cover the air intak e, f an, and other v ent holes. This will cause the power supply to ov erheat.

• Do not exceed 120V A C input.

• Do not leave the po wer supply connected to A C when unused.

• Do not open or attempt to repair the power supply at any time. Contact Hobby Services for any
and all repair needs.

• Keep out of reach of children.

25 AMP

RACING POWER

SUPPLY

2

AC INPUT POWER

The Team CheckPoint 25 Amp Racing Power Supply accepts power from a 110V AC source. This
is a “switching” power supply as opposed to a linear power supply which employs a high frequency
switch-mode design to conver t 110V AC input to a 12V DC output. This state-of-the-art technology
allows the power supply to operate entirely without a big, hea vy internal transf ormer and results in a
very small, and lightweight device that can deliver a tremendous amount of power. This technology
also generates highly effi cient and clean DC output. This is especially valuable today as many R/C
chargers utilize peak detection designs which are very sensitive and demand the cleanest power
sources possible in order to maintain error-free operation.

DC OUTPUT POWER

The Team CheckPoint 25 Amp Racing Power Supply has an adjustable
output voltage range of 11-15V DC and provides a maximum 25 amps.
For best results, setting this to appro ximately 13V will help ensure battery
chargers have the power necessar y to fully charge batteries to the very
end. If it seems the battery charger is underpowered, increase the output
voltage slightly.

POWER SWITCH

The power switch has a red LED to clearly show when the s witch is in the on position. The LED does
not illuminate when the switch is in the off position. It’s recommended to turn the power supply off
when not in use to extend it’s lifespan.

COOLING FANS

Twin built-in rear mounted cooling fans keep electronics cool to help maintain optimum effi ciency
and extend the lif e of the power supply. One fan will begin to run immediately when pow er is switched
on and will run constantly until power is switched off. The second fan is controlled by a sensor and
will switch on and off as needed as heat within the power supply rises and falls.

CASE

The case is vented to allow easy airfl ow across electronic components to assist the fans with cooling.
The top of the case is fl at to allow chargers and other devices to be easily stacked on top to free up
much needed bench space.

WARNING: NEVER set any small objects such as nuts, screws, washers, etc. on top of the
case because they could very easily fall through the vents and cause per manent damage to the
power supply.

W ARNING: ALWAYS ha ve at least one inch of unobstructed area around both sides and rear of the
case for good ventilation to allow the fans to properly cool the power supply.

3

CONNECTING EXTERNAL DEVICES

Always connect the red (+) positive lead from your charger or other external device (or the included
terminal block) to the red (+) positive terminal on the power supply, and the black (-) negative lead
from your charger or other external device (or the included terminal block) to the black (-) negative
terminal on the power supply.

Note: The black and red terminal caps can be unscrewed and removed if needed.
WARNING: ALWAYS ensure polarity is correct when connecting external devices to the power

supply. Reverse polarity will not damage the power supply but it may damage the external device.
WARNING: NEVER attempt to connect batteries directly to the output of the power supply!

TERMINAL BLOCK ADAPTER

A terminal block adapter is included for convenient
connection of external devices which have alligator
clips on their input power leads. This also allows the
adapter to be located away from the power supply
itself which can be very convenient in crowded work
spaces. The terminal block has two large, metal
terminals or “posts” which are clearly marked for
polarity; one terminal is red for positiv e (+) polarity, the
other terminal is black for negative (-) polarity. When
connecting external devices to the terminal block, be
sure to make a solid physical connection to avoid
intermittent power delivery to the external device.

WARNING: Do not allow wires or other metal objects to accidentally make contact simultaneously
with both terminals, as a short circuit condition will exist.

SAFETY FEATURES

The Team CheckPoint 25 Amp Racing Power Supply has a 25 amp solid-state current limiter for
overload protection, plus short circuit protection. If either of these conditions occur, disconnect the
supply from the AC input, wait approximately 15 seconds to allow the device to reset, and then re­connect to the AC input.

Twin built-in rear mounted cooling fans keep electronics cool to help maintain optimum effi ciency
and extend the life of the power supply.

WARNING: Do not block the air vents on the power supply. Make sure there is ample room for air to
enter and leave the power supply so heat can dissipate effi ciently.

1-YEAR LIMITED WARRANTY – *USA AND CANADA ONLY

Team CheckPoint warrants this product to be free from defects in materials and workmanship for
period of one (1) year from the date of purchase. During that period, Team CheckPoint will, at its
option, repair or replace without service charge any product deemed defective due to those causes.
You will be required to provide proof of purchase (invoice or receipt). This warranty does not cover
damage caused by abuse, misuse, alteration or accident. If there is damage stemming from these
causes within the stated warranty period, Team CheckPoint will, at its option, repair or replace it for
a service charge not greater than 50% of its then current retail list price. Be sure to include your
daytime telephone number in case we need to contact y ou about your repair . This w arranty gives y ou
specifi c rights. You may also have other rights, which vary from state to state.

For service on your Team CheckPoint product, warranty or non-warranty, send it post-paid and
insured to:

HOBBY SERVICES

3002 N. Apollo Drive, Suite 1

Champaign, IL 61822

[phone]

[e-mail]

*For warranty and service information if purchased outside the USA or Canada, see the additional
warranty information insert (if applicable) or ask your retailer for more information.

www.teamcheckpoint.com

www.odonnellracing.com

TCPZ9000 for TCPP9000Contents © Copyright 2008 Made in Hong Kong