Page 1
USER MANUAL
Model ID: COLORDASHACCENT3
Page 2
Edition Notes
The COLORdash Accent 3 User Manual includes a description, safety precautions, installation,
programming, operation, and maintenance instructions for the COLORdash Accent 3 as of the release
date of this edition.
Trademarks
CHAUVET, the Chauvet logo, and COLORdash Accent 3 are registered trademarks or trademarks of
Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all designs, texts, and
images are owned by Chauvet.
© Copyright 2021 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage, or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident, or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision; however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com
.
Document Revision
This COLORdash Accent 3 User Manual is the 3rd edition of this document. Go to
www.chauvetprofessional.com
for the latest version.
COLORdash Accent 3 User Manual Rev. 3
Page 3
Table of Contents
TABLE OF CONTENTS
1. Before You Begin ......................................................................................... 1
What Is Included ...................................................................................................... 1
Claims ...................................................................................................................... 1
Text Conventions ..................................................................................................... 1
Symbols ................................................................................................................... 1
Safety Notes............................................................................................................. 2
Personal Safety.............................................................................................................. 2
Mounting and Rigging .................................................................................................... 2
Power and Wiring........................................................................................................... 2
Operation ....................................................................................................................... 2
Expected LED Lifespan............................................................................................ 2
2. Introduction................................................................................................... 3
Features................................................................................................................... 3
Product Overview..................................................................................................... 3
Product Dimensions................................................................................................. 4
3. Setup.............................................................................................................. 5
AC Power ................................................................................................................. 5
AC Plug .......................................................................................................................... 5
DMX Linking............................................................................................................. 5
DMX Personalities.......................................................................................................... 5
Remote Device Management (RDM) ............................................................................. 5
Master/Slave Connectivity........................................................................................ 5
Mounting .................................................................................................................. 6
Orientation...................................................................................................................... 6
Rigging ........................................................................................................................... 6
Procedure....................................................................................................................... 6
Filters ............................................................................................................................. 6
4. Operation....................................................................................................... 7
Control Panel Operation........................................................................................... 7
Programming............................................................................................................ 7
Configuration (DMX) ................................................................................................ 7
DMX Personalities.......................................................................................................... 7
DMX Control................................................................................................................... 7
Menu Map ................................................................................................................ 8
DMX Channel Assignments and Values .................................................................. 11
HSIC (7 Channels).......................................................................................................... 11
Advanced (10 Channels) ................................................................................................ 12
Basic (4 Channels).......................................................................................................... 13
Configuration (Standalone) ...................................................................................... 14
Static Colors................................................................................................................... 14
Automatic Programs....................................................................................................... 14
Run ................................................................................................................................. 14
Edit.................................................................................................................................. 14
Configuration (Settings) ........................................................................................... 15
Master/Slave .................................................................................................................. 15
Dimmer Profiles.............................................................................................................. 15
LED Frequency .............................................................................................................. 15
DMX Error/Loss.............................................................................................................. 15
Calibration ...................................................................................................................... 16
Display Timeout ............................................................................................................. 16
Passcode ....................................................................................................................... 16
System Information ........................................................................................................ 16
Factory Reset................................................................................................................. 16
5. Maintenance.................................................................................................. 17
Product Maintenance ............................................................................................... 17
6. Technical Specifications.............................................................................. 18
Returns.............................................................................................................. 19
Contact Us......................................................................................................... 20
COLORdash Accent 3 User Manual Rev. 3
i
Page 4
Before You Begin
1. Before You Begin
What Is Included
• COLORdash Accent 3
• Quick Reference Guide
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
Symbols
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital
data transmission protocol.
FCC Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
RF Exposure Warning for North America, and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm between
the radiator and your body. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Page 1 of 20
COLORdash Accent 3 User Manual Rev. 3
Page 5
Before You Begin
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained, certified technicians. Do not open the housing
or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• Do not operate this product outdoors or in any location where dust, excessive heat, water, or
humidity may affect it (IP20).
• Do not leave any flammable material within 50 cm of this product while operating or connected to
power.
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to
warm, humid ballroom) condensation may form on the internal electronics of the product. To avoid
causing a failure, allow product to fully acclimate to the surrounding environment before connecting
it to power.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer
than 13.7 ft (4.2 m) is not expected.
• When hanging this product, always secure to a fastening device using a safety cable.
