Chauvet Pro Maverick Mk 2 Spot Users Manual

Download

Page 1

User Manual

Page 2

Edition Notes

The Maverick MK2 Spot User Manual Rev. 9 covers the description, safety precautions,

Trademarks

CHAUVET, the Chauvet lo go and Maverick MK2 Spot are registere d trademark s or trademarks

in the United St ates and other countries. Other com pany and product names and lo gos referred to her ein may be tradem arks of their respective companies.

The works of authors hip contained in this manual, includi ng, but not limited to, all design, t ext

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes it s c us tomers to download and pr i nt th is manual for professional inf ormation purposes only. Chauv et expressly pr ohibits the usa ge, copy, storage, distribution , modification,

r its content for any other purpose without written consent from

Chauvet.

Document

Printing

For better results, pr int this docum ent in c olor, on lett er size pap er (8.5 x 11 i n), d ouble-sided. If

Intended

Any person in charge of ins talling, operatin g, and/or m aintaining this product s hould com pletely read through the guide tha t shipped with the product, as well as this manual, before install ing, operating, or maintaining this product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects.

e or disruption caused by any errors or omissions in this

document, whether such errors or omissions result from negligence, accident or any other

and does not commit to make, any such revisions.

Document

The Maverick MK2 Spot User Manual Rev. 9 supersedes all pr evious versions of this m anual. Discard any older versions of this manual and replace with this version. Go to www.chauvetprofessional.com for the latest version.

Audience

installation, programming, operation, and maintenance of the Maverick MK2 Spot. Chauvet released this edition of the Maverick MK2 Spot User Manual in 2018.

of Chauvet & Sons, LLC. (d/b/a Chauvet a nd Chauvet Lighting)

and images are owned by Chauvet.

or printing of this manual o

using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.

Revision

However, Chauvet assumes no responsibilit y and specifically disclaim s any and all liability to any party for any loss, damag

cause. Chauvet res erves the ri ght to re vise the c ontent of this docum ent without an y obligatio n to notify any per s on or c ompany of suc h re visi on, ho w ever, Chauvet has no ob li g atio n t o make,

Maverick MK2 Spot User Manual Rev. 9

Page 3

Table of Contents

1. Before You Begin ................................................................................................................................................... 1

What Is Included ....................................................................................................................................................................1

Claims .................................................................................................................................................................................................... 1

Manual Conventions .............................................................................................................................................................................. 1

Symbols ................................................................................................................................................................................................. 1

Product At A Glance ..............................................................................................................................................................1

Safety Notes ..........................................................................................................................................................................2

Personal Safety...................................................................................................................................................................................... 2

Mounting And Riggi ng ............................................................................................................................................................................ 2

Power And Wiring .................................................................................................................................................................................. 2

Operation ............................................................................................................................................................................................... 2

Expected LED Lifespan .........................................................................................................................................................2

2. Introduction ............................................................................................................................................................ 3

Description .............................................................................................................................................................................3

Features at a glance ..............................................................................................................................................................3

Overview ................................................................................................................................................................................3

Dimensions ............................................................................................................................................................................4

3. Setup ....................................................................................................................................................................... 5

AC Power ...............................................................................................................................................................................5

AC Plug.................................................................................................................................................................................................. 5

Fuse Replacement ................................................................................................................................................................................. 5

Mounting ................................................................................................................................................................................6

Orientation ............................................................................................................................................................................................. 6

Signal Connections ................................................................................................................................................................7

Art-Net™ Connection ............................................................................................................................................................................. 7

sACN Connection .................................................................................................................................................................................. 7

4. Operation ................................................................................................................................................................ 8

Touchscreen and Control Panel Description .........................................................................................................................8

Battery Powered Di splay ........................................................................................................................................................................ 8

Menu Map ..............................................................................................................................................................................8

Operating Settings Configuration .........................................................................................................................................12

Home Screen ....................................................................................................................................................................................... 12

Network Setup ..................................................................................................................................................................................... 12

Personality ........................................................................................................................................................................................... 14

Settings ................................................................................................................................................................................................ 14

Test Mode ............................................................................................................................................................................................ 19

System Informat ion .............................................................................................................................................................................. 19

Offset Mode .........................................................................................................................................................................20

DMX Values .........................................................................................................................................................................23

32CH ....................................................................................................................................................................................23

32CH ....................................................................................................................................................................................24

32CH ....................................................................................................................................................................................25

24CH ....................................................................................................................................................................................25

24CH ....................................................................................................................................................................................26

24CH ....................................................................................................................................................................................27

Color Wheel .........................................................................................................................................................................29

Gobo Designs ......................................................................................................................................................................29

Gobo Replacement .............................................................................................................................................................................. 30

Maverick MK2 Spot User Manual Rev. 9 -I-

Page 4

Table of Contents

5. Firmware Update .................................................................................................................................................. 31

6. Technical Information .......................................................................................................................................... 34

Product Maintenance ...........................................................................................................................................................34

Error Indication .....................................................................................................................................................................34

7. Technical Specificat i ons ..................................................................................................................................... 35

Photometrics Chart ..............................................................................................................................................................36

Returns ................................................................................................................................................................................37

Contact Us ................................................................................................................................................................ 38

-II- Maverick MK2 Spot User Manual Rev. 9

Page 5

1. BEFORE YOU BEGIN

What Is

• Maverick MK2 Spot

Claims

Carefully unpack the pr oduct immediately and check the box to make sure all the parts are in If the box or the contents (the product and included accessories) appear damaged from

. Failure to

addition, keep the b ox

For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Manual

Convention

Meaning

1–512

A range of values in the text

50/60

A set of mutually exclusive values in the text

<SET>

A button on the product’s control panel

Settings

A product function or a menu option

MENU>Settings

A sequence of menu options

A unique value to be entered or selected in a menu

Symbols

Meaning

Critical installation, configuration, or operation information. Failure to damage third-party equipment, or cause harm to the operator.

Important installation or configuration information. Failure to comply with this information may keep the product from working.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.

Product At A

Before You Begin

Included

Conventions

• True 1 compatible power cord

• 2 Omega brackets

• User Manual

the package and are in good condition. shipping or show signs of mishandling, notif y the carrier immediately, not Chauvet

report damage to the c arrier immediately may inval idate your claim. In and contents for inspection.

comply with this information may cause the product not to work,

Useful information.

Use on Dimmer

Glance

Maverick MK2 Spot User Manual Rev. 9 -1-

Outdoor Use Master/Slave DMX

Auto Programs Auto-Ranging Power Supply Replaceable Fuse User-Serviceable

Page 6

Before You Begin

important information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any reference t o servicin g in this User housing or attempt any repairs.

Personal Safety

• Avoid direct eye exposure to the light source while the product is on.

• Do not touch this product’s housing during operation because it may be very hot.

Mounting And

• This product is for indoor use only! To prevent risk of fire or shock, do not expose this

• Never carry the product by the power cord or any moving part.

Power And

• Make sure the power cord is not crimped or damaged.

• Never disconnect this product by pulling or tugging on the power cable.

Operation

• Do not operate this product if you see damage on the housing, lenses, or cables. Have the

• In case of a serious operating problem, stop using this product immediately!

Expected LED

LEDs gradually decline i n brightness over time, m ostly because of heat. Packaged in c lusters,

LED conditions. For this

projection intensity may also help to extend the LEDs’ lifespan.

