Chauvet Pro Ovation GR1-Adaptor Quick Start Guide

Page 1
Quick Reference Guide
English EN Español ES Français FR Deutschland DE Nederlands NL
Page 2
!
EN

About This Guide

The Ovation GR-1 Adapter Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE. For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany:
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified in and subject to the exclusions and limitations set forth in, the full limited warranty on our website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

Contact

Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a product. Visit Contact Us at the end of this QRG for contact information.

What is Included

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Cable

The Ovation GR-1 Adapter comes with a Neutrik® powerCON® power linking cable. If another type of plug is needed, use the table below.

AC Plug

www.chauvetlighting.eu/warranty-registration/
DO NOT open this product. It contains no user-serviceable parts.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
USE a safety cable when mounting this product overhead.
DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it. (IP20)
DO NOT operate this product if the housing or cables appear damaged.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
In the event of a serious operating problem, stop using immediately.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
Ovation GR-1 Adapter
Neutrik® powerCON® powerlinking cord
Quick Reference Guide
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass AC Neutral White Blue Silver AC Ground Green/Yellow Green/Yellow Green
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
1
Ovation GR-1 Adapter QRG Rev. 1
Page 3
QUICK REFERENCE GUIDE
Ovation GR-1 IP
Mounting Clamp
Unscrew mounting clamp from the Ovation GR-1 Adapter
Attach the Ovation GR-1 Adapter to the yoke of the fixture
Connect the power cable from the fixture to the Ovation GR-1 Adapter and the power/data cable to the Ovation GR-1 IP.
Power up fixture and set up the Ovation GR-1 Adapter as desired
EN

DMX Linking

The Ovation GR-1 Adapter will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available from www.chauvetprofessional.com.

Master/Slave Connection

The Ovation GR-1 Adapter uses the DMX data connection for its master/slave mode. Ovation GR-1 Adapter (the master) to control one or more Ovation GR-1 Adapter products (the slaves) without a DMX controller. One Ovation GR-1 Adapter becomes the master when running slave’s control panel to operate in Slave mode. During Master/Slave operation, the slaves will operate in unison with the master.
Gobo Rotator

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers have this capability. The Ovation GR-1 Adapter supports RDM protocol that allows feedback to make changes to menu map options.

Mounting

Before mounting this product, read the Safety Notes. Use at least one mounting point per product.

Product Mounting Diagram

The Master/Slave mode allows an
mode. You must configure each
Ovation GR-1 Adapter QRG Rev. 1
2
Page 4
EN

Control Panel Description

Button Function
<MENU> Exits from the current menu or function
<ENTER>
<UP>
<DOWN>

Menu Map

Main Level Programming Levels Description
DMX Address 001-512 Sets the DMX starting address Gobo Rotator 000-255 Index/Speed of gobo rotation
Master/Slave
Back Light
Fixture Hours <_ _ _ _H>
Information
Reset Factory
Version <V_._> Shows current firmware version
Enables the currently displayed menu or sets the currently selected value into the selected function
Navigates upwards through the menu list or increases the numeric value when in a function
Navigates downwards through the menu list or decreases the numeric value when in a function
Master DMX mode (Master)
Slave Slave mode
On Display backlight always on
10S
20S
30S
UID <_ _ _ _ _ _ _ _ _ _ _ _> Shows product UID
No
Yes
Turns off display backlight after 10 seconds of inactivity
Turns off display backlight after 20 seconds of inactivity
Turns off display backlight after 30 seconds of inactivity
Shows total hours the product has been powered on
Resets the product to factory default settings

DMX Values

Channel Function Value Percent/Setting
1 Gobo Rotator
000 127 128 190 191 192 193 255
Index Clockwise fast to slow Stop Counter-clockwise slow to fast
3
Ovation GR-1 Adapter QRG Rev. 1
Page 5
GUÍA DE REFERENCIA RÁPIDA
ES

Acerca de Esta Guía

La Guía de Referencia Rápida (GRR) del Ovation GR-1 Adapter contiene información básica sobre el producto, como montaje, opciones de menú y valores DMX. Descargue el Manual de Usuario de www.chauvetprofessional.com para información más detallada.

Exención de Responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a cambio sin previo aviso.

GARANTÍA LIMITADA

PARA VER EL REGISTRO DE GARANTÍA Y LOS TÉRMINOS Y CONDICIONES COMPLETOS, VISITE NUESTRO SITIO WEB.
Para clientes en los Estados Unidos y México: www.chauvetlighting.com/warranty-registration Para clientes en Reino Unido, República de Irlanda, Bélgica, Países Bajos, Luxemburgo, Francia y Alemania:
www.chauvetlighting.eu/warranty-registration/
Chauvet garantiza que este producto estará libre de defectos de material y mano de obra en condiciones de uso normales, durante el periodo especificado, sujeto siempre a las exclusiones y limitaciones establecidas en la garantía limitada completa de nuestro sitio web. Esta garantía se concede únicamente al comprador original del producto y no es transferible. Para ejercer los derechos que otorga esta garantía, usted debe proporcionar una prueba de compra en forma de un recibo de compra original, expedido por un distribuidor autorizado, donde figure el nombre del producto y la fecha de compra. NO EXISTEN OTRAS GARANTÍAS EXPRESAS NI IMPLÍCITAS. Esta garantía le otorga derechos legales específicos. Es posible que a usted le asistan otros derechos, que variarán dependiendo del estado o del país. Esta garantía solamente es válida en los Estados Unidos, Reino Unido, República de Irlanda, Bélgica, Países Bajos, Luxemburgo, Francia, Alemania y México. Para conocer los términos de garantía en otros países, consulte a su distribuidor local.

