How it Works
Chauvet DJ
Loading...
#
A
B
C
Loading...
Loading...
ABYSS USB
User Manual
48 pgs1.12 Mb0
Users Manual
18 pgs608.49 Kb0
Table of contents
Loading...

Chauvet DJ ABYSS USB Users Manual

Download
User Manual
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
Claims ..................................................................................................................................................... 3
2. Introduction ................................................................................................................... 5
3. Setup .............................................................................................................................. 7
Power Linking ......................................................................................................................................... 7
Orientation .............................................................................................................................................. 8
Rigging ................................................................................................................................................... 8
4. Operation ....................................................................................................................... 9
Configuration (DMX) ............................................................................................................................. 10
DMX Personality and Starting Address ................................................................................................. 10
3-CH ..................................................................................................................................................... 10
Configuration (D-Fi USB) ...................................................................................................................... 11
Color Wheel .......................................................................................................................................... 12
Wave Effect Wheel ............................................................................................................................... 12
Dimmer ................................................................................................................................................. 12
Temperature ......................................................................................................................................... 12
IRC-6 Operation.................................................................................................................................... 13
5. Maintenance .................................................................................................................15
6. Technical Specifications ..............................................................................................16
Returns .............................................................................................................................17
Contact Us .........................................................................................................................18
Page 2 of 18 Abyss USB User Manual Rev. 1

1.BEFORE YOU BEGIN

What Is
Included

Hardware
• Power Cord

Unpacking
Instructions

product immediately and check the container to make sure all the
If the box or the contents (the product and included accessories) appear damaged from
Text
1—512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected

Symbols

Critical installation, configuration, or operation information. Not damage to the product, or cause harm to the operator.

Disclaimer

that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility and specifically disclaims any and all liability

Claims

Conventions
• Abyss USB
• Mounting Bracket with Mounting
Carefully unpack the parts are in the package and are in good condition.
shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may inv alidate y our claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Convention Meaning
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to the product, accessories, or the user.
• Warranty Card
• Quick Reference Guide
following these instructions may make the product not w ork, c ause
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
Chauvet believes to any party for any loss, damage or disruption caused by any errors or omissions in this
document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetlighting.com.
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
© Copyright 2015 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, “Abyss USB”, and “D-Fi
trademarks of Chauvet & Sons Inc. (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. herein may be trademarks of their respective companies .
Author Date Editor Updated
R. Isenstadt 08/27/15 M. Gregory 08/27/15
Other company and product names and logos referred to
USB” are registered trademarks or
Abyss USB User Manual Rev. 1 Page 3 of 18
Product at a
x
x
x
P
x
P
P
x
Master/Slave
P

Safety Notes

Do not touch the product’s housing when operating because it may be very hot.
completely disconnect the product from power via breaker or by unplugging it.
Glance
Use on Dimmer Outdoor Use Sound-Active DMX
Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about instal lation, usage, and maintenance.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing
the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
•
• The product is not intended for permanent installation.
• Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
Auto Programs Auto-ranging Power Supply Replaceable Fuse User-Serviceable
Keep this User Manual for future use. If you sell the product to someone else, b e sure that they also receive this document.
Page 4 of 18 Abyss USB User Manual Rev. 1

2. INTRODUCTION

Product Overview

USB into the USB port. Doing so may
Power In
D-Fi USB
Port
Fuse Holder
IR Sensor
DMX
In/Out
Lens
Display
Menu
Buttons
Power Out
Safety Loop
Abyss USB User Manual Rev. 1 Page 5 of 18
WARNING! DO NOT plug anything other than a D-Fi cause damage to the product.

Product Dimensions

9.7 in
246 mm
7.7 in
195 mm
9 in
228 mm
Page 6 of 18 Abyss USB User Manual Rev. 1

AC Power

The Abyss USB has an auto-ranging power supply and it can work with an input voltage
power requirements
circuit breaker, power outlet, and wiring), use the current value listed on the label affixed
’s specifications chart. The listed current
rating indicates the product’s average current draw under normal conditions.
• Always connect the product to a protected circuit (circuit breaker or fuse).
has an appropriate electrical ground to avoid the risk
periods of
use completely disconnect the product from power via breaker or by
unplugging it.
to a rheostat (variable resistor) or dimmer circuit, even if
Fuse
1. Wedge the tip of a flat-head screw driver into t he slot of the f us e holder.
4. Insert the fuse holder back in place and recon nect power.