Safety Notes

Rigging

Read all the following Safety Notes before working with this product. These notes inc lude

Manual will only apply to properly trained Chauvet certified technicians. Do not open the

All applicable local codes and regulations apply to proper installation of this product.

• Always disconnect this product from its power source before servicing.

• Always connect this product to a grounded circuit to avoid the risk of electrocution.

product to rain or moisture. (IP20)

• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• Make sure there are no flammable materials close to this product while it is operating.

• When hanging this product, always secure to a fastening device using a safety cable.

Wiring

Lifespan

• Always make sure you are connecting this product to the proper voltage in accordance with the specifications in this manual or on the product’s specification label.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

• Never connect this product to a dimmer pack or rheostat.

• Make sure to replace the fuse with another of the same type and rating.

damaged parts replaced by an authorized technician at once.

• Do not cover the ventilation slots when operating to avoid internal overheating.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a

higher temperature.

If your Chauvet product requires service, contact Chauvet Technical Support.

LEDs exhibit higher operating temperatures than in ideal, singlereason, using clus tered LEDs at the ir fullest intensit y significantl y reduces the LEDs’ lifespan. Under normal con dit ions , t his lif espan can be 40, 000 t o 5 0,0 00 ho ur s . If ex te ndi n g th is lifes pa n is vital, lowe r the operating temperature b y improving the ventilat ion around the product and reducing the ambient temperature to an optimal operating range. In addition, limiting the overall

-2- Maverick MK2 Spot User Manual Rev. 9

Page 7

2. INTRODUCTION

Description

Stunningly bright with prec ision engineered optics and a color mixing s ystem that will leave you breathless, the Ma veric k MK2 Spot sets ne w s tan dar d s in moving head LED s pot s . Po wer ed by an industry leading 440W LED engine, this fixture boasts a CMY+CTO color mixing system, two 6

g slot and lock gobo wheels, a 7 posit ion + white color whee l, variable frost an d 3

facet prism. All of this proj ected through a 13° to 37° zoom system. With the ability to contro l the

every situation. As an

added feature, this fixture can receive Art-Net in, and send out DMX, simplifying cable runs.

Features at a

• 440W LED light engine

• True 1 compatible power input

Rear View

Display

Buttons

Power Switch

Yoke

Handles

Rubber Foot

(x4)

Fans

etherCON® Through

Ports

3-pin DMX

In/Out

5-pin DMX

In/Out

True 1

Compatible

Power In

Fuse-Holder

Indicator

Front View

position rotatin Maverick MK2 Spot over D MX, Art-Net, or b y WDMX, there is an option f or

Introduction

glance

• 16-bit Dimming

• Variable CMY+CTO color mixing

• Two rotating, indexing and interchangeable slot and lock gobos

• DMX , WDMX, sACN, and Art-Net control

• 13° to 37° Zoom angle

• Iris, 3-facet prism, and frost for beam control

Overview

Maverick MK2 Spot User Manual Rev. 9 -3-

Ethernet LED

Wireless Antenna

Page 8

14.6 in

371 mm

15.6 in

396 mm

21.6 in

549 mm

9.8 in

249 mm

17.6 in

447 mm

4.5 in

114 mm

15.1 in

384 mm

9.8 in

249 mm

11.1 in

282 mm

26.4 in

671 mm

Introduction

Dimensions

-4- Maverick MK2 Spot User Manual Rev. 9

Page 9

3. SETUP

AC Power

Each Maverick MK2 Spot has an auto-ranging power suppl y that works with an input voltage

Maverick

Technical

www.chauvetprofessional.com.

• Always connect this product to a protected circuit with an appropriate electrical

completely disconnect the product from power via breaker or by unplugging it.

AC Plug

The Maverick MK2 Spot comes with a power input cord terminate d with a True 1 compatible

end (U.S. market) . If the power input cord that came with your product has no plug, or if you nee d to c h ang e th e Edison plug, use the table below to wire the new plug.

Connection

Wire (U.S.)

Wire (Europe)

Screw Color

AC Live

Black

Brown

Yellow or Brass

AC Neutral

White

Blue

Silver

AC Ground

Green/Yellow

Green

Fuse

Disconnect this product from the power outlet.

Screw the fuse holder cap back in place and reconnect power.

Make sure to disconnect the product’s power cord before replacing a blown fuse. Always replace the blown fuse with another of the same type and rating.

Setup

range of 100 to 240 VAC , 50/60 Hz. To determ ine the power requirem ents for each MK2 Spot, refer to the label affixed to the product. You can also refer to the Specifications chart in this manual. The listed current r ati ng in d icat es t he maximum cur rent dr a w dur i ng normal operation. For mor information, you may download Sizing Circuit Breakers from the Chauvet website

ground to avoid the risk of electrocution or fire.

• Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel serves only as a 0 to 100% switch.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

connector on one end and an Edison p lug on the other

Replacement

Using a flat-head screwdriver, unscrew the fuse holder cap from the housing. Remove the blown fuse and replace with another fuse of the same type and rating

(F 10 A, 250 V).

Maverick MK2 Spot User Manual Rev. 9 -5-

Page 10

Mounting

Before mounting this product, read and follow the Safety Notes. For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.

Orientation

Always mount this product in a safe position and make sure there is adequate room for

can be suspended upri ght or upside down using th e 2 Omega brackets included , or it c an b e pl ac ed o n its r u bber f eet on a flat level surface.

Chauvet recommends using the following general guidelines when mounting this product:

• When selecting an installation location, consider easy access to this product for operation,

• Leave enough slack on the cable to prevent tension and pull on the plugs.

Mounting Diagram

Safety

Cable

Overhead Mounting

Floor Mounting

Rubber Feet (x4)

Mounting Clamps

Omega Brackets

Setup

ventilation, config uration, a nd mainte nance. The Ma verick MK2 Spot

programming adjustments, and routine maintenance.

• Make sure to mount this product away from any flammable material as indicated in the Safety Notes

• Never mount in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect the product.

• If hanging this product, make sure that the mounting location can support the product’s weight. See the T echnic al Specif icat io ns

for the weight-bearing requirements of this

product.

• When hanging this product, always secure to a fastening device using a safety cable. For our CHAUVET Professional line of safety cables, go to http://trusst.com/products/

• When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.

• Place the Maverick MK2 Spot so that it can move freely without hitting anything or anybody.

-6- Maverick MK2 Spot User Manual Rev. 9

Page 11

Setup

Signal Connections

The Maverick MK2 Spot can receive DMX, sACN or Art-Net™ signals. The Maverick MK2 Spot

http://www.chauvetlighting.com/downloads/DMX_Primer_Rev9_ML_WO.pdf

Art-Net™

Art-Net™ is an Et hernet pr otocol th at uses TCP/IP, which transfers large amounts of DMX512

Net™ protocol

Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN

Also known as ANSI E1.31 , stream ing ACN is an Ethernet pr otocol that uses the la yering and

Association (PLASA).

has 2 etherCON® thr oug h port s, an d 3- and 5-pin D M X In an d O ut ports . For more information about DMX, read the DMX primer at:

Connection

data using an etherCON® RJ45 connection over a large network. An Artdocument is available from www.chauvetprofessional.com.

Chauvet Professional recommends using unicast Art-Net™ for best results.

