Chauvet Pro Nexus 4x4 Package Quick Start Guide
Quick Reference Guide
English EN
Español ES
Français FR
Nederlands NL
Nexus™ 4x4 QRG EN
About this
The Nexus™ 4x4 Quick Reference Guide (QRG) has basic product
and DMX
Disclaimer
The information and specifications contained in this QRG are subject to
Safety Notes
• DO NOT open this product. It contains no user-serviceable parts.
environments, (e.g. cold truck to warm humid ballroom) condensation
DO NOT operate this product outdoors or in any location where dust,
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact
your distributor to request support or return a product. Visit
What Is
• Nexus™ 4x4
• #5 Allen key with handle
• Warranty card
Guide
information such as connection, mounting, menu options,
values. Download the User Manual from www.chauvetprofessional.com
for more details.
change without notice.
• DO NOT look at the light source when the product is on.
• To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power via
breaker or by unplugging it.
• CAUTION: When transferring product from extreme temperature
may form on the internal electronics of the product. To avoid causing
a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
• CAUTION: This product’s housing may be hot when lights are
operating.
• Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
• DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
• USE a safety cable when mounting this product overhead.
• DO NOT hang product using only the coffin locks.
•
excessive heat, water, or humidity may affect it.
• DO NOT operate this product if the housing, lenses, or cables appear
damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket to carry this product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperat ure is 104 °F ( 40 °C). Do not operate
this product at higher temperatures.
www.chauvetprofessional.com for contact information.
2
Included
• Neutrik® powerCON® power cord
• Quick Reference Guide
Nexus™ 4x4 QRG EN
AC Power
This product has an auto-ranging power supply that can work with an input
To eliminate unnecessary wear and improve its lifespan, during periods of nonuse completely disconnect the product from power via breaker or by unplugging
Power Linking
The Nexus™ 4x4 supports power linking in the quantities listed below. Do
Power Linking
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
replace with a good fuse of the same type and
Other Products
voltage range of 100–240 VAC, 50/60 Hz.
it.
not link more than:
• 4 products at 120 V,
• 7 products at 208 V, or
• 8 products at 230 V.
Power linking cords can be purchased separately.
Diagram
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and
rating.
4. Screw the fuse hold er cap back in place.
5. Reconnect the pro duc t to power.
3
Nexus™ 4x4 QRG EN
DMX Linking
The Nexus™ 4x4 works in Master/Slave mode or with a DMX
. A DMX Primer is available from
DMX Linking
DMX
The Nexus™ 4x4 has 5 DMX personalities: 3-, 5-, 9-, 48-,
in this
website at
Master/Slave
Mode
The Nexus™ 4x4 works in Master/Slave mode. For more
Ethernet
Ethernet connections link Nexus™ 4x4 panels to routers and each other
etherCON® ports. Ethernet connections are for
.
, and
DMX Controller or Master
Other
DMX Products
controller using its DMX ports
www.chauvetprofessional.com.
Diagram
Personalities
Connections
and 53-channel. For more information, see the DMX Values
QRG, or the User Manual on the Chauvet
http://www.chauvetlighting.com/product-manuals-literature/.
information, see the User Manual on the Chauvet website.
through their Neutrik®
running TCP/IP-based control system, such as Kling-Net an d Art-Net™
All Neutrik® etherCON® ports can be either input or output ports
panels can be lin ked to each other, but the start of each chain of panels
must be a router port.
4
Nexus™ 4x4 QRG EN
Ethernet
Connections
Kling-Net Mode
Kling-Net is a network protocol that uses TCP/IP to send DMX
over a network and into the Neutrik® etherCON® connection ports
Net works seamlessly with
for configuring and mapping
display devices. For more information, see the User Manual on the
Art-Net™ Mode
Art-Net™ is an Ethernet protocol that uses TCP/IP to send DMX
etherCON® connection
Net™ requires configuration
in
website at
.
Reset To
Factory
NOTE: Do not use the router WAN port!