Notas de Seguridad

NO abra este producto. No contiene piezas reparables por el usuario.
Para evitar un desgaste innecesario y alargar su vida útil, desconecte complemente el producto de la alimentación, mediante el interruptor o desenchufándolo, durante los periodos en los que no se use.
Monte este producto en una ubicación con ventilación adecuada, al menos a 20'' (50 cm) de superficies adyacentes.
NO deje ningún material inflamable a menos de 50 cm de este producto mientras esté funcionando o conectado a la alimentación.
Cuidado: cuando transfiera el producto desde ambientes con temperatura extrema (p. ej., del remolque frío de un camión a una sala de baile con calor y humedad), puede formarse condensación en la electrónica interna del producto. Para evitar que se produzca una avería, deje que el producto se aclimate completamente al ambiente antes de conectar la alimentación.
USE un cable de seguridad cuando monte este producto en lo alto.
NO ponga en funcionamiento este producto en el exterior o en cualquier ubicación en la que el polvo, calor excesivo, agua o humedad puedan afectarlo. (IP20).
NO ponga en funcionamiento este producto si sospecha que la carcasa, lentes o cables están dañados.
NO conecte este producto a un atenuador o reostato.
Conecte este producto SOLO a un circuito con toma de tierra y protegido.
Use SOLAMENTE los soportes de colgar/montar para mover este producto.
En caso de un problema grave de funcionamiento, deje de usarlo inmediatamente.
La máxima temperatura ambiente es de 113 °F (45 °C). No haga funcionar este producto a temperaturas más altas.

Contacto

Fuera de EE. UU., Reino Unido, Irlanda, Benelux, Francia, Alemania o México, póngase en contacto con su distribuidor para solicitar asistencia o devolver el producto.Visite

Qué va Incluido

Ovation GR-1 Adapter
Cable de alimentación en cadena Neutrik® powerCON®
Guía de Referencia Rápida
Contact Us para información de contacto.
Ovation GR-1 Adapter QRG Rev. 1
4
Page 6
GUÍA DE REFERENCIA RÁPIDA
!
ES

Corriente Alterna

Este producto tiene una fuente de alimentación con detección automática que puede funcionar con un rango de tensión de entrada de100 a 240 VCA, 50/60 Hz.

Cable

El Ovation GR-1 Adapter viene con un cable de alimentación en cadena Neutrik® powerCON®. Si necesita otro tipo de enchufe, consulte la tabla de abajo.

Enchufe CA

Conexión Cable (EE.UU.) Cable (Europa) Color del tornillo
CA Cargado Negro Marrón Amarillo/Latón
CA Neutro Blanco Azul Plata
CA Tierra Verde/Amarillo Verde/Amarillo Verde
Para evitar un desgaste innecesario y alargar su vida útil, desconecte complemente el producto de la alimentación, mediante el interruptor o desenchufándolo, durante los periodos en los que no se use.

Enlace DMX

El Ovation GR-1 Adapter funcionará con un controlador DMX usando una conexión serie DMX normal. Hay un manual DMX disponible en www.chauvetprofessional.com.

Conexión Maestro/Esclavo

El Ovation GR-1 Adapter usa la conexión de datos DMX para su modo maestro/esclavo. El modo Maestro/Esclavo permite que un Ovation GR-1 Adapter (el maestro), controle uno o más productos Ovation GR-1 Adapter (los esclavos) sin un controlador DMX. El Ovation GR-1 Adapter se convierte en maestro cuando funciona en modo Rotador de gobo. Es preciso configurar cada panel de control del esclavo para que funcione en modo Esclavo. Durante el funcionamiento Maestro/Esclavo, los esclavos funcionarán al unísono con el maestro.

RDM (gestión remota del dispositivo)

Remote Device Management (gestión remota del dispositivo) o RDM, es un estándar que permite a los dispositivos con capacidad DMX una comunicación bidireccional por un cableado DMX existente. El Ovation GR-1 Adapter admite protocolo RDM, que posibilita información para supervisar cambiar las opciones del mapa de menú.
5
Ovation GR-1 Adapter QRG Rev. 1
Page 7
GUÍA DE REFERENCIA RÁPIDA
Ovation GR-1 IP
Abrazadera de Montaje
Desatornille la abrazadera de montaje del Ovation GR-1 Adapter
Acople el Ovation GR-1 Adapter al yugo del aparato
Conecte el cable de alimentación del aparato al Ovation GR-1 Adapter y el cable de alimentación/ datos al Ovation GR-1 Adapter.
Encienda el aparato y configure el Ovation GR-1 Adapter como desee
ES

Montaje

Antes de montar este producto, lea las Notas de Seguridad. Asegúrese de que las abrazaderas de montaje son capaces de soportar el peso del producto.