Connection

formatting of Architectur e for Control Networ ks to transport DMX512 data over TCP/I P or any other ACN compatible network. ACN is maintained by the Professional Lighting and Sound

Switch or Router

(such as the NET-Switch

from CHAUVET Professional)

Connection

Diagram

Computer/Controller

(running TCP/IP

protocol)

To other TCP/IP

Devices

Maverick MK2 Spot User Manual Rev. 9 -7-

Page 12

The Maverick MK2 Spot ha s a touchsc reen dis play as we ll as 6 contr ol butto ns. Nav igate the m enu struc ture by pr essing t he

desired menu option on the display

(see To uchscree n Calibr ation

and Touchscreen Lock).

Touchscreen

Control

Panel

Description

Button

Function

Navigates upwards through the menu list or increases the numeric value when in a function

Navigates downwards through the menu list or decreases the numeric value when in a function

Navigates leftwards through the menu list

Enables the currently displayed menu or sets the currently selected value into the selected function

Navigates rightwards through the menu list

Battery Powered

Press and hold until menu screen appears (approx 15 sec.).

Menu Map

Main Level

Programming Levels

Description

Address

000–512

Network Setting

Manual

DHCP

Static

Universe

0 ~ 255

Set the Universe

ArtNetIp

002.243.075.222

IP setting

SubMask

255.000.000.000

Subnet Mask

YES

DMX

WDMX

ArtNet

sACN

YES

Operation

4. OPERATION

buttons, touching the images of the buttons on the sides of the display, or touching the directl y. The touc hscreen c an be locked a nd calibr ated t hrough the S etup options in the men u

and

Exits from the current menu or function

Display

Selection of IP mode (Static IP: 2.243.76.222)

Choose 24 Channels of DMX

Choose 32 Channels of DMX

Signal Selection

Reverse the Pan

Network Setup

Personality

Settings

IP Mode

DMX 24CH

DMX 32CH

Control Mode

Pan Reverse

-8- Maverick MK2 Spot User Manual Rev. 9

Tilt Reverse

Reverse the Tilt

Page 13

Operation

Main Level

Programming Levels

Description

YES

AUTO

540

360

180

270

180

YES

Fast

Slow

YES

30S

Hold

Auto

Full

ECO

Theatrical Dimming

Updated dimming

YES

Legacy dimming that will match older Maverick MK2 Profiles

Linear

Square

I Square

Scurve

Smooth

Fast

Settings

(Continued)

Screen Reverse

Pan Angle

Tilt Angle

BL. O. P/T Move

BL. O. Color Move

BL. O. Gobo Move

Calibration

Touchscreen Lock

Lock Screen

Swap X/Y

Manually or automatically reverse the screen

Change the Pan angle

Change the Tilt angle

Enable/disable XY blackout

Enable/disable color blackout

Enable/disable gobo blackout

Turn on Calibration

Lock the touchscreen

Lock the buttons and touchscreen PASSCODE: 0920

Swap the pan and tilt

X/Y Mode

WDMX Reset

Backlight Timer

Loss of Data

Dimmer Curve

Dimmer Speed

Fans

Pan and tilt speed

Reset the wireless DMX

Set the backlight to turn off automatically after a chosen time

Loss of data setting

Change the fan speed mode

Set the dimmer curve

Change the dimmer speed

Maverick MK2 Spot User Manual Rev. 9 -9-

Page 14

Main Level

Programming Levels

Description

PRESET A

PRESET B

PRESET C

Allows recorded preset menu options to be transferred to other Maverick MK2 Spots in the DMX daisy chain

Pan/Tilt

Iris/ Prism

Color/CMY + CTO

Gobo/Gobo Rotate

Zoom/Frost/

Focus

All

YES

Auto Test

Auto test the product

Pan

Pan Fine

Tilt

Tilt Fine

P/T Speed

Dimmer

Dimmer Fine

Shutter

Virtual

Shaking

Cyan

Megenta

Yellow

CTO

Color

Gobo 1

Gobo 1 Index

Fine

Gobo 1 Rotate

Gobo 2

Gobo 2 Index

Fine

Gobo 2 Rotate

Focus

Focus Fine

Focus Auto

Zoom

Zoom Fine

Operation

Settings

(Continued)

Preset Select

Preset Sync

Reset Function

Factory Settings

Recorded preset menu options

YES

YES/NO Reset individual functions to factory

Reset all functions to factory

Test

-10- Maverick MK2 Spot User Manual Rev. 9

Manual Test

0 ~ 255 Individually test each function/channel

Page 15

Operation

Main Level

Programming Levels

Description

Prism

Prism Rotate

Iris

Frost

CMY Macro

CMY Macro Speed

Special Function

Ver V1

Current Version

Running Mode DMX

DMX Address 001

Temperature 025

Current Temparature

Fixture Hours 00000

Current active hours

ArtNetIp 002.243.075.222

Current IP address

SubMask 255.000.000.000

Current subnet mask

MAC 00.04.a3.08.00.00

MAC address

Base Fan1 Speed 2000rpm

View speed setting

Base Fan2 Speed 2000rpm

View speed setting

Head Fan1 Speed 2000rpm

View speed setting

Head Fan2 Speed 2000rpm

Error Information

_ _ _ _ _

Will appear on screen

Frequency

0Hz

Pan

Pan Fine

Tilt

Tilt Fine

P/T Speed

Dimmer

Dimmer Fine

Shutter

Virtual Shaking

Cyan

Megenta

Yellow

CTO

Color

Gobo 1

Gobo 1 Index Fine

Gobo 1 Rotate

Test

(Continued)

Information

Manual Test

(Continued)

Fixture Information

Fan Information

0 ~ 255 Individually test each function/channel

Current Mode

View speed setting

Channel Information

Maverick MK2 Spot User Manual Rev. 9 -11-

0 ~ 255

Status of individual channel

Page 16

Main Level

Programming Levels

Description

Gobo 2

Gobo 2 Index Fine

Gobo 2 Rotate

Focus

Focus Fine

Focus Auto

Zoom

Zoom Fine

Prism

Prism Rotate

Iris

Frost

CMY Macro

CMY Macro Speed

Special Function

Operating Settings Configuration

Home Screen

The Ma verick MK2 S pot has a hom e screen that s hows the protocol m ode, the IP address or D MX

To see the hom e screen, pr ess

<MENU> repeat edly until it appears on the display.

Start Address

To set the starting address, set the Control Mode and then follow the instr uc t ions bel o w:

Press <ENTER>.

Network Setup

IP Mode

The IP address of the Maver ick MK2 Spot can be set m anuall y, by the ne twork , or to a pr e-set s tatic

Press <ENTER>.

Operation

Information (Continued)

Channel Information

(Continued)

0 ~ 255 Status of individual channel

address, the DMX per sonal ity, an d the c urrent pr oduct tem peratur e.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Start Address, or touch the display

where it says Start Address. If using the buttons instead of the touchscreen, press <ENTER>. Enter the starting address (001–512) with one of the following methods:

• Type the address number using the number pad that shows on the touchscreen display. or

• Using the buttons (or the button icons on the sides of the display),

Use <LEFT> or <RIGHT> to select the digit to be altered. Use <UP> or <DOWN> to increase or decrease the number value of that digit. Repeat until the address is set as desired.

address specific to each product. To set the IP Mode, follow the instructions below:

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display

where it says Network Setup. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP> or <DOWN> to select IP Mode, or touch the display where it says IP Mode. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from:

• Manual (set the IP address with the control panel),

• DHCP (the network sets the IP address),

• Static (a pre-set address specific to each product),

or touch the display where it says the desired mode.