Router
Computer or Controller
Net
Nexus™ 4x4
Panels
More
Nexus™ 4x4 Panels
Diagram
Running TCP/IP-based
protocol, such as Kling-
or Art-Net™
of the Nexus™ 4x4 panels. KlingKling-Net-supported ArKaos software
Chauvet website at http://www.chauvetlighting.com/product-manuals-
literature/.
signals over a network and into the Neutrik®
ports of the Nexus™ 4x4 panels. Artthrough the control panel. For more information, see the Menu Map
this QRG or the User Manual on the Chauvet
http://www.chauvetlighting.com/product-manuals-literature/.
An Art-Net™ Primer is available from www.chauvetprofessional.com
Art-Net™ is designed and copyrighted by Artistic Licence Holdings Ltd.
Nexus™ 4x4 panels do not work with Art-Net™ controllers sending in
Broadcast mode. For infor mation about the co ntroller’ s mode, s ee the
controller’s User Manual.
1. Disconnect the Nexus™ 4x4 from power.
2. Press and hold <MENU> and <ENTER> simultaneously.
Defaults
3. Reconnect the Nexus™ 4x4 to power.
4. Release <MENU> and <ENTER>. The words Factory reset?
ENTER = Confirm show on the display.
5
5. Press <ENTER>.
Nexus™ 4x4 QRG EN
Kling-Net
Kling-Net Mapper is part of the ArKaos so ftware package. It in forms the
products in a
ns for mapping the
Part 1: Confirm
Network
The Connected
Devices
It can take up to 20 seconds for all the products to populate the list and the
Colors and Activity
Explanation
mapped.
Green with an ID number and IP
address
There is connectivity and everything is
working properly, and the device is mapped.
Part 2: Test
Network
Mapper
ArKaos software about the layout of the Nexus™ 4x4
process called mapping.
The following section provides step-by-step instructio
Nexus™ 4x4 products.
1. Connect the ArKaos computer and Nexus™ 4x4s to the same
network. See Ethernet Connections Diagram.
Connectivity
2. Set all the Nexus™ 4x4s to Kling-Net operating mode.
3. Open the ArKaos Kling-Net Mapper. All the Kling-Net devices
populate a list on the left side of the screen in the Connected Devices
window.
color of the device’s listing provides information about its status.
Window
Black with an ID number and IP
address
Black to red with no IP addr ess
during initial population
Black to red after initial population The connectivity has been lost.
1. Select the Output dropdown icon from the tool bar at the top of the
Kling-Net Mapper screen. One of th e options will be Test Pattern .
Connectivity
2. Select Test Pattern. The image to the right of the icon is a small
screen, indicating that Test Pattern is the current mode.
3. Select the icon to the right of the Output dropdown icon. One of the
options will be Flashing Output Selection.
4. Select Flashing Output Selection. The icon is a faded green square
with an arrow, indicating that a flashing green light is the current test
pattern.
5. Left click once on an LED display product. The product flashes
green.
6. Repeat Step 4 for every product in the list.
There is connectivity and everything is
working properly, but the device is not yet
The King-Net™ Mapper could not find an IP
address for the device, most likely because
the system is using an Ethernet switch
instead of an Ethernet hub.
6
Nexus™ 4x4 QRG EN
Part 3: Map The
Products For
Mounting
The Nexus™ 4x4 can be mounted in almost any orientation provided each
individual product is secured through the mounting bracket. The coffin
1. Make sure the Nexus™ Aw 4x4 products are all listed in the
Connected Devices window and have flashed when tested. For more
ArKaos
information, see Part 1: Confirm Network Connectivity.
2. Click on the first product in the list and drag it onto the mapping
image in the center of th e s cr een. A shape representing th e display
product shows on the mapping image. The product displays the
pattern on the mapping image.
3. Drag, rotate, and resize the shape on the mapping image until it is in
the position nee de d f or the pre s e ntation lay out.
4. Repeat Steps 2 thru 3 for every Nexus™ Aw 4x4 product.
5. Complete Parts 1 and 2.
6. Click on File in the ArKaos Media Mapper.
7. Click on Save As.
8. Save the file.
Remember the location of t he file bec ause t he file must be loa ded into
the ArKaos software.
locks are for product alignment only and are not weight bearing. DO NOT
hang product using only the coffin locks.