Diagrama de Montaje del Producto

Descripción del Panel de Control

Botón Función
<MENU> Sale del menú o función actual
<ENTER>
<UP>
<DOWN>
.
Habilita el menú actualmente en pantalla o configura el valor seleccionado actualmente dentro de la función seleccionada
Navega hacia arriba por la lista de menú o aumenta el valor numérico cuando está en una función
Navega hacia abajo por la lista de menú o disminuye el valor numérico cuando está en una función
Ovation GR-1 Adapter QRG Rev. 1
6
Page 8
GUÍA DE REFERENCIA RÁPIDA
ES

Mapa de Menú

Nivel Principal Niveles de Programación Descripción
DMX Address 001-512 Selecciona la dirección DMX de inicio Gobo Rotator 000-255 Índice/Velocidad de rotación de gobo
Master/Slave
Back Light
Information
Reset Factory
Fixture Hours <_ _ _ _H>
Version <V_._>
UID <_ _ _ _ _ _ _ _ _ _ _ _> Muestra el UID # del producto
Master Modo DMX
Slave Modo Maestro/Esclavo
On
10S
20S
30S
No
Yes
Retro-iluminación de la pantalla siempre activa
Retro-iluminación de la pantalla se apaga después de 10 segundos de inactividad
Retro-iluminación de la pantalla se apaga después de 20 segundos de inactividad
Retro-iluminación de la pantalla se apaga después de 30 segundos de inactividad
Muestra el nombre total de las horas del producto
Muestra instalada la versión de firmware
Reinicia a la configuración de fábrica

Valores DMX

Canal Función Valor Porcentaje/Configuración
1 Gobo giratorio
000 127 128 190 191 192 193 255
Índice de gobo giratorio
Giro en el sentido horario, lento a rápido Parada Giro en el sentido anti-horario, lento a rápido
7
Ovation GR-1 Adapter QRG Rev. 1
Page 9
MANUEL DE RÉFÉRENCE
FR

À Propos de ce Manuel

Le Manuel de Référence du Ovation GR-1 Adapter (MR) reprend des informations de base sur cet appareil notamment en matière de connexions, montage, options de menu et valeurs DMX. Télécharger le Manuel d'Utilisation sur
www.chauvetprofessional.com pour de plus amples informations.

Clause de Non-Responsabilité

Les informations et caractéristiques contenues dans ce manuel sont sujettes à changement sans préavis.

GARANTIE LIMITÉE

VEUILLEZ VISITER NOTRE SITE INTERNET POUR CONSULTER LES MODALITÉES D'ENREGISTREMENT DE LA GARANTIE ET LES CONDITIONS GÉNÉRALES COMPLÈTES.
Pour les clients aux États-Unis et au Mexique: www.chauvetlighting.com/warranty-registration Pour les clients du Royaume-Uni, de la République d'Irlande, de la Belgique, des Pays-Bas, du Luxembourg, de
la France et de l'Allemagne:
Chauvet garantit que cet appareil est exempt de défauts de matériaux et de fabrication dans des conditions normales d'utilisation, pendant la période spécifiée dans la garantie limitée complète consultable sur notre site Internet et sous réserve des exclusions et limitations qui y sont énoncées. Cette garantie ne s'applique qu'à l'acheteur initial du produit et n'est pas transférable. Pour exercer les droits prévus par cette garantie, vous devez fournir une preuve d'achat sous la forme d'un reçu de vente original d'un revendeur autorisé qui indique le nom du produit et la date d'achat. IL N'EXISTE AUCUNE AUTRE GARANTIE EXPRESSE OU IMPLICITE. Cette garantie vous confère des droits légaux spécifique. Vous pouvez également bénéficier d'autres droits qui varient selon les états et les pays. Cette garantie n'est valable qu'aux États-Unis, au Royaume-Uni, en République d'Irlande, en Belgique, aux Pays-Bas, au Luxembourg, en France, en Allemagne et au Mexique. Pour connaître les conditions de garantie dans d'autres pays, veuillez consulter votre revendeur local.

Consignes de Sécurité

N’ouvrez PAS cet appareil. Il ne contient aucun composant susceptible d’être réparé par l’utilisateur.
Durant les périodes de non-utilisation, pour éviter tout usure inutile et pour prolonger la durée de vie, déconnectez­entièrement l'appareil en le débranchant de l'alimentation électrique ou en coupant le disjoncteur.
Montez toujours cet appareil dans en endroit bien ventilé, à au moins, 20 pouces (50 cm) des surfaces adjacentes.
Ne laissez AUCUNE source inflammable dans un rayon de 50 cm de l’appareil lorsque celui-ci fonctionne.
Attention : Lorsque l'appareil est transféré d'un environnement à température extrême à un autre (par exemple d'un camion froid vers une salle de bal chaude et humide), de la condensation peut se former sur les composants électriques internes. Pour éviter de causer des dommages, laissez l'appareil s'acclimater entièrement au milieu environnant avant de le mettre sous tension.
Utilisez TOUJOURS un câble de sécurité lorsque vous montez cet appareil en hauteur.
N’utilisez PAS ce produit en extérieur ou tout autre endroit où de la poussière, une chaleur excessive, de l'eau ou de l'humidité pour en affecter le fonctionnement. (IP20)
N’utilisez PAS ce produit si le boîtier, les lentilles ou les câbles vous semblent endommagés.
Ne connectez PAS ce produit ni à un gradateur ni à un rhéostat.
Connectez UNIQUEMENT ce produit à un circuit protégé et relié à la terre.
Transportez/Suspendez ce produit UNIQUEMENT au moyen de la poignée ou lyre de suspension dont il est doté.
En cas de sérieux problèmes de fonctionnement, arrêtez le système immédiatement.
La température ambiante maximale supportée par ce produit est de 113 °F (45 °C). Ne le faites pas fonctionner à des températures plus élevées.