Power and Wiring
• Always make sure you are connecting the product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• Never connect the product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special
cord or cord exclusively available from the manufacturer or his service agent.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service
agent or a similar qualified person.
• The luminaire is intended for professional use only.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher
temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower
temperatures.
• In the event of a serious operation problem, stop using this product immediately!
If your Chauvet product requires service, contact Chauvet Technical Support.
Expected LED Lifespan
Use and heat will gradually reduce LED brightness over time. Clustered LEDs produce more heat than
single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is
40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit
the overall intensity.
COLORdash Accent 3 User Manual Rev. 3
Page 2 of 20
Page 6
Introduction
Menu
buttons
LED
display
Bracket
adjustment
knob
Mounting
bracket
Magnetic
sliding ring
Filters
2. Introduction
COLORdash Accent 3 delivers a tremendous punch of evenly mixed light in a tight 9° beam, expandable
up to 14° without sacrificing any quality of light. Powered by a 20W RGBA LED, this palm-sized fixture
excels at delivering saturated colors and brilliant pastels with a soft, even glow. Variable pulse width
modulation allows this fixture to be used for any on-camera applications without any issue of flicker, and an
on-board OLED display effortlessly controls and addresses the fixture via DMX or in a standalone mode.
Features
• RGBAW 4-cell LED Batten with seamless end-to-end color for wash or pixel mapping
• Completely homogenized color with no separation or dimmed lens corners
• All environment operation with IP rated power, DMX, and Ethernet connections
• Color temperature presets, from 3200 K to 10000 K
• Selectable, smooth dimming curves for programming versatility
• Built for touring, live event, television, and theatrical productions
• Large, easy to navigate display with password protection
Product Overview
Page 3 of 20
COLORdash Accent 3 User Manual Rev. 3
Page 7
Introduction
3.67 in
93 mm
5.54 in
133 mm
6.42 in
163 mm
4.52 in
114 mm
4.78 in
121 mm
0.91 in
23 mm
1.02 in
26 mm
Product Dimensions
COLORdash Accent 3 User Manual Rev. 3
Page 4 of 20
Page 8
Setup
3. Setup
AC Power
The COLORdash Accent 3 has an auto-ranging power supply and it can work with an input voltage range
of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The COLORdash Accent 3 comes with a power input cord terminated with an Edison plug (U.S. market). If
the power input cord that came with the product has no plug, or if the Edison plug needs to be changed,
use the table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
DMX Linking
The COLORdash Accent 3 can be linked to a DMX controller using a 5-pin DMX connection. If using other
DMX-compatible products with this product, you can control each individually with a single DMX controller.
DMX Personalities
The COLORdash Accent 3 uses a 5-pin DMX data connection for its 3 control personalities: Basic (4Ch),
HSIC (7Ch), and Advanced (10Ch).
• Refer to the Operation chapter to learn how to configure the COLORdash Accent 3 to work in these
personalities.
• The DMX Channel Assignments and Values
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller, download
the DMX Primer from the Chauvet website: www.
section provides detailed information regarding the control
chauvetprofessional.com.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The COLORdash Accent 3 supports RDM
protocol that allows feedback to make changes to menu map options.
Master/Slave Connectivity
The Master/Slave mode allows a COLORdash Accent 3 (the master) to control one or more
COLORdash Accent 3 products (the slaves) without a DMX controller. One COLORdash Accent 3 becomes
the master when running an auto program, or by being in Static mode.
You must configure each slave’s control panel to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
• The Operation
• If you are not familiar with or need more information about DMX standards, or the DMX
Page 5 of 20
configure the master and slaves.
cables needed to link this product to a DMX controller, download the DMX Primer from
the Chauvet website: www.chauvetprofessional.com
section of this manual provides detailed instructions on how to
.
COLORdash Accent 3 User Manual Rev. 3
Page 9
Setup
Safety cable
Mounting clamp
Overhead mounting
Floor mounting
Clear protective filter
Frosted diffusing filter
Magnetic sliding ring
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product:
• When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
• When hanging this product, make sure that the mounting location can support the product’s weight.
See the Technical Specifications
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power-linking cables to reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired
angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
for the weight-bearing requirements of this product.
Procedure
The COLORdash Accent 3 comes with a double-bracketed yoke to which you can either attach a mounting
clamp for hanging or simply use as a floor stand. Mounting clamps are sold separately. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per product.