-12- Maverick MK2 Spot User Manual Rev. 9

Page 17

Operation

Subnet and

The Subnet and universe must be assigned through the product menu. To set the Subnet and

Press <ENTER>.

ArtNet IP Address

To set the IP address, do the following:

Press <ENTER>.

Universe

Universe do the following:

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display

where it says Network Setup. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP> or <DOWN> to select Subnet and Universe, or touch the display where it says

Subnet and Universe. If using the buttons instead of the touchscreen, press <ENTER>. Enter the universe address (0–254 for ArtNet, 0–255 for sACN) with one of the following

methods:

• Type the universe number using the number pad that shows on the touchscreen display. or

• Using the buttons (or the button icons on the sides of the display),

Use <LEFT> or <RIGHT> to select the digit to be altered. Use <UP> or <DOWN> to increase or decrease the number value of that digit. Repeat until the universe or subnet is set as desired.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display

where it says Network Setup. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP> or <DOWN> to select ArtNetIP, or touch the display where it says ArtNetIP. If using the buttons instead of the touchscreen, press <ENTER>. Set the IP address (from 000.000.000.000 to 255.255.255.255) with one of the following

methods:

• Through the touchscreen: Touch the display where it shows the byte (set of three numbers) to be changed. Use the number pad on the display to enter the desired number. Repeat until the IP address is set as desired.

• With the buttons: Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed). Use <UP> or <DOWN> to increase or decrease the value. Repeat until the IP address is set as desired.

Maverick MK2 Spot User Manual Rev. 9 -13-

Page 18

Subnet Mask

To set the Subnet Mask, do the following:

Press <ENTER>.

Personality

To set which DMX personality to use, do the following:

(confirm) or touch the

Press <ENTER>.

Settings

To reach the Settings menu, follow the instructions below:

If using the buttons instead of the touchscreen, press <ENTER>.

Control Mode

The Maverick MK2 Sp ot can be set to resp ond to DMX, WDMX , Art-Net™ or sACN. The pr otocol

Press <ENTER>.

controller and the product. See WDMX Reset for troubleshooting information.

Operation

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display

where it says Network Setup. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP> or <DOWN> to select SubMask, or touch the display where it says SubMask. If using the buttons instead of the touchscreen, press <ENTER>. Set the Subnet Mask (from 000.000.000.000 to 255.255.255.255) with one of the following

methods.

• With the buttons: Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed). Use <UP> or <DOWN> to increase or decrease the value. Repeat until the Subnet Mask is set as desired.

In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on the product.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Personality, or touch the display where it

says Personality. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX 24CH or DMX 32CH, or touch the

display where it says the desired option. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (cancel) or YES

display where it says the desired option.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Settings, or touch the display where it

says Settings.

configuration must be set for the product to respond correctly to the controller(s). See the Map for more information. To configure the protocol for the Maverick MK2 Spot, follow the instructions below:

Navigate to the Settings menu. Use <UP> or <DOWN> to select Control Mode, or touch the display where it says Control

Mode. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX, WDMX, sACN, ArtNet., or touch

the display where it says the desired option.

For WDMX control, ensure the antenna is raised and there are no obstructions between the

-14- Maverick MK2 Spot User Manual Rev. 9

Page 19

Pan/Tilt

Orientation

Press <ENTER>.

Display

To set which way the display faces, do the following:

Press <ENTER>.

Pan/Tilt Angle

To set the range of motion the pan or tilt is permitted:

, or touch the display where it says the

Press <ENTER>.

Blackout on

Pan/Tilt

To set whether the product will black out during pan or tilt movement, follow the instructions below:

BL. O. P/T

Press <ENTER>.

Blackout on Color

To set whether the product will black out during color movement, follow the instructions below:

Press <ENTER>.

Blackout on Gobo

To set whether the product will black out during gobo movement, follow the instructions below:

Press <ENTER>.

Operation

To set whether the pan or tilt orientation is normal or inverted:

Navigate to the Settings menu.

Use <UP> or <DOWN> t o selec t Pan Reverse or Tilt Reverse, or touch the display where it

says the desired setting.

If using the buttons instead of the touchscreen, press <ENTER>.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted

orientation), or touch the display where it says the desired option.

Orientation

Range

Movement

Navigate to the Settings menu.

Use <UP> or <DOWN> t o selec t Screen Reverse, or touch the display where it says Screen

Reverse.

If using the buttons instead of the touchscreen, press <ENTER>.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES ( d is p lay is

inverted), or AUTO (the display automatically detects which way the product is facing and

orients itself accordingly), or touch the display where it says the desired option.

Navigate to the Settings menu.

Use <UP> or <DOWN> t o selec t Pan Angle or Tilt Angle

desired setting.

If using the buttons instead of the touchscreen, press <ENTER>.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 540 (540°), 360 or 270 (360° or 270° for

pan or tilt respectively), 180 (180°), or 90 (90°) or touch the display where it says the desired

option.

Navigate to the Settings menu.

Use <UP> or <DOWN> t o selec t BL. O. P/T Move, or touch the display where it says

Move.

If using the buttons instead of the touchscreen, press <ENTER>.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out

during movement), or touch the display where it says the desired option.

Movement

Maverick MK2 Spot User Manual Rev. 9 -15-

Navigate to the Settings menu.

Use <UP> or <DOWN> t o selec t BL. O. Color Move, or touch the display where it says BL. O.

Color Move.

If using the buttons instead of the touchscreen, press <ENTER>.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out

during movement), or touch the display where it says the desired option.

Navigate to the Settings menu.

Use <UP> or <DOWN> t o selec t BL. O. Gobo Move, or touch the display where it says BL. O.

Gobo Move.

If using the buttons instead of the touchscreen, press <ENTER>.

Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out

during movement), or touch the display where it says the desired option.

Page 20

Operation

Touchscreen

Calibration

If the touchscreen is not responding correctly, it may need to be calibrated. To do so:

Follow the instructions, touching the points as they appear on the display.

Touchscreen Lock

To lock or unlock the touchscreen control panel, do the following:

Press <ENTER>.

Lock the Screen

To lock the touchscreen control panel and menu buttons, do the following:

Enter the passcode (0920) using the touchs c reen or buttons .

Swap Pan and Tilt

To switch the pan and ti lt functions so that what normally controls the pan controls the tilt and what

Press <ENTER>.

Pan/Tilt Speed

To set the maximum speed of the pan and tilt:

Press <ENTER>.

WDMX Reset

To reset the WDMX connection from the Maverick MK2 Spot, do the following:

Press <ENTER>.

Once a WDMX receiv er has been link ed to a specific W DMX transmitter, it will remain linked to that specific transmitter until it is linked to a different one.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Calibration, or touch the display where it says Calibration. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate), or touch the display where it says the desired option. Press <ENTER>.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Touchscreen Lock, or touch the display where it sa ys Touchscreen Lock. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch) or YES (display will not respond to touch), or touch the display on the desired option.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Lock Screen, or touch the display where it says Lock Screen. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch or buttons) or YES (display will not respond to touch or buttons), or touch the display where it says the desired option. Press <ENTER>.

To unlock the touchscreen and menu buttons, do the following:

Touch the display touchscreen anywhere or push any menu button.

normally controls the tilt controls the pan, follow the instructions below:

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Swap XY, or touch the display where it says Swap XY. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal pan and tilt) or YES (pan controls tilt, tilt controls pan), or touch the display where it says the desired option.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t XY Mode, or touch the display where it says XY Mode. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Slow or Fast, or touch the display where it says the desired option.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t WDMX Reset, or touch the display where it says WDMX Reset. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset connection) or YES (reset the connection), or touch the display where it says the desired option.