Contact

En dehors des États-Unis, du Royaume-Uni, de l'Irlande, du Benelux, de la France, de l’Allemagne, ou du Mexique, contactez votre fournisseur si vous avez besoin d'assistance ou de retourner votre appareil. Consultez le site Contact Us pour trouver nos coordonnées.

Ce Qui est Inclus

Ovation GR-1 Adapter
Câble de chaînage électrique Neutrik® powerCON®
Manuel de Référence

Alimentation CA

Cet appareil est doté d'une alimentation universelle prenant en charge toute tension d'entrée comprise entre 100 et 240 VCA, 50/60 Hz.

Câble

L'Ovation GR-1 Adapter est livré avec un câble d'alimentation Neutrik® powerCON®. Si vous avez besoin d'un autre type de prise, utilisez le tableau ci-dessous.
www.chauvetlighting.eu/warranty-registration/
Ovation GR-1 Adapter QRG Rev. 1
8
Page 10
MANUEL DE RÉFÉRENCE
!
FR

Prise CA

Connexion Câble (États-Unis) Câble (Europe) Couleur de la vis
Conducteur CA Noir Marron Jaune/Cuivré
Neutre CA Blanc Bleu Argenté
Te rr e C A Vert/Jaune Vert/Jaune Vert
Durant les périodes de non-utilisation, pour éviter tout usure inutile et pour prolonger la durée de vie, déconnectez-entièrement l'appareil en le débranchant de l'alimentation électrique ou en coupant le disjoncteur.

Raccordement DMX

Le Ovation GR-1 Adapter fonctionnera avec un jeu d'orgues DMX au moyen de connexions DMX en série standard. Une introduction au DMX est à votre disposition sur

Connexion Maître/ Esclave

L'Ovation GR-1 Adapter utilise une connexion de données DMX pour son mode maître/esclave. Le mode maître/esclave permet à un Ovation GR-1 Adapter (le maître) de contrôler un ou plusieurs appareils Ovation GR-1 Adapter (les esclaves) sans contrôleur DMX. Un Ovation GR-1 Adapter devient le maître lors de l'exécution du mode Gobo Rotator. Vous devez configurer le panneau de commande de chaque esclave pour qu'il puisse fonctionner en mode Esclave. Pendant le fonctionnement maître/esclave, les esclaves fonctionnent à l'unisson avec le maître.

RDM (Gestion des périphériques à distance)

Le protocole RDM (gestion des périphériques à distance) est un standard pour la communication bidirectionnelle des appareils dotés de fonctions DMX dans un câblage DMX existant. Le Ovation GR-1 Adapter supporte le protocole RDM permettant un retour d'information pour la surveillance et des changements des options de menu. Veuillez télécharger le manuel de l'utilisateur à partir du site internet

Installation

Avant de monter cet appareil, lisez et assimilez les Consignes de Sécurité. Veillez à ce que les fixations sont capables de supporter le poids de l'unité.
www.chauvetprofessional.com.
www.chauvetprofessional.com pour plus de détails.
9
Ovation GR-1 Adapter QRG Rev. 1
Page 11

Schéma de Montage de l'Appareil

Ovation GR-1 IP
Clip de Fixation
Dévisser le collier de fixation de l'Ovation GR-1 Adapter
Fixez l'Ovation GR-1 Adapter sur à l'étrier de l'appareil
Connectez le câble d'alimentation de l'appareil à l'Ovation GR-1 Adapter et le câble d'alimentation/ de données à l'Ovation GR-1 IP.
Mettez l'appareil sous tension et réglez l'Ovation GR-1 Adapter comme vous le souhaitez
MANUEL DE RÉFÉRENCE
FR

Description du Tableau de Commandes

Bouton Fonction
<MENU> Permet la sortie du menu ou de la fonction en cours
<ENTER>
<UP>
<DOWN>
Permet l’affichage du menu en cours ou permet de configurer la valeur en cours dans la fonction sélectionnée
Permet de parcourir les listes ou les menus vers le haut, dans une fonction permet d'augmenter les valeurs numériques
Permet de parcourir les listes ou les menus vers le bas, dans une fonction permet de diminuer les valeurs numériques
Ovation GR-1 Adapter QRG Rev. 1
10
Page 12
MANUEL DE RÉFÉRENCE
FR

Tableu de Menu

Niveau
Principal
DMX Address 001-512 Sélectionne l’adresse DMX de départ Gobo Rotator 000-255 Indice / Vitesse de rotation des gobos
Master/Slave
Back Light
Fixture Hours <_ _ _ _H>
Information
Reset Factory
Version <V_._> Affiche la version du logiciel installée
Niveaux de Programmation Description
Master Mode DMX
Slave Mode maître/esclave
On
10S
20S
30S
UID <_ _ _ _ _ _ _ _ _ _ _ _> Affiche UID actuel
No
Yes
Affichage rétro-éclairage toujours active
Désactive l'affichage rétro-éclairage après 10 secondes d'inactivité
Désactive l'affichage rétro-éclairage après 20 secondes d'inactivité
Désactive l'affichage rétro-éclairage après 30 secondes d'inactivité
Affiche le nombre total des heures du produit
Permet de réinitialiser aux valeurs par défaut d'usine

Valeurs DMX

Cana Fonction Valeur Pourcentage/Configuration
1
Rotation de Gobo
000 127 128 190 191 192 193 255
Index de rotation de gobo Rotation horaire, lent à rapide Arrêt Rotation antihoraire, lent à rapide
11
Ovation GR-1 Adapter QRG Rev. 1
Page 13
SCHNELLANLEITUNG
DE

Über diese Schnellanleitung

In der Schnellanleitung des Ovation GR-1 Adapter finden Sie die wesentlichen Produktinformationen, wie etwa über den Anschluss, die Montage, Menüoptionen und DMX-Werte des Geräts. Laden Sie für weiterführende Informationen unter
www.chauvetprofessional.com das Benutzerhandbuch herunter.