For the CHAUVET Professional line of mounting clamps, go to http://www.trusst.com/products
Mounting Diagram
.
.
Filters
The
COLORdash Accent 3 comes with two removable filter films: 1) a frosted one that diffuses light output,
and 2) a clear one that protects both the frosted film and the lens. Both can be attached to the product
through the magnetic sliding ring on top of the lens.
COLORdash Accent 3 User Manual Rev. 3
Page 6 of 20
Page 10
Operation
4. Operation
Control Panel Operation
Button Function
<MENU> Exits from the current menu or function
<UP>
<DOWN> Navigates upward through the menu list or increases the numeric value when in a function
<ENTER>
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
• To select an option or value within the current programming level, press <UP> or <DOWN> until the
• Press <MENU> repeatedly to exit to the previous main level.
Configuration (DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX Personalities
This setting allows a user to choose a particular DMX personality.
1. Go to Personality main level.
2. Select the desired personality (Basic, Advanced, or HSIC).
Enables the currently displayed menu or sets the currently selected value in to the current
function
Navigates downward through the menu list or decreases the numeric value when in a function
Press <ENTER> to select. This will take you to the first programming level for that option.
option shows on the display. Press <ENTER> to select. In this case, if there is another programming
level, you will see that first option, or you will see the selected value.
•See the DMX Control section for the highest starting address recommended for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the
new personality setting.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Channel Assignments and Values.
2. Set the starting address:
a. Go to DMX Address main level.
b. Select the starting address (000–509).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality DMX Address
10 channels 503
6 channels 507
4 channels 509
Page 7 of 20
COLORdash Accent 3 User Manual Rev. 3
Page 11
Operation
Menu Map
Refer to the COLORdash Accent 3 product page on www.chauvetprofessional.com for the latest menu map.
Main Level Programming Levels Description
Selects DMX address
Start Address
Personality
Preset
Colors
Static Colors
Manual
Color
1–509*
Basic 4 channels: RGBA
Advanced
HSIC
R Red
G Green
B Blue
A Amber
RG Red + green
RB Red + blue
RA Red + amber
GB Green + blue
GA Green + amber
AB Amber + blue
RGB Red + green + blue
RGA Red + green + amber
RBA Red + blue + amber
GBA Green + blue + amber
RGBA Red + green + blue + amber
Red
Green
Blue
Amber
(*highest channel restricted to
personality chosen)
10 channels: 16-bit dimmer,
RGBA, strobe, color macros,
auto programs, dimmer speed
7 channels: intensity, hue, hue
fine, saturation, color
temperature, strobe, dimmer
speed
Combine red, green, blue, and
amber to make a custom color
(0–100%)
COLORdash Accent 3 User Manual Rev. 3
Page 8 of 20
Page 12
Main Level Programming Levels Description
AUTO. 1
AUTO. 2
AUTO. 3
AUTO. 4
Auto
Programs
Master/Slave
Dimmer
Mode
LED
Frequency
Run
Edit
AUTO. 5
AUTO. 6
AUTO. 7
AUTO. 8
AUTO. 9
AUTO. 10
User Program 1
User Program 2
User Program 3
User Program 4
User Program 5
User Program 6
User Program 7
User Program 8
User Program 9
User Program 10
User Program 1
User Program 2
User Program 3
User Program 4 Red
User Program 5 Green
User Program 6 Blue
User Program 7 Amber
User Program 8
User Program 9
User Program 10
SCENE-
01–30
Master DMX mode (master)
Slave Slave mode
OFF Linear dimmer
DIM1–4
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25000Hz
SPEED 0–100
0–255
Preset automatic programs
Customizable programs
Allows user to customize
automatic programs
Dimming curves: Dimmer 1
(fast) to Dimmer 4 (slow)
Sets the Pulse Width
Modulation (PWM) frequency
Operation
Page 9 of 20
COLORdash Accent 3 User Manual Rev. 3
Page 13
Operation