Product
Mounting
Diagram
7
Nexus™ 4x4 QRG EN
Control Panel
Button
Function
<MENU>
Scrolls through the main menu options or exits the current menu option.
<ENTER>
Enters into the hig hlig hted menu opt ion or sets the curre nt ly se le cted va lue.
<UP>
Navigates up through a list of menu options or values.
<DOWN>
Navigates down throu gh a list of menu options or values.
Home Screen
The home screen on the control panel display shows the current operating state
Exiting Auto
And
Auto Show and Static modes are not exited automatically when another
Setting changes are not activated until the control panel display
Main Level
Programming Levels
Description
Auto 1–12
Selects an auto program and its speed
Fade
Selects color fade and its speed
G B GB
RB
RG
RGB
R
B
Off
Dimmer 1–3
On
10S
20S
Description
as follows:
• <Master> if the Nexus™ 4x4 is in Standa lone or Mas ter mode
• <Slave> if the Nexus™ 4x4 is in Art-Net™, Kling-Net, or DM X m ode
Show
Static Modes
Menu Map
Auto Show
Static
mode is selected. To exit Auto Show or Static mode, do the following:
1. Go to the Master/Slave main level.
2. Select Slave.
3. Press <ENTER>.
4. Press <MENU> for 10 seconds.
returns to the home scree n. To retu rn t he co ntrol pa nel dis pla y to the
home screen press and hold <MENU> for 10 secs.
Show Speed
000–100
R
Fixture Color
Manual Color
000–255
G
Selects a preset color
Sets color levels for manual color mixing
Dimmer Mode
Back Lite
8
30S
Sets dimming curve
Sets control panel backlight time
Nexus™ 4x4 QRG EN
Main Level
Programming Levels
Description
Fixture Hours
Shows total operating ho urs
Version
Shows software version
IP Address
Shows IP address
Device ID
Shows ID number
DMX Address
001–512
Sets DMX start channel for DMX mode
3Ch
5Ch
9Ch
48Ch
53Ch
Master
Sets Master mode
Slave
Sets Slave mode
R
G
B
High
Sets fan to run continuously at high speed
Temperature
Shows the product’s internal temperature
Kling-Net
Sets Kling-Net protocol
Manual
Sets product to use a manually set IP address
DHCP
Sets product to use dynamic IP addressing
Static
Sets product to use its internal IP address
Net
000–127
Sets the net address of the product
Subnet
Sets the subnet of the product
Universe
Sets the universe of the product
Info
DMX Channel
Master/Slave
White
Fan Speed
Ethernet Settings Protocol
Auto
Art-Net
125–255
IP Mode
Sets DMX personality for DMX, Art-Net™
mode, and Kling-Net modes
Sets the color mix that will be white
Sets fan to slow down when product is cool
00–15
9
Nexus™ 4x4 QRG EN
53Ch
Channel
Function
Value
Percent/Setting
Red 1
0–100%
activated
Green 1
0–100%
When values 011–020 in CH. 53 are
3
Blue 1
000 ó 255
0–100%
Red 2
0–100%
011–020
activated
Green 2
0–100%
6
Blue 2
000 ó 255
0–100%
Red 3
0–100%
When values 011–020 in CH. 53 are
activated
Green 3
0–100%
When values 011–020 in CH. 53 are
activated
9
Blue 3
000 ó 255
0–100%
Red 4
0–100%
When values 011–020 in CH. 53 are
activated
When values 011–020 in CH. 53 are
activated
12
Blue 4
000 ó 255
0–100%
Red 5
0–100%
When values 011–020 in CH. 53 are
Green 5
0–100%
When values 011–020 in CH. 53 are
activated
15
Blue 5
000 ó 255
0–100%
Red 6
0–100%
When values 011–020 in CH. 53 are
Green 6