Haftungsausschluss

Die in dieser Anleitung aufgeführten Informationen und Spezifikationen können ohne vorherige Ankündigung geändert werden.

EINGESCHRÄNKTE GARANTIE

ZUR REGISTRIERUNG FÜR GARANTIEANSPRÜCHE UND ZUR EINSICHT IN DIE VOLLSTÄNDIGEN GESCHÄFTSBEDINGUNGEN BESUCHEN SIE BITTE UNSERE WEBSITE.
Für Kunden in den USA und in Mexiko: www.chauvetlighting.com/warranty-registration Für Kunden im Vereinigten Königreich, in Irland, Belgien, den Niederlanden, Luxemburg, Frankreich und
Deutschland:
Chauvet garantiert für die in der auf unserer Website veröffentlichten vollständigen eingeschränkten Garantie genannten Dauer und unter Vorbehalt der darin genannten Haftungsausschlüsse und -beschränkungen, dass dieses Produkt bei normalen Gebrauch frei von Material- und Verarbeitungsfehlern ist. Diese Garantie erstreckt sich nur auf den Erstkäufer des Produkts und ist nicht übertragbar. Zur Ausübung der unter dieser Garantie gewährten Rechte ist der Kaufbeleg in Form der Originalrechnung von einem autorisierten Händler vorzulegen, in der die Produktbezeichnung und das Kaufdatum vermerkt sein müssen. ES BESTEHEN KEINE WEITEREN AUSDRÜCKLICHEN ODER STILLSCHWEIGENDEN GARANTIEN. Diese Garantie gibt Ihnen besondere gesetzliche Rechte. Und Sie haben möglicherweise weitere Rechte, die von Land zu Land unterschiedlich sein können. Diese Garantie ist nur in den USA, im Vereinigten Königreich, in Irland, Belgien, den Niederlanden, Luxemburg, Frankreich, Deutschland und Mexiko gültig. Bezüglich der Garantiebestimmungen in anderen Ländern wenden Sie sich bitte an Ihren lokalen Händler.

Sicherheitshinweise

Dieses Gerät NICHT öffnen. Die eingebauten Komponenten sind für den Kunden wartungsfrei.
Um unnötigen Verschleiß zu vermeiden und die Lebensdauer des Geräts zu verlängern, trennen Sie während
Installieren Sie das Gerät an einem Ort mit ausreichender Belüftung und mit einem Abstand von mindestens 50
Belassen Sie KEINE entflammbaren Materialien in einem Umkreis von 50 cm dieses Geräts, während es in
VORSICHT: Beim Transport des Geräts von einer Umgebung mit außergewöhnlichen Temperaturen in eine
VERWENDEN Sie bei Montage über Kopf immer ein Sicherungsseil.
Nehmen sie das Gerät NICHT im Freien oder an einem Ort in Betrieb, der durch Staubentwicklung, übermäßige
NIEMALS das Gerät in Betrieb nehmen, wenn Ihnen das Gehäuse, die Linsen oder das Kabel beschädigt
Schließen Sie dieses Gerät NICHT an einen Dimmer oder Regelwiderstand an.
Schließen Sie dieses Produkt NUR an einen mit der Erde verbundenen und geschützten Stromkreis an.
Bei ernsthaften Betriebsproblemen stoppen Sie umgehend die Verwendung des Geräts.
Die maximal zulässige Umgebungstemperatur beträgt 45 °C. Nehmen Sie das Gerät nicht bei höheren

Kontakt

Kunden außerhalb der USA, GB, Irland, Mexiko, Frankreichs, Deutschlands oder der Benelux-Staaten wenden sich an ihren Lieferanten, um den Kundensupport in Anspruch zu nehmen oder ein Produkt zurückzuschicken. Kunden innerhalb der USA, GB, Irland, Mexiko, Frankreichs, Deutschlands oder der Benelux-Länder verwenden bitte die Informationen unter
Contact Us am Ende dieser Schnellanleitung.

Packungsinhalt

Ovation GR-1 Adapter
Kabel für Serienschaltung Neutrik® powerCON®
Schnellanleitung
www.chauvetlighting.eu/warranty-registration/
längerer Perioden des Nichtgebrauchs das Gerät vom Stromnetz – entweder per Trennschalter oder durch Herausziehen des Steckers aus der Steckdose.
cm zu den angrenzenden Flächen.
Betrieb oder an der Stromversorgung angeschlossen ist.
andere solche Umgebung (z. B. aus einem kalten Transporter in einen warm-feuchten Ballsaal) kann an der im Gerät enthaltenen Elektronik Wasser kondensieren. Um einen Defekt zu vermeiden, muss sich das Gerät erst in der neuen Umgebung akklimatisiert haben, bevor es an die Stromversorgung angeschlossen werden kann.
Hitze, Wasser oder hohe Luftfeuchtigkeit charakterisiert ist. (IP20)
erscheinen.
Temperaturen in Betrieb
Ovation GR-1 Adapter SAL Rev. 1
12
Page 14
SCHNELLANLEITUNG
!
DE