Power Linking

in other markets, you must consult with the
1st Product
2nd Product
3rd Product
Additional
Products
Installed fuse (held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap

3. SETUP

Replacement
range of 100 to 240 VAC, 50/60 Hz. To determine the product’s ( to the product’s back panel, or refer to the product
Make sure the product of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during non-
Never connect the product the rheostat or dimmer channel serves o nly as a 0 t o 100% switch.
2. Pry the fuse holder out of the housing.
3. Remove the blown fuse from the holder and repla ce with a fuse of the exact same type and rating.
Disconnect the product from the power outlet before replacing the fuse.
Power Linking
The product provides power linking via the Edison outlet located in the back of the product. Please see the diagram below for further explanation.
Diagram
You can power link up to 14 Abyss USB products on 120 VAC or up to 27 Abyss USB products on 230 VAC.
The power linking diagram corresponds to the North American version of the product ONLY! If using the product local Chauvet distributor as powe r linking connectors and requirements may differ in your country or region.
Abyss USB User Manual Rev. 1 Page 7 of 18

Mounting

, read and follow the safety recommendations indicated in the
may be mounted in any position; however, make sure adequate
of appropriate weight
knobs allow for directional adjustment when aiming the
15N
Chauvet)
Hanging/Mounting
supports)
Bracket
x 2
Before mounting the product
Safety Notes.

Orientation

Rigging

The Abyss USB ventilation is provided around the product.
• Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and progr amming pur pose s.
• Make sure that the structure onto which you are mounting the product can support the product’s weight. See the T echnical Specif ications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elev at ed platform or a t r uss .
• When rigging the product onto a truss, use a mounting clamp capacity.
• When power linking multiple products, mount the products close enough for power linking cables to reach.
• The bracket adjustment product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Mounting Clamp
(such as the CLP-
from
Safety Cable
Bracket
(also used as floor
(such as CH-05 from Chauvet)
Mounting Diagram
Adjustment Knob
Page 8 of 18 Abyss USB User Manual Rev. 1

Control Panel
Operation

<ENTER>

Menu Map

Main Level
Programming Levels
Description
3-CH
d 1–d512
3-channel DMX mode
C 1
White Static Color
C 2
Purple Static Color
C 3
Yellow Static Color
C 4
Blue Static Color
C 5
Green Static Color
C 6
Orange Static Color
C L
L 0–L100
Left Color Wheel Rotation (slow to fast)
C r
r 0–r100
Right Color Wheel Rotation (slow to fast)
Stop
Stop Wave Effect Rotation
W--L
L 0–L100
Left Wave Effect Rotation (slow to fast)
W--r
r 0–r100
Right Wave Effect Rotation (slow to fast)
U--
U 0–U255
Dimmer
On
OFF
teMP
_ _
Displays the product’s current temperature

4. OPERATION

To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control panel.
Button Function
<MENU>
<UP>
<DOWN>
Press to find an operation mode or to back out of the current menu option
Press to scroll up the list of options or to find a higher value Press to scroll dow n the list of options or to find a lower value Press to activate a menu option or a selected value
C--
Wave
SET
IR function on or off
Abyss USB User Manual Rev. 1 Page 9 of 18

DMX Linking

The Abyss USB works with a DMX controller. Information about DMX is in the CHAUVET
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Configuration
Set the product in DMX mode to control with a DMX controller.
socket on the product.
DMX Personality
Starting
When selecting a starting DMX address, always consider the number of DMX channels the
you choose a starting address that is too high, you could
, which defines the highest
MX protocol, download the DMX Primer from
4. Press <ENTER>.

DMX Channel Assignments and V alues

Channel
Function
Value
Percent/Setting
1
Dimmer
000ó021
White
022ó042
Purple
043ó063
Yellow
064ó084
Blue
085ó105
Green
128ó188
Left rotation (fast to slow)
189ó194
Stop
195ó255
Right rotation (slow to fast)
000
Stop
123ó133
Stop
134ó255
Right rotation (fast to slow)
DMX Primer, which is available from the Chauvet website
and
(DMX)
Address

3-CH

1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of t he DMX contr oller to t he DM X input
selected DMX mode uses. If restrict the access to some of the product’s channel s. The Abyss USB uses 3 DMX channels in a 3-CH DMX mode configurable address to 510. If you are not familiar with the D
www.chauvetlighting.com.
To select the starting address, do the follow ing:
1. Press <MENU> repeatedly until 3-CH shows on the display.
2. Press <ENTER> and d 1–d512 w ill show on the display .
3. Use <UP> or <DOWN> to select the starting address.
000ó255 0–100%
2
Color Wheel
106ó127 Orange
3
Wave Effect Wheel
001ó122 Left rotation (slow to fast)
Page 10 of 18 Abyss USB User Manual Rev. 1
D-Fi USB
The Abyss USB is able to become a D-Fi wireless receiver/transmitter with the use of the
set the product's DMX Personality and DMX
D-Fi USB port.
USB into the USB port. Doing
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual
will be unavailable until you unplug the
D-Fi USB. The priority levels are:
1. D-Fi USB
3. IRC-6 Remote Control NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
RECEIVING
TRANSMITTING
Connectivity
Configuration
(D-Fi USB)
D-Fi USB DIP Switch
Channels
D-Fi USB from CHAUVET DJ. Simply Address, set the DIP switch D-Fi receiving/transmitting channel, then plug it into the
WARNING! DO NOT plug anything other than a D-Fi so may cause damage to the product.
display control/menu buttons and IRC-6
2. Wired DMX
1. Set the DMX Personality and DMX address on your product.
2. Use the Chart provided to set BOTH:
• the Channel, and then
• the Receiving or Transmitting option.
4. Manual Digital Display/Menu Buttons
Abyss USB User Manual Rev. 1 Page 11 of 18