0–100%
When values 011–020 in CH. 53 are
activated
18
Blue 6
000 ó 255
0–100%
Red 7
0–100%
DMX Values
1
2
4
5
7
8
10
11
13
Warm White 1
Cool White 1
Warm White 2
Cool White 2
Warm White 3
Cool White 3
Warm White 4
Green 4
Cool White 4
Warm White 5
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
When values 011–020 in CH. 53 are
activated
When values
When values 011–020 in CH. 53 are
activated
0–100%
activated
in CH. 53 are
10
14
16
17
19
Cool White 5
Warm White 6
Cool White 6
Warm White 7
000 ó 255
000 ó 255
000 ó 255
000 ó 255
activated
When values 011–020 in CH. 53 are
activated
Nexus™ 4x4 QRG EN
53Ch
Channel
Function
Value
Percent/Setting
Green 7
0–100%
When values 011–020 in CH. 53 are
activated
21
Blue 7
000 ó 255
0–100%
Red 8
0–100%
When values 011–020 in CH. 53 are
Green 8
0–100%
When values 011–020 in CH. 53 are
activated
24
Blue 8
000 ó 255
0–100%
Red 9
0–100%
Green 9
0–100%
When values 011–020 in CH. 53 are
27
Blue 9
000 ó 255
0–100%
Red 10
0–100%
activated
Green 10
0–100%
30
Blue 10
000 ó 255
0–100%
Red 11
0–100%
When values 011–020 in CH. 53 are
activated
Green 11
0–100%
activated
33
Blue 11
000 ó 255
0–100%
Red 12
0–100%
When values 011–020 in CH. 53 are
activated
Green 12
0–100%
When values 011–020 in CH. 53 are
activated
36
Blue 12
000 ó 255
0–100%
Red 13
0–100%
When values 011–020 in CH. 53 are
activated
When values 011–020 in CH. 53 are
activated
39
Blue 13
000 ó 255
0–100%
Red 14
0–100%
When values 011–020 in CH. 53 are
20
22
23
25
26
28
29
31
32
Cool White 7
Warm White 8
Cool White 8
Warm White 9
Cool White 9
Warm White 10
Cool White 10
Warm White 11
Cool White 11
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
activated
When values 011–020 in CH. 53 are
activated
activated
When values 011–020 in CH. 53 are
When values 011–020 in CH. 53 are
activated
When values 011–020 in CH. 53 are
11
34
35
37
38
40
Warm White 12
Cool White 12
Warm White 13
Green 13
Cool White 13
Warm White 14
000 ó 255
000 ó 255
000 ó 255
0–100%
000 ó 255
000 ó 255
activated
Nexus™ 4x4 QRG EN
53Ch
Channel
Function
Value
Percent/Setting
Green 14
0–100%
When values 011–020 in CH. 53 are
activated
42
Blue 14
000 ó 255
0–100%
Red 15
0–100%
When values 011–020 in CH. 53 are
Green 15
0–100%
When values 011–020 in CH. 53 are
activated
45
Blue 15
000 ó 255
0–100%
Red 16
0–100%
Green 16
0–100%
When values 011–020 in CH. 53 are
48
Blue 16
000 ó 255
0–100%
000 ó 010
231 ó 255
No function
Auto 12
50
Auto Speed
000 ó 255
When CH. 49 has Auto 01–12 activated
000 ó 010
011 ó 255
No function
0–20 Hz
000 ó 010
204 ó 255
Preset dimmer speed from display menu
Nonlinear dimming curve 3 (slowest)
41
Cool White 14
43
Warm White 15
44
Cool White 15
46
Warm White 16
47
Cool White 16
49 Auto Programs
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 255
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 190
191 ó 210
211 ó 230
activated
When values 011–020 in CH. 53 are
activated
activated
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Auto 11
51 Dimmer
52 Strobe
53 Dimmer Speed
12
000 ó 255 0–100%
011 ó 020
021 ó 030
031 ó 051
052 ó 101
102 ó 152
153 ó 203
WW/CW Mode On (hold for 5 sec.)
WW/CW Mode Off (hold for 5 sec.)