Wechselstrom

Dieses Gerät verfügt über ein Vorschaltgerät, das automatisch die anliegende Spannung erkennt, sobald der Netzstecker in die Schukosteckdose gesteckt wird, und kann mit einer Eingangsspannung von 100~240 V AC, 50/60 Hz arbeiten

Kabel

Der Ovation GR-1 Adapter verfügen über ein Neutrik® powerCON® Kabel für die Serienschaltung. Wird eine andere Art von Stecker benötigt, ziehen Sie die Tabelle weiter unten zu Rate

Wechselstromstecker

DMX-Verbindung

De Ovation GR-1 Adapter kann mit einem DMX-Controller betrieben werden, wenn eine 5-polige DMX-Datenverbindung zum Einsatz kommt. Sie können sich eine Einführung in DMX unter

Master/Slave-Schaltung

Der Ovation GR-1 Adapter verwendet für seinen Master/Slave-Modus eine DMX-Datenverbindung. Im Master/Slave­Modus lassen sich mit einem einzigen Ovation GR-1 Adapter (das Master-Gerät) die Funktionen eines oder mehrerer Ovation GR-1 Adapter-Geräte (die Slave-Geräte) ansteuern, ohne einen DMX-Controller verwenden zu müssen. Ein Ovation GR-1 Adapter wird zum Master-Gerät, wenn er im Gobo-Rotator-Modus ausgeführt wird. Sie müssen das Bedienfeld jedes einzelnen Slave-Geräts konfigurieren, um das jeweilige Gerät im Slave-Modus zu betreiben. Während des Betriebs im Master/Slave-Modus arbeiten die Slave-Geräte im Takt des Master-Geräts.

RDM (Remote Device Management)

Remote Device Management bzw. RDM ist ein Standard, mit dem DMX-aktivierte Geräte bidirektional entlang bestehender DMX-Kabel kommunizieren können. Der STRIKE Saber unterstützt das RDM-Protokoll, über das Feedback zur Überwachung der Änderungen der Menüoptionen gegeben wird. Laden Sie für weiterführende Informationen unter
www.chauvetprofessional.com das Benutzerhandbuch herunter.
.
Anschluss Draht (USA) Draht (Europa Schraubenfarbe
Stromführender AC-Leiter Schwarz Braun Gelb/Messingfarben
AC-Neutralleiter Weiß Blau Silber
AC-Erdungsleiter Grün/Gelb Grün/Gelb Grün
Um Verschleiß zu vermeiden und die Lebensdauer des Geräts zu verlängern, trennen Sie während längerer Perioden des Nichtgebrauchs das Gerät vom Stromnetz – entweder per Trennschalter oder durch Herausziehen des Steckers aus der Steckdose.
www.chauvetprofessional.com herunterladen.
13
Ovation GR-1 Adapter SAL Rev. 1
Page 15
SCHNELLANLEITUNG
Ovation GR-1 IP
Befestigungsschelle
Schrauben Sie die Befestigungsklemme vom Ovation GR-1 Adapter ab
Befestigen Sie den Ovation GR-1 Adapter am Befestigungsbügel des Geräts
Schließen Sie das Stromkabel vom Gerät am Ovation GR-1 Adapter und das Strom-/ Datenkabel am Ovation GR-1 Adapter an
Schalten Sie das Gerät ein und richten Sie den Ovation GR-1 Adapter je nach Bedarf ein

Montage

Lesen Sie vor der Montage dieses Geräts die Sicherheitshinweise. Mindestens einen Befestigungspunkt pro Gerät verwenden. Stellen Sie sicher, dass die Befestigungsklemmen dafür ausgelegt sind, das Produktgewicht tragen zu können.

Ansicht Gerätemontage

DE

Descripción del Panel de Control

Tas te Funktion
<MENU> Damit verlassen Sie das aktuelle Menü oder die Funktion.
<ENTER>
<UP>
<DOWN>
Damit wird das aktuell angezeigte Menü aktiviert oder der aktuell ausgewählte Wert einer Funktion eingestellt
Damit navigieren Sie sich durch die Menüpunkte nach oben und erhöhen den numerischen Wert der entsprechenden Funktion.
Damit navigieren Sie sich durch die Menüpunkte nach unten und verringern den numerischen Wert der entsprechenden Funktion.
Ovation GR-1 Adapter SAL Rev. 1
14
Page 16
SCHNELLANLEITUNG
DE

Menüstruktur

Hauptebene Programmierebenen Beschreibung
DMX Address 001-512 Wählt die DMX-Adresse aus Gobo Rotator 000-255
Master/Slave
Back Light
Information
Reset Factory
Fixture Hours <_ _ _ _H>
Version <V_._> Zeigt die aktuelle Firmware-Version an
UID <_ _ _ _ _ _ _ _ _ _ _ _> Zeigt die Geräte-UID an
Master DMX-Modus (Master)
Slave Slave-Modus
On Hintergrundbeleuchtung immer an
10S
20S
30S
No
Yes
Index/Geschwindigkeit der Gobo­Rotation
Damit wird die Hintergrundbeleuchtung der Anzeige nach 10 Sekunden Inaktivität ausgeschaltet
Damit wird die Hintergrundbeleuchtung der Anzeige nach 20 Sekunden Inaktivität ausgeschaltet
Damit wird die Hintergrundbeleuchtung der Anzeige nach 30 Sekunden Inaktivität ausgeschaltet
Zeigt an, wie lange das Gerät eingeschaltet gewesen ist
Damit stellen Sie das Gerät auf die Werkseinstellungen zurück

DMX-Werte

Kanal Funktion Wert Prozent/Einstellung
1 Gobo Rotator
000 127 128 190 191 192 193 255
Index Im Uhrzeigersinn, von schnell nach langsam Anhalten Entgegen dem Uhrzeigersinn, von langsam nach schnell
15
Ovation GR-1 Adapter SAL Rev. 1
Page 17
BEKNOPTE HANDLEIDING
NL

Over deze handleiding

De Ovation GR-1 Adapter Beknopte Handleiding (BH) bevat basisinformatie over het product, zoals aansluiting, montage, menu-opties en DMX-waarden. Download de gebruikershandleiding op www.chauvetprofessional.com voor meer informatie.