Configuration
(Standalone)

to a DMX string
s in standalone mode may transmit DMX
To set the position or the rotation direction and speed of the color wheel on the Abyss
<ENTER>
Wave Effect
USB, do t he
<ENTER>
4. Press <ENTER>.

Temperature

To view the product’s current temperature, do the fol lowing:
<ENTER>
Set the product in one of the standalone mo des to c ont rol without a DMX controller.
• Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode connected to a DMX controller. Product signals that could interfere with the DMX signals from the controller.

Color Wheel

Wheel
USB, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select one of the following:
• C 1 (static white)
• C 2 (static purple)
• C 3 (static yellow)
• C 4 (static blue)
• C 5 (static green)
• C 6 (static orange)
• C L (left rotation)
or
• C r (right rotation)
4. Press <ENTER>.
5. For C L or C r, use <UP> and <DOWN> to increase or decrease the rotation speed.
6. Press
.
To set the rotation direction and speed of the wave effect wheel on the Abyss following:
1. Press <MENU> repeatedly until Wave shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select one of the following:
• Stop (no rotation)
• W--L (left rotation)
or
• W--r (right rotation)
4. Press <ENTER>.
5. For W--L or W--r, use <UP> and <DOWN> to increase or decrease the rotation speed.
6. Press
.

Dimmer

To set the total output level of the Aby ss USB, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to increase or decrease the total output level.
1. Press <MENU> repeatedly until teMP shows on the display.
2. Press
.
Page 12 of 18 Abyss USB User Manual Rev. 1
IRC-6 Infrared
Remote
The Abyss USB is compatible with the IRC-6 infrared remote control from Chauvet. To

IRC-6 Operation

Color Wheel
have inadvertently activated Black Out.
activate IR mode, follow the instructions below:
1. Press <MENU> repeatedly until SET show s on the display .
Control
2. Press <ENTER> to accept.
3. Press <UP> or <DOWN> to select On or OFF.
4. Press <ENTER>.
To set the color wheel rotation direction:
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to toggle the direction.
To set the color wheel rotation speed:
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to increase or decrease the rotation speed.
To set a static color:
• For white, press <1> on the IRC-6.
• For purple, press <2> on the IRC-6.
• For yellow, press <3> on the IRC-6.
• For blue, press <4> on the IRC-6.
• For green, press <5> on the IRC-6.
• For orange, press <6> on the IRC-6.
Wave Effect Wheel
To set the wave effect wheel rotation direction:
1. Press <SOUND> on the IRC-6.
2. Press <+> or <–> to toggle the direction.
To set the wave effect wheel rotation speed:
1. Press <SENSITIVITY> on the IRC-6.
2. Press <+> or <–> to increase or decrease the rotation speed.
Dimmer
To adjust the dimmer level:
1. Press <MANUAL> or <W> on the IRC-6 for full dimmer control, or Press <%> on the IRC-6 for 10-step dimmer control.
2. Press <+> or <–> to increase or decrease the dimmer level.
Black Out
To black out the light:
Press <BLACK OUT> on the IRC-6.
This will turn off the light until the button is pressed again. NOTE: The IRC will not respond to any inputs when Black Out is activated. If the remote
does not respond when a button is pressed, try pressing <BLACK OUT>. You may
All other buttons on the IRC-6 infrared remote control have no function with this product.
Abyss USB User Manual Rev. 1 Page 13 of 18
Master/Slave
(the master) to control the
s (the slaves) without the need of a DMX
s will be set to operate in Slave mode. Once set and
s before connecting the master to the daisy
Never connect a DMX controller to a DMX string configured for Master/Slave
Master/Slave
or DMX
s will be set to operate in Slave mode.
configured for Master/Slave
The Master/Slave mode allows a single Abyss USB product
Mode
(wired)
actions of one or more Abyss USB product controller. The master product will be set to operate in either Stand-Alone mode or with the IRC-6, while the slave product connected, the slave products will operate in unison with the master product.
Configure the products as indicated below .
Slave products:
1. Press <MENU> repeatedly until 3-CH shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4. Connect the DMX input of the first slave product to the DMX output of the master product.
5. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product.
6. Finish setting and connecting all the slave products.
Master product:
1. Set the master product in Stand-Alone mode or with the IRC-6.
2. Make the master product the first product in the D M X daisy chain.
• Configure all the slave product
chain.
•
operation because the controller may interfere with the signals from the master .
• Do not connect more than 31 slaves t o th e master .
The D-Fi USB allows a single Aby ss U S B product (the master) to control the actions of one
Mode
(D-Fi USB)
or more Abyss USB products (the slaves) without the need of a DMX controller cables. The master (transmitter) product will be set to operate in either Stand-Alone mode or with the IRC-6, while the slave (receiver) product Once set and connected, the slave products will operate in unison with the master product.
Configure the products as indicated below .
Slave products:
1. Press <MENU> repeatedly until 3-CH shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4. Set the D-Fi USB to receive on a specific chann el, 1–16.
5. Plug in the D-Fi USB.
6. Finish setting and connecting all the slave products.
Master product:
1. Press <MENU> repeatedly until 3-CH shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4. Set the master product in Stand-Alone mode or with the IRC-6.
5. Set the D-Fi USB to transmit on the D-Fi channel the slaves are receiving on.
6. Plug in the D-Fi USB.
• All products must be set to the same DMX personality, DMX address, and D-Fi
channel.
• Configure all the slave products before configuring the master to transmit.
• Never connect a DMX controller to a D-Fi channel
operation because the controller may interfere with the signals from the master.
Page 14 of 18 Abyss USB User Manual Rev. 1
Product
up reduces light output performance and can cause overheating. This can lead
mechanical wear. To maintain optimum
s at least twice a month.
However, be aware that usage and environmental conditions could be contributing factors