Main Level Programming Levels Description
Continue to last defined setting
during DMX signal loss or DMX
error
Blackout during DMX signal
loss or DMX error
Allows user to customize color
temperature
Display backlight remains on
Turns off display backlight after
10 seconds of inactivity
Turns off display backlight after
30 seconds of inactivity
Turns off display backlight after
2 minutes of inactivity
Turns on or off the passcode
requirement for changing
settings
Password: <UP>, <DOWN>,
<UP>, <DOWN>, <ENTER>
Displays total hours the
product has been powered on
Displays unit temperature in °C
Displays firmware version
Displays product name
Displays product UID
Resets settings to factory
default
Setting
Information
Factory
Reset
DMX Error/Lost
Calibration
Display Backlight
Passcode
Fixture Hours
Tem p erat ure
Firmware Version
Device Label
Device UID
Hold Last
Blackout
3200K
3400K
3500K
4000K
4200K
4500K
4900K
5600K
6000K
6500K
7200K
8000K
8500K
10000K
_ _ _ _ _ _ _ _ _ _ _ _ _ _
No
Yes
Red
Green
Blue
Amber
On
10s
30s
2Min
On
Off
_ _ _Hours
_ _C
V_ _
Accent 3
0-255
COLORdash Accent 3 User Manual Rev. 3
Page 10 of 20
Page 14
DMX Channel Assignments and Values
HSIC (7 Channels)
Channel Function Value Percent/Setting
1Intensity 000 255 0–100%
2Hue 000 255 0–100%
3 Hue fine 000 255 0–100%
4 Saturation 000 255 0–100%
000 010 No function
011 028 3200K
029 046 3400K
047 064 3500K
065 082 4000K
083 100 4200K
5
6Strobe
7 Dimmer speed
Color
temperature
101 118 4500K
119 136 4900K
137 154 5600K
155 172 6000K
173 190 6500K
191 208 7200K
209 226 8000K
227 244 8500K
245 255 1000K
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning strobe, slow to fast
180 189 No function
190 255 Random strobe
000 009 Preset dimmer speed from display menu
010 029 Dimming curve off (linear dimmer)
030 069 Nonlinear dimming curve 1 (fastest)
070 129 Nonlinear dimming curve 2
130 189 Nonlinear dimming curve 3
190
255 Nonlinear dimming curve 4 (slowest)
Operation
Page 11 of 20
COLORdash Accent 3 User Manual Rev. 3
Page 15
Operation
Advanced (10 Channels)
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Dimmer fine 000 255 0–100%
3Red 000 255 0–100%
4Green 000 255 0–100%
5Blue 000 255 0–100%
6Amber 000 255 0–100%
000 009 No function
010 099 Strobe, slow to fast
7Strobe
8 Color macros
100 109 No function
110 179 Lightning strobe, slow to fast
180 189 No function
190 255 Random strobe
000 010 No function
011 030 Red: 100% Green: Up Blue: 0%
031 050 Red: Down Green: 100% Blue: 0%
051 070 Red: 0% Green: 100% Blue: Up
091 110 Red: Up Green: 0% Blue: 100%
111 130 Red: 100% Green: 0% Blue: Down
131 150 Red: 100% Green: Up Blue: Up
151 170 Red: Down Green: Down Blue: 100%
171 195 All LED at full output
196 199 3200K
200 203 3400K
204 207 3500K
208 211 4000K
212 215 4200K
216 219 4500K
220 223 4900K
224 227 5600K
228 231 6000K
232
236 239 7200K
240 243 8000K
244 247 8500K
248 255 1000K
235 6500K
COLORdash Accent 3 User Manual Rev. 3
Page 12 of 20
Page 16
Channel Function Value Percent/Setting
000 040 No function
041 050 Auto 1
051 060 Auto 2
061 070 Auto 3
071 080 Auto 4
081 090 Auto 5
091 100 Auto 6
101 110 Auto 7
111 120 Auto 8
121 130 Auto 9
9 Auto programs
10 Dimmer speed
131 140 Auto 10
141 150 Program 1
151 160 Program 2
161 170 Program 3
171 180 Program 4
181 190 Program 5
191 200 Program 6
201 210 Program 7
211 220 Program 8
221 230 Program 9
231 240 Program 10
241 255 Auto speed adjustment
000 009 Preset dimmer speed from display menu
010 029 Dimming curve Off
030 069 Dimmer 1 (fastest)
070 129 Dimmer 2
130 189 Dimmer 3
190 255 Dimmer 4 (slowest)
Operation
Basic (4 Channels)
Channel Function Value Percent/Setting
1Red 000 255 0–100%
2Green 000 255 0–100%
3Blue 000 255 0–100%
4Amber 000 255 0–100%
Page 13 of 20
COLORdash Accent 3 User Manual Rev. 3
Page 17
Operation
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
Static Colors
The Static Colors mode allows for permanent color presets without a DMX controller.