No function
Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nexus™ 4x4 QRG EN
48Ch
Channel
Function
Value
Percent/Setting
1
Red 1
000 ó 255
0–100%
2
Green 1
000 ó 255
0–100%
3
Blue 1
000 ó 255
0–100%
4
Red 2
000 ó 255
0–100%
5
Green 2
000 ó 255
0–100%
6
Blue 2
000 ó 255
0–100%
7
Red 3
000 ó 255
0–100%
8
Green 3
000 ó 255
0–100%
9
Blue 3
000 ó 255
0–100%
10
Red 4
000 ó 255
0–100%
11
Green 4
000 ó 255
0–100%
13
Red 5
000 ó 255
0–100%
14
Green 5
000 ó 255
0–100%
15
Blue 5
000 ó 255
0–100%
16
Red 6
000 ó 255
0–100%
17
Green 6
000 ó 255
0–100%
18
Blue 6
000 ó 255
0–100%
19
Red 7
000 ó 255
0–100%
20
Green 7
000 ó 255
0–100%
21
Blue 7
000 ó 255
0–100%
22
Red 8
000 ó 255
0–100%
24
Blue 8
000 ó 255
0–100%
25
Red 9
000 ó 255
0–100%
26
Green 9
000 ó 255
0–100%
27
Blue 9
000 ó 255
0–100%
28
Red 10
000 ó 255
0–100%
29
Green 10
000 ó 255
0–100%
30
Blue 10
000 ó 255
0–100%
31
Red 11
000 ó 255
0–100%
32
Green 11
000 ó 255
0–100%
33
Blue 11
000 ó 255
0–100%
35
Green 12
000 ó 255
0–100%
36
Blue 12
000 ó 255
0–100%
37
Red 13
000 ó 255
0–100%
38
Green 13
000 ó 255
0–100%
39
Blue 13
000 ó 255
0–100%
40
Red 14
000 ó 255
0–100%
41
Green 14
000 ó 255
0–100%
42
Blue 14
000 ó 255
0–100%
43
Red 15
000 ó 255
0–100%
44
Green 15
000 ó 255
0–100%
45
Blue 15
000 ó 255
0–100%
12 Blue 4
23 Green 8
34 Red 12
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
13
Nexus™ 4x4 QRG EN
48Ch
Channel
Function
Value
Percent/Setting
46
Red 16
000 ó 255
0–100%
47
Green 16
000 ó 255
0–100%
48
Blue 16
000 ó 255
0–100%
9Ch
Channel
Function
Value
Percent/Setting
1
Dimmer
000 ó 255
0–100%
Red
0–100%
When values 011–020 in CH. 9 are
activated
Green
0–100%
When values 011–020 in CH. 9 are
activated
4
Blue
000 ó 255
0–100%
011 ó 255
0–20 Hz
251 ó 255
White 11
1 2 3 4 5
6 7 8 9 10
11
12
14
15
16
13
Pixel Layout for 48- and 53-Channel Modes
2
Warm White
3
Cool White 1
5 Strobe
Color Macro +
6
White Balance
000 ó 255
000 ó 255
000 ó 010
000 ó 010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 200
201 ó 205
206 ó 210
211 ó 215
216 ó 220
221 ó 225
226 ó 230
231 ó 235
236 ó 240
241 ó 245
246 ó 250
No function
No function
R: 100% G: 0–100% B: 0
R: 100%–0 G: 100% B: 0
R: 0 G: 100% B: 0–100%
R: 0 G: 100%–0 B: 100%
R: 0–100% G: 0 B: 100%
R: 100% G: 0 B: 100%–0
R: 100% G: 0–100% B: 0–100%
R: 100%–0 G: 100%–0 B: 100%
R: 100% G: 100% B: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10
14
Nexus™ 4x4 QRG EN
9Ch
Channel
Function
Value
Percent/Setting
231 ó 255
Auto 12
8
Auto Speed
000 ó 255
When CH. 7 has Auto 01–12 activated
204 ó 255
Nonlinear dimming curve 3 (slowest)
5Ch
Channel
Function
Value
Percent/Setting
1
Dimmer
000 ó 255
0–100%
2
Red
000 ó 255
0–100%
3
Green
000 ó 255
0–100%
4
Blue
000 ó 255
0–100%
000 ó 010
No function
3Ch
Channel
Function
Value
Percent/Setting
1
Red
000 ó 255
0–100%
2
Green
000 ó 255
0–100%
3
Blue
000 ó 255
0–100%
7 Auto Programs
9 Dimmer Speed
000 ó 010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 190
191 ó 210
211 ó 230
000 ó 010
011 ó 020
021 ó 030
031 ó 051
052 ó 101
102 ó 152
153 ó 203
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Auto 11
Preset dimmer speed from display menu
WW/CW Mode On (hold for 5 sec.)