5. MAINTENANCE

Dust build-
Maintenance
to reduction of the light source’s life and/or performance and minimize wear, clean your lighting product
to increase the cleaning frequency. To clean the product, follow the instructions below:
1. Unplug the product from pow er .
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the tra nsp arent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully af ter cleaning them.
the external surface/vents.
cleaner, or isopropyl alcohol.
Abyss USB User Manual Rev. 1 Page 15 of 18
Dimensions and
Length
Width
Height
Weight
7.7 in (195 mm)
9 in (228 mm)
9.7 in (246 mm)
5.8 lb (2.7 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 VAC, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
38 W
37 W
Operating Current
0.5 A
0.3 A
Power linking current
(products)
Fuse
T 1 A, 250 V
T 1 A, 250 V
Power I/O
U.S./Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (U.S.)
Local plug
Light Source
Type
Power
Lifespan
LED
30 W
50,000 hours
Color
Quantity
Current
Cool white
1
7 A
Photometrics
Parameter
Coverage Angle
59°
Illuminance @ 2 m
715 lux
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Fan-assisted Convection
DMX
I/O Connectors
Channel Range
3-pin XLR 3
Ordering
Product Name
Item Code
UPC Number
Abyss USB
03051059
781462214074

6. TECHNICAL SPECIFICATIONS

Weight
8 A (14 products) 8 A (27 products)
Page 16 of 18 Abyss USB User Manual Rev. 1
R
In case you need to get support or return a product:
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your products to them. Visit our website www.chauvetlighting.com for contact details.
Call the corresponding Chauvet Technical Support office and request a Return
returned without an RMA number.
Before sending the product, clearly write the following information on a piece of paper
recommended.
ETURNS
• If you are located in the U.S., contact Chauvet World Headquarters.
• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact
your local distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, Ireland, Mexico, or Benelux.
distributor of record and follow their instructions on how to return Chauvet
Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause for the return. Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet will not issue call tags. Clearly label the package with the RMA number. Chauvet will refuse any product
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
and place it inside the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief descriptio n of the prob l em
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are
Chauvet reserves the right to use its own discretion to repair or replace returned product(s).
Abyss USB User Manual Rev. 1 Page 17 of 18
C
USA WORLD HEADQUARTERS
General Information – Chauvet
Technical Support
www.chauvetlighting.com
EUROPE
General Information - Chauvet Euro pe BVBA
Technical Support
General Information - Chauvet Europe Ltd.
Technical Support
MEXICO
General Information - Chauvet Mexico
Voice: +52 (728) 285-5000
Technical Support
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of
product. Visit our
website for contact details.
ONTACT
US
Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084
Address: Stokstraat 18 9770 Kruishoutem Belgium Voice: +32 9 388 93 97
Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115 Fax: +44 (0)1773 511110
Address: Av. Santa Ana 30 Parque Industrial Lerma Lerma, Mexico C.P. 52000
Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com
World Wide Web
Email: Eutech@chauvetlighting.eu
World Wide Web
www.chauvetlighting.eu
Email: uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
Email: servicio@chauvet.com.mx World Wide Web
Page 18 of 18 Abyss USB User Manual Rev. 1
record. Follow their instructions to request support or to return a
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use