-16- Maverick MK2 Spot User Manual Rev. 9

Page 21

Operation

Backlight Timer

To set the amount of time after inactivity before the display backlight turns off:

Press <ENTER>.

Loss of Data

In case of an inp ut signal being lost in any wa y, the Maverick MK2 Spot will re spond in one of t wo

Press <ENTER>.

Fan Speed

To set the speed of the fans, do the following:

Press <ENTER>.

Dimmer Curve

To set the dimmer curve, follow the instructions below:

Press <ENTER>.

Dimmer Speed

To set the dimmer speed, do the following:

Press <ENTER>.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Backlight Timer, or touch the display where it says Backlight Timer. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 30S (after 30 seconds of inactivity), 1M (after 1 minute of inactivity), 5M (after 5 minutes of inac t iv it y), o r 30M (after 30 minutes of inactivity), or touch the display where it says the desired option.

ways. The product will either hold the last signal received, or black out all LED output. To set which way the product responds, follow the instructions below:

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Loss of Data, or touch the display where it says Loss of Data. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Hold (hold last signal received) or Close (black out all LED output), or touch the display where it says the desired option.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Fans, or touch the display where it says Fans. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product temperature), Full (maximum speed), or ECO (quiet fans mode), or touch the display where it says the desired option.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Dimmer Curve, or touch the display where it says Dimmer Curve. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Squa, or SCurve, or touch the display where it says the desired option.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Dimmer Speed, or touch the display where it says Dimmer Speed. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display where it says the desired option.

Maverick MK2 Spot User Manual Rev. 9 -17-

Page 22

Operation

Preset Select

This option saves 3 different preset menu option configurations. To record and set these presets

• Default is PRESET A. If you make changes inside PRESET A, those changes are saved to

automatically save to the preset you are in.

Preset Sync

Press < ENTER >.

• To s ync other Maverick MK2 Spots, you connect those products by a DMX cable.

affected in the other products.

Reset Functions

To reset the pan, tilt, or all functions as if from startup:

Press <ENTER>.

Factory Reset

To restore the Maverick MK2 Spot to factory default settings, do the following:

Press <ENTER>.

follow the instructions below:

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Preset Select, or touch the display where it says Preset Select. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select PRES ET A, PRES ET B or PRESET C, or touch the display where it says the desired option. Press <ENTER>.

The product will reset. Any changes made to the menu options will be saved to this preset.

PRESET A without having to do anything.

• To c reate a new preset, highlight and select PRESET SELECT. Highlight PRESET B or

PRESET C and press <ENTER>. When you make that selection, the product will reset a

utomatically. Go back and make the changes you need to make in the menu. This will

To sync all menu presets to other Maverick MK2 Spots, follow the instructions below:

Connect all Maverick MK2 Spot via DMX cable. Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Preset Sync, or touch the display where it says Pre set S ync If using the buttons instead of the touchscreen, press < ENTER >. Select YES or touch the display where it says the desired option.

• The product can be in any control mode except WDMX. ArtNet, DMX, sA CN are all

acceptable.

• All menu options are transferred, inc luding the DMX address. Only the IP address in not

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Reset Function, or touch the display where it says Reset Function. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP> or <DOWN> to select the function to reset, from Pan/Tilt, Iris/Prism, Color/CMY+CTO, Gobo/Gobo Rotate, Zoom/Frost/Focus or All, or touch the display where it says the desired option. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset), or touch the display where it says the desired option.

Navigate to the Settings menu. Use <UP> or <DOWN> t o selec t Factory Settings, or touch the display where it says Factory Settings. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory settings), or touch the display where it says the desired option.

-18- Maverick MK2 Spot User Manual Rev. 9

Page 23

Operation

Test Mode

Auto Test

To perform an auto test of the Maverick MK2 Spot functions, follow the instructions below:

Press <ENTER>.

Manual Test

To test the functions of the product manually, do the following:

Press <ENTER>.

System Information

All information about th e current status of the Ma verick MK2 Spot is availab le through the product ’s

Use <UP> or <DOWN> t o s cr oll through the inf or mation.

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says Test. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP> or <DOWN> t o selec t Manual test, or touch the display where it says Manual test. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP> or <DOWN> to select the function to test, from Pan, Pan Fine, Tilt, Tilt Fine, P/S

Speed, Dimmer, Dimmer Fine, Shutter, Virtual Shaking, Cyan, Magenta, Yellow, CTO, Color, Gobo, Gobo Rotate, Gobo 2, Gobo 2 Rotate, Focus, Focus Fine, Focus Auto, Zoom, Zoom Fine, Prism, Prism Rotate, Iris, Frost, CMY Macro, CMY Macro Speed, or Special Function, or touch the display where it says the desired function.

If using the buttons instead of the touchscreen, press <ENTER>. Change the value of the tested function with one of the following methods:

• Type the desired value using the number pad that shows on the touchscreen display. or

• Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.

Sys Info menu. To view this information, follow the instructions below:

Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Information, or touch the display where it says Information. If using the buttons instead of the touchscreen, press <ENTER>. Use <UP> or <DOWN> to select from Fixture Information (shows firmware version, running mode, starting address, etc.), Fan Information (shows speed of the head fans in rpm), Error Information (shows any errors or No E rror!), or Channel Information (shows the current value of all signal input channels) or touch the display where it says the desired option. Press <ENTER>.

Maverick MK2 Spot User Manual Rev. 9 -19-

Page 24

Operation

Offset Mode

The Offset mode provides fine adjustments for the home position of all the moving parts in the optical path as well as the pan and tilt movements. This way, when in their home position, the

This brings you into the Zero Adjust menu screen.

PAN

1. Use <UP> or <DOWN> to select PAN.

4. Press <ENTER>.

TILT

1. Use <UP> or <DOWN> to select TILT.

4. Press <ENTER>.

COLOR

1. Use <UP> or <DOWN> to select COLOR.

4. Press <ENTER>.

GOBO

1. Use <UP> or <DOWN> to select GOBO.

4. Press <ENTER>.

GOBO ROTATE

1. Use <UP> or <DOWN> to select GOBO ROTATE.

4. Press <ENTER>.

GOBO 2

1. Use <UP> or <DOWN> to select GOBO 2.

4. Press <ENTER>.

GOBO 2 ROTATE

1. Use <UP> or <DOWN> to select GOBO 2 ROTATE.

4. Press <ENTER>.

FOCUS 1

1. Use <UP> or <DOWN> to select FOCUS 1.

4. Press <ENTER>.

FOCUS 2

1. Use <UP> or <DOWN> to select FOCUS 2.

4. Press <ENTER>.

moving parts do not show any border or reduce the light output.

1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen appe

ars.

2. Enter the passcode 2323 using one of the following methods:

• Through the touchscreen: use the number pad on the screen to enter 2323.

• With the buttons:

Use <DOWN> to select the number to be changed. Use <UP> to increase the v alu e. Repeat until 2323 has been entered.