Disclaimer

De informatie en specificaties in deze BH kunnen zonder voorafgaande kennisgeving worden gewijzigd.

BEPERKTE GARANTIE

GA NAAR ONZE WEBSITE VOOR REGISTRATIE VAN DE GARANTIE EN DE VOLLEDIGE ALGEMENE VOORWAARDEN.
Voor klanten in de Verenigde Staten en Mexico: www.chauvetlighting.com/warranty-registration Voor klanten in het Verenigd Koninkrijk, Ierland, België, Nederland, Luxemburg, Frankrijk en Duitsland:
www.chauvetlighting.eu/warranty-registration/
Chauvet garandeert dat dit product bij normaal gebruik vrij zal blijven van defecten in materiaal en vakmanschap, voor de opgegeven periode en onder voorbehoud van de uitzonderingen en beperkingen die zijn uiteengezet in de volledige beperkte garantie op onze website. Deze garantie geldt uitsluitend voor de oorspronkelijke koper van het product en is niet overdraagbaar. Om onder deze garantie rechten uit te oefenen, moet u een aankoopbewijs overleggen in de vorm van een origineel verkoopbewijs van een geautoriseerde dealer, waarop de naam van het product en de aankoopdatum zichtbaar zijn. ER ZIJN GEEN ANDERE EXPLICIETE OF IMPLICIETE GARANTIES. Deze garantie geeft u specifieke wettelijke rechten. Mogelijk heeft u ook andere rechten die van staat tot staat en van land tot land verschillen. Deze garantie is uitsluitend geldig in de Verenigde Staten, het Verenigd Koninkrijk, Ierland, België, Nederland, Luxemburg, Frankrijk, Duitsland en Mexico. Neem contact op met uw lokale verkoper voor garantievoorwaarden in andere landen.

Veiligheids instructies

Open het product NIET. Het bevat geen te onderhouden onderdelen.
Om onnodige slijtage te elimineren en zijn levensduur te verlengen, gedurende perioden wanneer het product niet wordt gebruikt, moet u het product van de stroom afsluiten door een aardlekschakelaar om te zetten of door het te ontkoppelen.
Monteer dit product op een plek met voldoende ventilatie, ten minste 50 cm van de aangrenzende oppervlakken.
Plaats geen ontvlambaar materiaal binnen 50 cm van dit product als het in gebruik is of is aangesloten op het stopcontact.
LET OP: Bij het verplaatsen van het product uit extreme omgevingen, (bijv. koude vrachtwagen naar warme, vochtige balzaal) kan er condensvorming optreden op de elektronica van het product. Om storingen te vermijden moet het product volledig kunnen acclimatiseren aan de omgeving voordat het op stroom wordt aangesloten.
GEBRUIK een veiligheidskabel bij het boven het hoofd plaatsen van dit product.
Gebruik dit product NIET buitenshuis of op een locatie waar stof, grote warmte, water of vochtigheid het kunnen beïnvloeden. (IP20)
Gebruik dit product NIET als de behuizing, lenzen of kabels beschadigd lijken.
Sluit dit product NIET aan op een dimmer of een regelweerstand.
Sluit dit product UITSLUITEND op een geaard en beveiligd stroomcircuit.
Stop in het geval van ernstige operationele problemen onmiddellijk met het gebruik.
De maximale omgevingstemperatuur bedraagt 45 °C. Gebruik dit product niet bij hogere temperaturen.

Contact

Van buiten de VS, Verenigd Koninkrijk, Ierland, Benelux, Frankrijk, Duitsland of Mexico kunt u contact opnemen met de distributeur of om ondersteuning vragen dan wel het product retourneren. Ga naar

Wat is inbegrepen

Ovation GR-1 Adapter
Neutrik® powerCON® powerlinking-snoer
Beknopte handleiding

AC-stroom

Dit product heeft een voeding met automatisch bereik die werkt met een ingangsspanning van 100–240 VAC, 50/60 Hz.

Kabel

De Ovation GR-1 Adapter wordt geleverd met een Neutrik® powerCON® powerlinking-kabel. Gebruik de onderstaande tabel als er een ander soort stekker nodig is.
Contact Us oor contactinformatie.
Ovation GR-1 Adapter QRG Rev. 1
16
Page 18
BEKNOPTE HANDLEIDING
!
Ovation GR-1 IP
Montageklem
Schroef de montageklem van de Ovation GR-1 Adapter los
Bevestig de Ovation GR-1 Adapter aan de beugel van de armatuur
Sluit de voedingskabel van de armatuur aan op de Ovation GR-1 Adapter en de voedings-/ gegevenskabel op de Ovation GR-1 IP.
Schakel de armatuur in en stel de OOvation GR-1 Adapter naar wens in
NL

AC-stekker

Aansluiting Snoer (VS) Snoer (Europa) Schroefkleur
AC Live Zwart Bruin Geel/messing
AC Neutraal Wit Blauw Zilver
AC Aarde Groen/geel Groen/geel Groen
Om onnodige slijtage te elimineren en zijn levensduur te verlengen, gedurende perioden wanneer het product niet wordt gebruikt, moet u het product van de stroom afsluiten door een aardlekschakelaar om te zetten of door het te ontkoppelen.