1. Go to the Static Colors main level.
2. Select Preset Colors or Manual Color.
3. For Preset Colors:
a. Select the desired preset color (R, G, B, A, RG, RB, RA, GB, GA, AB, RGB, RGA, GBA, or
RGBA).
For Manual Color:
a. Select the desired color (Red, Green, Blue, or Amber).
b. Set the desired value for the selected color (0–255).
c. Repeat steps a-b until the static color is set as desired.
Automatic Programs
The Auto Programs mode allows for playing back preset or customizable programs.
Run
To run a preset or customized automatic program:
1. Go to the Auto Programs main level.
2. Select Run.
3. Select the desired program (AUTO. 1–10 or User Program 1–10).
4. Set the desired run speed (0–100).
Edit
To edit a customizable auto program:
1. Go to the Auto Programs main level.
2. Select Edit.
3. Select the desired program (User Program 1–10).
4. Select the desired scene (Scene 01–30).
5. Select the desired color or setting (Red, Green, Blue, or Amber).
6. Set the desired value for the selected option (0–255).
7. Repeat steps 4-6 until the scene is set as desired.
COLORdash Accent 3 User Manual Rev. 3
Page 14 of 20
Page 18
Operation
Configuration (Settings)
Master/Slave
The Master/Slave mode allows a group of COLORdash Accent 3 products (the slaves) to simultaneously
duplicate the output of another COLORdash Accent 3 (the master) without a DMX controller. To set each
of the slaves:
1. Go to the Master/Slave main level.
2. Select Slave.
To set the master:
1. Go to the Master/Slave main level.
2. Select Master.
3. Select a static setting.
• The master is the one that runs a program whether in Auto or Static mode.
• Do not connect a DMX controller to the products configured for Master/Slave operation.
The DMX controller may interfere with signals from the master.
• The master should be the first product in the daisy chain.
Dimmer Profiles
This setting determines how fast the output of the COLORdash Accent 3 changes when you modify the
output value. This setting provides four different options to simulate the dimming curve of an incandescent
lighting product.
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (OFF, DIM1, DIM2, DIM3, or DIM4).
Off: The output is proportional (linear) to the dimmer channel value.
DIM1–4: The output follows the dimmer value based on the corresponding dimmer curve, DIM1
being the fastest.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the
COLORdash Accent 3.
1. Go to the LED Frequency main level.
2. Select PWM Frequency (600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25000Hz).
DMX Error/Loss
This option determines what happens if a DMX signal is lost or an error occurs.
1. Go to the Setting main level.
2. After being prompted to enter the passcode, press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
3. Select DMX Error/Loss.
4. Select Hold Last (continues the last received command) or Blackout (blacks out the product).
Page 15 of 20
COLORdash Accent 3 User Manual Rev. 3
Page 19
Operation
Calibration
This option allows users to customize color temperature output.
1. Go to the Setting main level.
2. After being prompted to enter the passcode, press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
3. Select Calibration.
4. Select the desired color temperature (3200K, 3400K, 3500K, 4000K, 4200K, 4500K, 4900K,
5600K, 6000K, 6500K, 7200K, 8000K, 8500K, or 10000K).
5. Select the desired color (Red, Green, Blue, or Amber).
6. Set the desired value for the selected option (0–255).
7. Repeat steps 4–6 until desired color calibration is achieved.
Display Timeout
This setting allows for selection of the amount of time the display backlight on the COLORdash Accent 3
stays on after the last button is pressed on the control panel.
1. Go to the Setting main level.
2. After being prompted to enter the passcode, press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
3. Select Display Backlight.
4. Select On (remains on), 10s (10 seconds), 30s (30 seconds), or 2Min (2 minutes).
Passcode
This option activates/deactivates the password requirement for changing the unit’s settings.
1. Go to the Setting main level.
2. After being prompted to enter the passcode, press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
3. Select Passcode.
4. Select On (passcode is required) or Off (passcode is not required).
System Information
This option displays the total number of hours the product has run, the installed software version, the
product’s temperature, and the product’s UID.