3. Press <ENTER>.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

-20- Maverick MK2 Spot User Manual Rev. 9

Page 25

FOCUS GOBO 2

1. Use <UP> or <DOWN> to select FOCUS GOBO 2.

2. Press <ENTER>.

4. Press <ENTER>.

ZOOM

1. Use <UP> or <DOWN> to select ZOOM.

4. Press <ENTER>.

PRISM

1. Use <UP> or <DOWN> to select PRISM.

4. Press <ENTER>.

IRIS

1. Use <UP> or <DOWN> to select IRIS.

4. Press <ENTER>.

FROST

1. Use <UP> or <DOWN> to select FROST.

4. Press <ENTER>.

CYAN

1. Use <UP> or <DOWN> to select CYAN.

4. Press <ENTER>.

MAGENTA

1. Use <UP> or <DOWN> to select MAGENTA.

4. Press <ENTER>.

YELLOW

1. Use <UP> or <DOWN> to select YELLOW.

4. Press <ENTER>.

CTO

1. Use <UP> or <DOWN> to select CTO.

4. Press <ENTER>.

DIMMER

1. Use <UP> or <DOWN> to select DIMMER.

4. Press <ENTER>.

LED POWER

1. Use <UP> or <DOWN> to select LED POWER.

4. Press <ENTER>.

MAC4

1. Use <UP> or <DOWN> to select MAC4.

4. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

Operation

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

Maverick MK2 Spot User Manual Rev. 9 -21-

Page 26

Operation

MAC5

1. Use <UP> or <DOWN> to select MAC5.

4. Press <ENTER>.

MAC6

1. Use <UP> or <DOWN> to select MAC6.

4. Press <ENTER>.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

2. Press <ENTER>.

3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.

-22- Maverick MK2 Spot User Manual Rev. 9

Page 27

Operation

DMX Values

32CH

Channel

Function

Value

Percent/Settings

Pan

000ó255

0–100%

Fine Pan

000ó255

0–100%

Tilt

000ó255

0–100%

Fine Tilt

000ó255

0–100%

Pan/Tilt Speed

000ó255

0–100%

Dimmer

000ó255

0–100%

Fine Dimmer

000ó255

0–100%

000ó003

216ó255

Closed

Open

000ó001

129ó255

Cyan

000ó255

0–100%

Magenta

000ó255

0–100%

Yellow

000ó255

0–100%

CTO

000ó255

0–100%

000ó006

224ó255

Open

Counter-clockwise color scroll, slow to fast

000ó008

192ó255

Open

Counter-clockwise gobo scroll, slow to fast

8 Shutter

9 Virtual Shutter

14 Color Wheel

Gobo Wheel 1 [Gobo Designs

004ó007 008ó076 077ó145 146ó215

002ó128

007ó013 014ó020 021ó027 028ó034 035ó041 042ó047 048ó059 060ó187 188ó219 220ó223

009ó017 018ó026 027ó035 036ó044 045ó053 054ó063 064ó073

]

074ó082 083ó091 092ó100 101ó109 110ó118 119ó127 128ó191

Open Slow to fast Pulse effect from slow to fast Random effect from slow to fast

No function Shaking strobe, slow to fast Fade in/out, slow to fast

Red Orange Green Blue Magenta Yellow UV Split colors Clockwise color scroll, fas t to slow Stop

Gobo 1 (circuits) Gobo 2 (ring of rings) Gobo 3 (checker vortex) Gobo 4 (triangle) Gobo 5 (star field) Gobo 6 (lenticular glass) Gobo 6 Shaking Gobo 5 Shaking Gobo 4 Shaking Gobo 3 Shaking Gobo 2 Shaking Gobo 1 Shaking Open Clockwise gobo scroll, fast to slow

Maverick MK2 Spot User Manual Rev. 9 -23-

Page 28

Operation

32CH

Channel

Function

Value

Percent/Settings

000ó063

232ó255

Rotating Gobo Index

Bounce effect

Gobo Wheel 1 Index Fine

000ó008

192ó255

Open

Counter-clockwise gobo scroll, slow to fast

000ó063

232ó255

Rotating Gobo Index

Bounce effect

Gobo Wheel 2 Index Fine

Focus

000ó255

0–100%

Fine Focus

000ó255

0–100%

000ó010

211ó255

No Function

Auto-detect distance

Zoom

000ó255

0–100%

Fine Zoom

000ó255

0–100%

000ó004 005ó255

No Function Prism Effect

000ó127

194ó255

Rotating position

Counter-clockwise rotating, fast to slow

16 Gobo Rotating 1

19 Gobo Rotating 2

Gobo Wheel 2 [Gobo Designs

]

064ó145 146ó149 150ó231

000ó255 0–100%

009ó017 018ó026 027ó035 036ó044 045ó053 054ó063 064ó073 074ó082 083ó091 092ó100 101ó109 110ó118 119ó127 128ó191

064ó145 146ó149 150ó231

Clockwise rotating, fast to slow Stop Counter-clockwise rotating, slow to fast

Gobo 1 (spiral) Gobo 2 (dot chiclets) Gobo 3 (splat breakup) Gobo 4 (wavy bar) Gobo 5 (shower glass) Gobo 6 (lenticular glass) Gobo 6 Shaking Gobo 5 Shaking Gobo 4 Shaking Gobo 3 Shaking Gobo 2 Shaking Gobo 1 Shaking Open Clockwise gobo scroll, fast to slow

Clockwise rotating, fast to slow Stop Counter-clockwise rotating, slow to fast

23 Auto Focus

26 Prism

27 Prism Rotate

000ó255 0–100%

011ó030 031ó050 051ó070 071ó090 091ó110 111ó130 131ó150 151ó170 171ó190 191ó210

128ó189 190ó193

0-5m 6m 7m 8m 9m 10m

12.5m 15m

17.5m 20-60m

Clockwise rotating, slow to fast Stop

-24- Maverick MK2 Spot User Manual Rev. 9

Page 29

Operation

32CH

Channel

Function

Value

Percent/Settings

000ó063

192ó255

Big to small

Slow zoom out, fast zoom in (slow to fast)

Frost

000ó255

0–100%

000ó009 010ó255

No function CMY macro

CMY Macro Speed

000ó255

fast to slow

000ó007

251ó255

No function

XY fast mode

24CH

Channel

Function

Value

Percent/Settings

Pan

000ó255

0–100%

Fine Pan

000ó255

0–100%

Tilt

000ó255

0–100%

Fine Tilt

000ó255

0–100%

Pan/Tilt Speed

000ó255

0–100%

Dimmer

000ó255

0–100%

000ó003

216ó255

Closed

Open

28 Iris

30 CMY Macro

32 Control

064ó127 128ó191

008ó015 016ó023 024ó031 032ó039 040ó047 048ó055 056ó095 096ó103 104ó111 112ó119 120ó127 128ó135 136ó143 144ó151 152ó159 160ó167 168ó175 176ó183 184ó191 192ó199 200ó207 208ó215 216ó220 221ó225 226ó230 231ó235 236ó240 241ó245 246ó250

Auto change, slow to fast Slow zoom in, fast zoom out (slow to fast)

XY blackout C blackout G blackout XYC blackout XYG blackout XYCG blackout no function X reset Y reset Color reset Gobo & gobo rotating reset no function Prism reset Focus reset All reset Iris reset Frost reset Zoom reset CMY+CTO reset Fan low speed Fan full speed Fan auto no function Iris Fast mode Iris Smooth mode XY swap on XY swap off no function XY smooth mode