WW/CW Mode Off (hold for 5 sec.)
No function
Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
5 Strobe
011 ó 255
0–20 Hz
15
Nexus™ 4x4 GRR ES
Acerca de
La Guía de Referencia Rápida (GRR) del Nexus™ 4x4 contiene
información básica sobre el producto, como conexión, montaje, opciones
suario de
Exención de
Responsabilidad
La información y especificaci on es co nt enid as en est a GRR están suj etas a
Notas de
• NO abra este producto. No contiene piezas reparables por el usuario.
Contacto
Fuera de EE.UU, Reino Unido, Irlanda, México o Benelux, póngase en
contacto con su distribuidor para solicitar asistencia o devolver el
para información de
esta Guía
Seguridad
de menú y valores DMX. Descargue el Manual de U
www.chauvetprofessional.com para información más detallada.
cambio sin previo aviso.
• NO mire a la fuente de luz cuando el producto esté encendido.
• Para evitar un desgaste innecesario y alargar su vida útil, desconecte
complemente el producto de la alimentación, mediante el interruptor
o desenchufándolo, durante los periodos en los que no se use.
• Cuidado: cuando transfiera el producto desde ambientes con
temperatura extrema (p. ej ., del remolque frío de un camión a una
sala de baile con calor y hu medad), puede formarse condensación en
la electrónica inter na del producto. Para evitar que se produzca una
avería, deje que el producto se aclimate completamente al ambiente
antes de conectar la alimentación.
• CUIDADO: la carcasa de este producto puede estar caliente cuando
las luces están en funci onamiento.
• Monte este producto en una ubicación con ventilación adecuada,
al menos a 20'' (50 cm) de superficies adyacentes.
• NO deje ningún material inflamable a menos de 50 cm de este
producto mientras esté fu ncionando o conectado a la alimentación.
• USE un cable de seguridad cuando monte este producto en lo alto.
• NO cuelgue el producto usando solo los cierres de la caja.
• NO ponga en funcionamiento este producto en el exterior o en
cualquier ubicación en la que el polvo, calor excesivo , agua o
humedad puedan afectarlo.
• NO ponga en funcionamiento este producto si sospecha que la
carcasa, lentes o cables están dañados.
• NO conecte este producto a un atenuador o reostato.
• Conecte este producto SOLO a un circuito con toma de tierra y
protegido.
• Use SOLAMENTE los sopo rtes de colgar/montar para mover est e
producto
• En caso de un problema grave de funcionamiento, deje de usarlo
inmediatamente.
• La temperatura ambiente máxima es de 104 °F (40 °C). No haga
funcionar este producto a temperaturas más altas.
producto. Visite www.chauvetprofessional.com
contacto.
16
Nexus™ 4x4 GRR ES
Qué va
• Nexus™ 4x4
• Tarjeta de garantía
Corriente
Este producto tiene un a fuente de alimentación con detecci ón automática
tensión de entrada de 100~240 VCA,
Para evitar un desgaste innece sario y alargar su vida útil, desconecte
Incluido
Alterna
• Cable de alimentación Neutrik®
powerCON®
que puede funcionar con un rango de
50/60 Hz.
complemente el producto de la alimentación, mediante el inter r uptor o
desenchufándolo, durante los per iodos en los que no se use.
• Guía de Referencia
Rápida
• Llave Allen nº 5 con asa
17
Nexus™ 4x4 GRR ES
Alimentación en
El Nexus™ 4x4 admite alimentación en cadena en las cantidades
Diagrama de
Alimentación en
Enchufe CA
Conexión
Cable (EE.UU)
Cable (Europa)
Color del Tornillo
CA Cargado
Negro
Marrón
Amarillo/Bronce
CA Tierra
Verde/Amarillo
Verde/Amarillo
Verde
Sustitución del
Otros Productos
Cadena
especificadas más abajo. No enlace más de:
• 4 productos a 120 V,
• 7 productos a 208 V, o
• 8 productos a 230 V.