1. Go to the Information main level.
2. Select Fixture Hours, Temp eratu r e, Firmware Version, Device Label, or Device UID.
Factory Reset
This option restores the COLORdash Accent 3 to factory default settings.
1. Go to the Factory Reset main level.
2. After being prompted to enter the passcode, press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
3. Select No (keep current settings) or Yes (reset to default factory settings).
COLORdash Accent 3 User Manual Rev. 3
Page 16 of 20
Page 20
Maintenance
5. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
your lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Page 17 of 20
COLORdash Accent 3 User Manual Rev. 3
Page 21
Technical Specifications
UL 1573
CSA C22.2 No. 166
E113093
R
6. Technical Specifications
Dimensions and Weight
Length Width Height Weight
6.42 in (163 mm) 5.54 in (133 mm) 3.13 in (80 mm) 2 lb (0.9 kg)
Note: Dimensions in inches are rounded.
Power
Power Supply Type Range Voltage Selection
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
Parameter 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz
Consumption 17 W 16 W 16 W
Operating current 0.136 A 0.081 A 0.078 A
Power I/O U.S./Worldwide UK/Europe
Power input connector Hardwired Hardwired
Power output connector Hardwired Hardwired
Power cord plug Edison (U.S.) Local Plug
Light Source
Type Color Quantity Power Current Lifespan
LED
Photometrics (without Filter)
Installed
Optics
7° 14° 9° 27° 16° 175 lux 486 lux
Thermal
Maximum External Temperature Cooling System
Control
5-pin XLR DMX input and output cable whips 4, 7, or 10 channels
Ordering
Product Name Item Name Item Code UPC Number
COLORdash Accent 3
Beam Angle
113 °F (45 °C) Convection
quad-color
RGBA
(w/ filter)
I/O Connector Channel Range
Beam Angle
(w/o filter)
COLORDASHACCENT3
1 20 W 950 mA 50,000 hours
Field Angle
(w/ filter)
Field Angle
(w/o filter)
01031570 781462219185
Illuminance @
5 m (w/ filter)
Illuminance @
5 m (w/o filter)
COLORdash Accent 3 User Manual Rev. 3
Page 18 of 20
Page 22
Returns
Returns
Send the product prepaid, in the original box, and with the original packing and accessories. Chauvet will
not issue call tags.
Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping the product.
Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the
return.
To submit a service request online, go to www.chauvetprofessional.com/service-request
Clearly label the package with an RMA number. Chauvet will refuse any product returned without an RMA
number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly
on the box.
Before sending the product, clearly write the following information on a piece of paper and place it inside
the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be
your responsibility. FedEx packing or double-boxing are recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).
.
Page 19 of 20
COLORdash Accent 3 User Manual Rev. 3
Page 23
Contact Us
Contact Us
Chauvet World Headquarters
Chauvet Europe Ltd
Chauvet Europe BVBA
Chauvet France
Chauvet Germany
Chauvet Mexico
Address: Av. de las Partidas 34 - 3B
Lerma, Edo. de México, CP 52000
General Information Technical Support
Address: 5200 NW 108th Ave. Voice: (844) 393-7575
Sunrise, FL 33351 Fax: (954) 756-8015
Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com
Fax: (954) 929-5560
Toll Free: (800) 762-1084 Website: www.chauvetprofessional.com
Address: Unit 1C Email: UKtech@chauvetlighting.eu
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK Website: www.chauvetprofessional.eu
NG16 6NT
Voic e : +4 4 (0) 1 773 5 11115
Fax : +44 (0) 1 773 5 11110
Address: Stokstraat 18 Email: BNLtech@chauvetlighting.eu
9770 Kruishoutem
Belgium Website: www.chauvetprofessional.eu
Voice: +32 9 388 93 97
Address: 3, Rue Ampère
91380 Chilly-Mazarin
France Website: www.chauvetprofessional.eu
Voice: +33 1 78 85 33 59
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany Website: www.chauvetprofessional.eu
Voice: +49 421 62 60 20
(Entrance by Calle 2)
Zona Industrial Lerma Website: www.chauvetprofessional.mx
Voice: +52 (728) 690-2010
Email: FRtech@chauvetlighting.fr
Email: DEtech@chauvetlighting.de
Email: servicio@chauvet.com.mx
Visit the applicable website above to verify our contact information and instructions to request support.
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record.
COLORdash Accent 3 User Manual Rev. 3
Page 20 of 20
Loading...