CHAUVIN ARNOUX F01, F03, F05, F07, F09 User Manual

F01 - F03
F05 - F07

F09

RMS

Multimeter

clamps

■ For measurement of voltage, current resistance, temperature,

power and frequency

■ Measures RMS for all currents, sinusoidal and distorted

■ Enhanced ergonomics for ease of use

■ Auto AC/DC, Auto-range, Hold, Backlit LCD screen

■ Optimal safety: V-live protection, EN 61010-1, 600V Cat III

■ Compliant with IEC 61010 CAT II 1000 V / CAT III 600 V / CAT IV 300 V

Enhanced ergonomics. High performance in a handy compact design:
for all-purpose multimeter clamps that offer more.

A world of professional measurement at hands reach

Function/Model F01 F03 F05 F07 F09

[AC+DC], [AC+DC],

[AC], DC [AC], DC

AC / DC current AC • •

••

AC / DC voltage • • •

••
Power (W, VA, var, PF) • •
single- and three-phase
Phase rotation • •
Motor start-up (InRush) • • •
Temperature • •
Frequency •••
Backlit LCD display • •

•

•
Automatic switch-off • • • • •
Display Hold function • • • • •
Battery level indicator • • • • •
Presence of dangerous voltage (V-live) • • • • •
Aut oma t i c AC / D C Choice of automatic/manual mode • • • •
Automatic zero DC • •

•

•
Lead Resistance compensation • •

•

•
Min / M ax 100 ms • • • •
Peak 500 µs • • • •

A strong inrush current may set off its safety system or even
damage your installation. The "Inrush current" function measures
the evolution of the motor's start-up current, without requiring
graphic display, and defines the amplitude-time parameters of
the motor's safety device.

The Inrush function enables you to

obtain true RMS values for a sinusoidal

current calculated on ,1 , 2

1/2

, 5 and

10 signal intervals

1
2

Measuring motor

inrush currents

Select your clamp

■ High-performance and compact.

F0x multimeter clamps measure true RMS for all
currents, even the most distorted. The reading
displayed is true!

■ More than a simple multimeter!

Combining advanced technology and compact design,
these clamps propose a wide range of professional
measurements in a single apparatus!

•

AC/DC voltage

•

AC/DC intensity

•

resistance with audible continuity and semi­conductor test

•

Frequency

•

Single and balanced three-phase power

•

Temperature

•

Adapter function allowing the addition of probes
adapted to different physical measurements:
hygrometry, light metering, tachometry, etc.

■ Other special features

On three-phase systems, the phase rotation
sequence is indicated.
A Min/Max button allows access to minimum and
maximum values (AC and DC) as well as to the peak
values of a signal.
Another "extra": in resistance mode the semi­conductor test (or diode test) verifies that the
different components are functioning correctly, and
detects any short-circuits or cuts on your installation.

■ Measuring motor inrush currents

Measurement [in true RMS] [AC] [AC], DC [AC], DC

(W and PF

single-phase only)

TRMS TRMS

I(A)

I rms

1

( )

T

–

2

I rms

(10 T)

1

T

T2 T

–

2

1

–

2

5 T t (s)