Los cables de alimentación en cadena se pueden adquirir por separado.
Cadena
CA Neutro Blanco Azul Plata
Fusible
1. Desconecte el producto de la toma de corriente.
2. Con un destornilla d or de punt a plane, desatorni l le la tapa de l
portafusibles.
3. Quite el fusible fundido del portafusibles y sustitúyalo con otro del
mismo tipo y categoría.
4. Vuelva a atornillar la tapa del portafusibles en su sitio.
5. conecte de nuevo la aliment ación.
18
Nexus™ 4x4 GRR ES
Enlace DMX
El Nexus™ 4x4 funciona en modo Maestro/Esclavo o con
Hay un Manual DMX
Diagrama de
Personalidades
El Nexus™ 4x4 tiene 5 personalidades DMX: de 3, 5, 9, 48 y 53 canales.
esta GRR o
Modo
Maestro/Esclavo
El Nexus™ 4x4 funciona en modo Maestro/Esclavo. Para más
Conexiones
Las conexiones Ethern et enlazan los paneles d el Nexus™ 4x4 a routers y
etherCON®. Las conexiones
el
. Todos los puertos
paneles se pueden enlazar entre sí, pero el inicio de cada cadena de
Controlador DMX o Maestro
Otros
Products DMX
controlador DMX utilizando sus puertos DMX.
disponible en www.chauvetprofessional.com.
Enlace DMX
DMX
Ethernet
Para más información, consulte Valores DMX en
el Manual de Usuario en el sitio web de Chauvet
http://www.chauvetlighting.com/product-manuals-literature/.
información, descargue el Manua l de Usuario de l sitio we b de Chauvet.
entre sí a través de sus puertos Neutrik®
Ethernet son para que funcione el sistema de control basado en
protocolo TCP/IP, como Kling-Net y Art-Net™
Neutrik® etherCON® pu eden ser tanto de entrada como de salida, y los
paneles tiene que ser el puerto de un router.
19
Nexus™ 4x4 GRR ES
Diagrama de
Conexiones
Modo Kling-Net
Kling-Net es un protocolo de red que utiliza TCP/IP para enviar
DMX a través de una red y a los puertos de conexión Neutrik®
Net funciona
perfectamente con el software ArKaos para configurar y mapear
Modo Art-Net™
Art-Net™ es un protocolo Ethernet que utiliza TCP/IP para enviar
señales DMX a través de una red y a los puertos de conexión
necesita configuración a través del panel de control. Para más
.
Net™ es propiedad de Artistic Licence
no funcionan con controladores
sobre el
Reiniciar a la
Configuración
NOTA: ¡No utilice el puerto WAN del router!
Router
Ordenador o controlador
Paneles de
Nexus™ 4x4
Más paneles de
Nexus™ 4x4
Ethernet
usando protocolo basado
en TCP/IP, como Kling-Net
o Art-Net™
etherCON® de los paneles del Nexus™ 4x4. Kling-
dispositivos de pantalla, para el que KlingNet tiene soporte. Para más
información, descargue el Manual de Usuario del sitio web de Chauvet
http://www.chauvetlighting.com/product-manuals-literature/.
Neutrik® etherCON® de los paneles del Nexus™ 4x4. Art-Net™
información, vea el Mapa de Menú en esta GRR o el M anual de Usuar io
en el sitio web de Chauvet http://www.chauvetlighting.com/product-
manuals-literature/.
Hay un Manual Art-Net™ disponible en www.chauvetprofessional.com
El diseño y copyright de ArtHoldings Ltd.
Los paneles del Nexus™ 4x4
Art-Net™ que envían en modo Broadcast. Para ver información
modo del controlador, consulte el Manua l de Usuario de l controlador.
1. Desconecte el Nexus™ 4x4 de la alimentación.
2. Pulse y mantenga pulsado <MENU> y <ENTER> simultáneamente.
de Fábrica
20
3. Conecte de nuevo el Nexus™ 4x4 a la alimentación.
4. Suelte <MENU> y <ENTER>. Las palabras Factory reset?
ENTER = Confirm aparecen en la pantalla.
5. Pulse <ENTER>.
Loading...