DMX-koppeling

De Ovation GR-1 Adapter kan met een DMX-controller werken met een normale DMX seriële verbinding. Op
www.chauvetprofessional.com. is een DMX basishandleiding verkrijgbaar.

Master/slave-verbinding

De Ovation GR-1 Adapter maakt gebruik van de DMX-gegevensverbinding voor haar Master-/Slave-modus. De Master/ Slave-modus zorgt ervoor dat een Ovation GR-1 Adapter (de “master”) de acties regelt van een of meer Ovation GR-1 Adapter-producten (de “slaves”) zonder een DMX-regelaar. Een Ovation GR-1 Adapter wordt de master wanneer de Gobo Rotator-modus gebruikt wordt. U moet het bedieningspaneel van elke slave configureren om in Slave-modus te werken. Tijdens het gebruik van Master/Slave zullen de slaves in harmonie met de master werken.

RDM (apparaatbehe er op afstand)

Remote Device Management of RDM (apparaatbeheer op afstand) is een standaard die het voor DMX-apparaten mogelijk maakt om in twee richtingen te communiceren over bestaande DMX-kabels. De Ovation GR-1 Adapter ondersteunt het RDM-protocol dat zorgt feedback toelaat bij de bewaking van wijzigingen aan de menu map-opties van. Download de gebruikershandleiding op

Montage

Lees alvorens dit product te monteren alle Veiligheids instructies. Controleer of de montageklem het gewicht van het product kan dragen.

Montagediagram van het product

www.chauvetprofessional.com voor meer informatie.
17
Ovation GR-1 Adapter QRG Rev. 1
Page 19
BEKNOPTE HANDLEIDING

Beschrijving bedienings paneel

Toets Functie
<MENU> Sluit het huidige menu of functie af
<ENTER>
<UP>
<DOWN>
Activeert het huidige getoonde menu of plaatst de huidige geselecteerde waarde in de geselecteerde functie
Navigeert omhoog via het menu of verhoogt de numerieke waarde wanneer in een functie
Navigeert omlaag via het menu of verlaagt de numerieke waarde wanneer in een functie

Menumap

Hoofdniveau Programmeerniveaus Beschrijving
DMX Address 001-512 Selecteert het DMX-startadres Gobo Rotator 000-255 Index/Speed of gobo rotation
Master/Slave
Back Light
Information
Reset Factory
Fixture Hours <_ _ _ _H> Toont het totale aantal producturen
Version <V_._> Toont de geïnstalleerde softwareversie
UID <_ _ _ _ _ _ _ _ _ _ _ _> Geeft de huidige UID
Master DMX-modus
Slave Master/Slave-modus
On
10S
20S
30S
No
Yes
De backlight van de display is altijd aan
Schakelt de backlight van de display uit na 10s van inactiviteit
Schakelt de backlight van de display uit na 20s van inactiviteit
Schakelt de backlight van de display uit na 30s van inactiviteit
Herstellen naar de fabrieksstandaard
NL

DMX-waarden

Kanaal Functie Waarde Percentage/instelling
1 Gobo roterend
000 127 128 190 191 192 193 255
Roterende gobo index Roteren met de klok mee, langzaam tot snel Stop Tegen de klok in roteren, langzaam tot snel
Ovation GR-1 Adapter QRG Rev. 1
18
Page 20
Multi-Language

Contact Us

Chauvet World Headquarters
Chauvet Europe Ltd
Chauvet Europe BVBA
Chauvet France
Chauvet Germany
Chauvet Mexico
General Information Technical Support
Address: 5200 NW 108th Ave. Voice: (844) 393-7575
Sunrise, FL 33351 Fax: (954) 756-8015
Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com
Fax: (954) 929-5560
Toll Free: (800) 762-1084 Website: www.chauvetprofessional.com
Address: Unit 1C Email: UKtech@chauvetlighting.eu
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK Website: www.chauvetprofessional.eu
NG16 6NT
Voice: +44 (0) 17 73 511115
Fax: +44 (0) 1773 511110
Address: Stokstraat 18 Email: BNLtech@chauvetlighting.eu
9770 Kruishoutem
Belgium Website: www.chauvetprofessional.eu
Voice: +32 9 388 93 97
Address: 3, Rue Ampère
91380 Chilly-Mazarin
France Website: www.chauvetprofessional.eu
Voice: +33 1 78 85 33 59
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany Website: www.chauvetprofessional.eu
Voice: +49 421 62 60 20
Address: Av. de las Partidas 34 - 3B
(Entrance by Calle 2)
Zona Industrial Lerma Website: www.chauvetprofessional.mx
Lerma, Edo. de México, CP 52000
Voice: +52 (728) 690-2010
Email: FRtech@chauvetlighting.fr
Email: DEtech@chauvetlighting.de
Email: servicio@chauvet.com.mx
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record.
19
Ovation GR-1 Adapter QRG Rev. 1
Loading...