7 Shutter

Maverick MK2 Spot User Manual Rev. 9 -25-

004ó007 008ó076 077ó145 146ó215

Open Slow to fast Pulse effect from slow to fast Random effect from slow to fast

Page 30

Operation

24CH

Channel

Function

Value

Percent/Settings

000ó001

Cyan

000ó255

0–100%

Magenta

000ó255

0–100%

Yellow

000ó255

0–100%

CTO

000ó255

0–100%

000ó006

224ó255

Open

Counter-clockwise color scroll, slow to fast

000ó008

192ó255

Open

Counter-clockwise gobo scroll, slow to fast

000ó063

232ó255

Rotating Gobo Index

Bounce effect

8 Virtual Shutter

13 Color Wheel

Gobo Wheel 1 [Gobo Designs

002ó128 129ó255

007ó013 014ó020 021ó027 028ó034 035ó041 042ó047 048ó059 060ó187 188ó219 220ó223

009ó017 018ó026 027ó035 036ó044 045ó053 054ó063 064ó073

]

074ó082 083ó091 092ó100 101ó109 110ó118 119ó127 128ó191

No function Shaking strobe, slow to fast Fade in/out, slow to fast

Red Orange Green Blue Magenta Yellow UV Split colors Clockwise color scroll, fas t to slow Stop

15 Gobo Rotating 1

-26- Maverick MK2 Spot User Manual Rev. 9

064ó145 146ó149 150ó231

Clockwise rotating, fast to slow Stop Counter-clockwise rotating, slow to fast

Page 31

Operation

24CH

Channel

Function

Value

Percent/Settings

000ó008

192ó255

Open

Counter-clockwise gobo scroll, slow to fast

000ó063

232ó255

Rotating Gobo Index

Bounce effect

Focus

000ó255

0–100%

Zoom

000ó255

0–100%

000ó004 005ó255

No function Prism effect

000ó127

194ó255

Rotating position

Counter-clockwise rotating, fast to slow

000ó063

192ó255

Big to small

Slow zoom out, fast zoom in (slow to fast)

Frost

000ó255

0–100%

000ó007

184ó191

No function

CMY+CTO reset

17 Gobo Rotating 2

20 Prism

21 Prism Rotate

Gobo Wheel 2 [Gobo Designs

]

009ó017 018ó026 027ó035 036ó044 045ó053 054ó063 064ó073 074ó082 083ó091 092ó100 101ó109 110ó118 119ó127 128ó191

064ó145 146ó149 150ó231

128ó189 190ó193

Clockwise rotating, fast to slow Stop Counter-clockwise rotating, slow to fast

Clockwise rotating, slow to fast Stop

22 Iris

24 Control

064ó127 128ó191

008ó015 016ó023 024ó031 032ó039 040ó047 048ó055 056ó095 096ó103 104ó111 112ó119 120ó127 128ó135 136ó143 144ó151 152ó159 160ó167 168ó175 176ó183

Auto change, slow to fast Slow zoom in, fast zoom out (slow to fast)

Maverick MK2 Spot User Manual Rev. 9 -27-

Page 32

Operation

192ó199

251ó255

Fan low speed

XY fast mode

24 Control

200ó207 208ó215 216ó220 221ó225 226ó230 231ó235 236ó240 241ó245 246ó250

Fan full speed Fan auto no function Iris Fast mode Iris Smooth mode XY swap on XY swap off no function XY smooth mode

-28- Maverick MK2 Spot User Manual Rev. 9

Page 33

Operation

Color Wheel

Gobo Designs

Circuits

Ring of Rings

Checker Vortex

Triangle

Star Field

Lenticular Glass

Spiral

Dot Chiclets

Wavy Bar

Shower Glass

Lenticular Glass

Red

Orange

Green

Blue

32 mm

28 mm

Gobo Dimensions

Magenta

Yellow

Open

Wheel 1

Wheel 2

Splat Breakup

Maverick MK2 Spot User Manual Rev. 9 -29-

Page 34

Operation

Gobo

The gobos in both g obo wheels 1and 2 are rem ovab le f rom t heir gob o ho lders . This operation is quite simple, although i t requires the technician to be caref ul and to follow the recommended procedure.

• Make sure to disconnect the product’s power cord before replacing a gobo

temperature from the lamp.

Procedure

1. Turn the product off and disconnect it from the power outlet.

correctly installed, the gobo holder should easily slide itself into the gobo wheel slot.

Gobo Replacement

Gobo Holder

Gobo

Retaining Spring

Gobo Wheel 1

Gobo Wheel 2: Gobo

panel.

Gobo Wheel 1

Replacement

• Always replace a gobo with a gobo of the same dimensions.

• Use only glass gobos when using custom gobos in gobo wheel 2.

• When inserting a glass gobo, always make sure that the shiny side of the gobo

(glass base) faces the lamp. This provides a layer of protection ag ainst the high

2. Open the head cover by loosening the 4 Phillips-head screws on the sides of the top cover ¼-turn.

3. Separate the gobo holder away from the gobo wheel by pushing it toward the front of t

oving head (direction 1 in the diagram). Be careful not to push the gobo out of the g

der.

hol

4. Extract the gobo holder by pulling it outward (direction 2 in the diagram).

5. On a flat surface, remove the expansion ring that holds the gobo in place and remove the gobo f

rom the gobo holder.

6. Insert a new gobo and hold it in place with the expansion ring.

7. Slide the tip of the gobo holder under the pressure plate near the center of the gobo wheel.

8. Push the gobo holder inwards. DO NOT force the gobo holder into the gobo wheel slot. If

obo

Diagrams

Wheel 2 can be accessed

from below Gobo Wheel 1.

Remove the lower access

-30- Maverick MK2 Spot User Manual Rev. 9

Page 35

5. FIRMWARE UPDATE

The following steps apply to the Windows® 7 operating system:

Step 1

Connect the Maverick MK2 Spot to a computer

Step 2

Set the control protocol on the Maverick MK2

Step 3

On the computer, open the Network and Sharing Center (through the Start Menu, the Control Panel, o r

Step 4

Select the network that th e product is con nected to b y clicking the blue text th at corresponds to that network

with an ethernet cable. Verify the network is connected to the computer with the Maverick MK2 Spot.

Spot to ArtNet in Single Control mode. (See Single Control Protocol) Set the IP Mode to Static. (See IP Mode)

Firmware Update

the Network icon on the right side of the Taskbar).

on the right side of the window.

Maverick MK2 Spot User Manual Rev. 9 -31-

Page 36

Firmware Update

Step 5

Click Properties on the Status window that pops up.

Step 6

On the Properties window:

Step 7

On the TCP/IPv4 Properties window:

Click on Internet Protocol Version 4 (TCP/IPv4) to select it. Click Properties.

-32- Maverick MK2 Spot User Manual Rev. 9

Select Use the following IP address: Type 2.255.0.0 into the IP address bar. Press <Tab> on your keyboard. The Subnet

mask bar should automatically populate as

255.0.0.0. If it does not, enter it manually. Ignore the Default gateway bar.

Page 37

Step 8

View the Home Screen on the Maverick MK2

Spot. (see Home Screen)

internet browser.)

Step 9

On the Welcome screen:

If the user nam e and pass word do not work, res et the product to factory defaults. (see Factory Reset)

Step 10

On the page that appears, click Upgrade.

Step 11

Find the latest Firmware Upgrade on the website at ck-mk2-wash under DOWNLOADS.

Step 12

Click Choose File on the Maverick MK2 Spot

display. Once the product finishes installing the Do NOT turn the product off during this process.

Step 13

On the Maverick MK2 Spot, verify the firmware has

) and checking that the version number

Step 15

Disconnect the Maverick MK2 Spot from the computer. The firmware update is complete.

Open the internet browser on the computer. Enter the IP address from the Maverick MK2 Spot display into the URL bar of the internet browser. (For example, if the display of the product reads

2.11.0.1, enter 2.11.0.1 into the URL bar of the

Enter admin as both the User Name and Password. No capital letters. Press Log In on the screen, or <Enter> on the keyboard.

Firmware Update

https://www.chauvetprofessional.com/products/maveri

Upgrade page.

In the File Explorer window that pops up, select

the Firmware Upgrade file from the website and click Open.

Click Upload File.

A Downloading message will appear on the product’s firmware, it will reset.

been updated by navigating to Sys Info (System Information matches the name of the file on the computer.

The examples shown are for illustrative purposes.

Maverick MK2 Spot User Manual Rev. 9 -33-

Page 38

Technical Information

Product

To maintain optim um performance and minimize wear, clean this product freque ntl y. Us a ge an d

up reduces light output

can lead to reduced light source life and

Gently polish the lens surfaces until they are free of haze and lint.

Indicator

Meaning

Indicator

Meaning

Focus

Focus error detected

Y_cm

Tilt magnetic sensor error

Zoom

Zoom error detected

Y_op

Tilt optocoupler error

Prism

Prism error detected

CPU_A

IC-A error

Prism.R

Rotating prism error detected

CPU_B

IC-B error

Gobo

Gobo wheel 1 error detected

CPU_C

IC-C error

Gobo.R

Rotating gobo wheel 1 error detected

CPU_D

IC-D error

Gobo2

Gobo wheel 2 error detected

CPU_E

IC-E error

Gobo2.R

Rotating Gobo wheel 2 error detected

Head Fan1

Head fan 2 error detected

Color

Color error detected

Head Fan2

Head fan 2 error detected

Iris

Iris error detected

Base Fan1

Base fan 1 error detected

CYAN

Cyan error detected

Base Fan2

Base fan 2 error detected

MAGENTA

Magenta error detected

YELLOW

Yellow error detected

CTO

CTO error detected

X_cm1

Pan magnetic sensor 1 error detected

X_cm2

Pan magnetic sensor 2 error detected

X_op

Pan optocoupler error

6. TECHNICAL INFORMATION

Maintenance

Error Indication

environment are contributing factors in determining the cleaning frequency. As a rule, clean this product at least twice a month. Dust buildperformance and can cause overheating. This increased mechanical wear. To clean your product:

Unplug the product from power. Wait until the product is at room temperature. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external vents. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl alcohol. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue. Wipe any dirt or grime to the outside edges of the lens surface.

Always dry the external surfaces thoroughly and carefully after cleaning them.

Do not spin the cooling fans by blowing compressed air into them.

-34- Maverick MK2 Spot User Manual Rev. 9

Page 39

7. TECHNICAL SPECIFICATIONS

Dimensions and

Length

Width

Height

Weight

15.1 in (385 mm)

9.8 in (250 mm)

26.4 in (671 mm)

62.8 lb (28.5 kg)

Note: Dimensions in inches rounded to the nearest decimal digit.

Electrical

Power Supply Type

Range

Voltage Selection

Switching (internal)

100–240 VAC, 50/60 Hz

Auto-ranging

Parameter

120 VAC, 60 Hz

208 VAC, 60 Hz

230 VAC, 50 Hz

Consumption

740 W

723 W

700 W

Current

6.01 A

3.63 A

3.33 A

Fuse/Breaker

F 10 A, 250 V

Power I/O

U.S./Canada

Worldwide

Power input connector

True 1 compatible

Power cord plug

Edison (U.S.)

Local plug

Light Source

Type

Power

Lifespan

LED

440 W

50,000 hours

Color

Quantity

Current

CW (cold white)

5.6 A

Photo Optic

Parameter

Value

Illuminance (13°) @ 5 m

18,079 lux

Illuminance (37°) @ 5 m

2,518 lux

Beam Angle

12° to 35°

Field Angle

13° to 37°

Zoom Angle

13° to 37°

Color Temperature

6,808 K

CRI

Strobe Rate

0 to 20 Hz

Gobo Dimensions

Outside Diameter

Diameter

Thickness

32 mm

28 mm

3.3 mm

DMX

I/O Connector

Channel Range

3- and 5-pin XLR

24 or 32

Art-Net™/ sACN

I/O Connector

Channel Range

etherCON®

24 or 32

Thermal

Max. External Temperature

Cooling System

113 °F (45 °C)

Fan-Assisted Convection

Ordering

Product Name

Item Name

Item Code

UPC Number

Maverick MK2 Spot

MAVERICKMK2SPOT

08011154

781462215026

Weight

Technical Specifications

Gobo Wheels

Maverick MK2 Spot User Manual Rev. 9 -35-

Image

Max.

Page 40

Photometrics

Chart

Technical Specifications

-36- Maverick MK2 Spot User Manual Rev. 9

Page 41

Returns

Send the product pr epaid, in the original box, and with the original packing and ac cessories.

Chauvet will not issue call tags.

Call Chauvet and reques t a Return Merchandise Authorizat ion (RMA) number before shippin g

e model number, ser ial number , and a brief desc ription of

Clearly label the package with an RMA number. Chauvet will refuse any product returned without an RMA number.

DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.

Once you have rec ei ved the RMA num ber , inc lud e t he following information on a piece of paper

Be sure to pack the product properly. Any shipping damage resulting from inadequate

boxing is

recommended.

Chauvet reserves the right to use its own discretion to repair or replace returned product(s).

the product. Be prepared to provide t h the cause(s) for the return.

inside the box:

• Your name

• Your address

• Your phone number

• The RMA number

• A brief description of the problem(s)

packaging will be the customer’s responsibility. FedEx packing or double-

Returns

Maverick MK2 Spot User Manual Rev. 9 -37-

Page 42

General Information

Technical Support

Chauvet World Headquarters

Address: 5200 NW 108th Avenue

Voice: (844) 393-7575

www.chauvetprofessional.com

Chauvet Europe Ltd

Address: Unit 1C

Email: uktech@chauvetlighting.com

Chauvet Europe BVBA

Address : Stokstra at 18

Email: Eutech@chauvetlighting.com

Chauvet France

Address: 3, Rue Ampère

Voice: +33 1 78 85 33 59

Email: Eutech@chauvetlighting.com

Chauvet Germany

Address: Bruno-Bürgel-Str. 11

Voice: +49 421 62 60 20

Email: Eutech@chauvetlighting.com

Chauvet Mexico

Address: Av. de las Partidas 34-3B

Email: servicio@chauvet.com.mx

Outside the U.S., U.K., Irelan d, Be nelux, France, Germany, or Mexico, contact the dealer of record. Follow the instructions to request support or to return a product. Visit our website for contact details

Contact Us

ONTACT

Sunrise, FL 33351 Voice: (954) 577-4455 Toll free: (800) 762-1084

Brookhill Road In dustrial Es tate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115

9770 Kru ishoutem Belgium Voice: +32 9 388 93 97

91380 Chilly-Mazarin France

28759 Bremen Germany

(Entrance by Calle 2) Zona Industrial Lerma Lerma, Mexico C.P. 52000 Voice: +52 (728) 690-2010

Email: chauvetcs@chauvetlighting.com Website:

Website:

Website: www.chauvetlighting.eu

Website:

www.chauvetprofessional.mx

www.chauvetlighting.co.uk

Maverick MK2 Spot User Manual Rev. 9