Page 1
Quick Reference Guide
Page 2
Q-Beam 260-LED QRG
Page 2 of 8
About this
Guide
The Q-Beam 260-LED Quick Reference Guide (QRG) only cont ains the
product
’s connectio n and m ounting informat io n as well as th e m enu options
and the DMX values.
Disclaimer
• This Quick Reference Guide DOE S NOT re place the product’s user
manual, which you can download from the CHAUVET® Web site
(www.chauvetlighting.com).
•
You must read ALL the disclaimers and safety notes in this document as
well as those in the product’s user manual before installing, operating,
or maintaining th i s product .
Safety Notes
• DO NOT open this fixture unless instructed. It contains no user
serviceable parts.
•
DO NOT aim this fixture toward the Sun. Otherwise, the lenses could
concentrate the sol ar ener gy and cau se internal ove rhe ating.
• DO NO T l ook at the light source when t his fi xture i s on.
•
DO NOT touch the fixture when it is operating because it may be hot.
•
DO NO T cover the ve ntil ation slot s when t he fixture is ope r ating to
avoi d internal ove rheating.
•
DO NOT i n s tall or operate this fixture wh ere there is less tha n 5 0 cm to
the nearest surface to allow adequate ventilation around it.
•
DO NOT lea ve an y flammable materi al wi th in 50 cm from this fixtu r e
while operatin g or connec ted t o t he power out l et to minimize t he risk of
fire.
•
DO NOT carry this fixture from the head; use the handle s instead.
•
DO NOT mount this fixture overhead without using a safety cable.
•
DO NO T operate this fi xture outd oors or in any location w here dust,
excessive heat, water, or humidity may affect it.
• DO NOT operate this fixture if you see damage on the housi ng, le nses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized techni cian at once.
• DO NO T conne ct thi s f ixture to a dimme r or rheostat.
•
ONLY c onne ct this fi xture to a grounde d and protected circuit.
Wha t is
Included
• One Q-Beam 260-LED
• One IEC power cord with Edison plug (US market)
• One safety cable
• Two omega brackets
• One Warranty Card
• One Quick Reference Guide
Page 3
Q-Beam 260-LED QRG
Page 3 of 8
Features
• 9 or 12-channel DMX-512 LED moving yoke
• Pan: 540°
• Tilt: 270°
• Color wheel:
8 col ors + white
Rainb ow color spin at variable s peed s
• Gobo wheel 1:
Gobo shake
Indexing
Gobo rota tion
7 gobos + ope n
Gobo whee l spi n at variable spe eds
• 3-facet, static prism
• Variab le electronic strobe
• Variable electronic dimmer (0~100%)
• Rem ote fixture reset
• 255 user-programma b le ste p s without DMX controller
• Move-in-black for pan/tilt
• Built-in automated programs
• Built-in sound a ct ivated pr ograms
• High-powe red , 60 W (12.6 A) LED
• User-selectable pan/tilt ranges
• Automatic pan & tilt correction
• Reset to factory settings opt ion
• User-sele ct able basic or ad vance d oper a ting D MX mode s
Page 4
Q-Beam 260-LED QRG
Page 4 of 8
AC Power
This product has an auto-ranging power supply that can work with an input
voltage ran ge of 100~ 240 VAC, 50/60 Hz.
Fuse
Replacement
1) Disconnect the unit from the power outlet.
2) With a flat head screwdriver, wedge the fuse holder out of its housing
and remove the blown fuse from its holder.
3) Replace the blown fuse with a fuse of the exact same type and rating.
4) Insert the fuse holder back in its place, and reconnec t power .
Mounting
Bef ore mou n t i ng t h is pr od u ct, r ea d t he s af et y not e s at th e be gin ni ng of t hi s
g
uide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapte r of the user manual.
Product
Mounting
Diagram
Control Panel
Description
Button Function
<MENU>
Exits fr om the current menu or fun ct ion
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwa rd s th ro ugh the menu list and inc rea ses the
num eric value when in a function
<DOWN>
Navigates d ow nwards through the menu lis t and d ecreases
the numeric value when in a function
Programming
For details on how to program this product, please refer to the product’s
user manu al.
Password
Aft er being pr om pte d to ent er the password , press:
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
Floor
Mounting
Overhead
Mounting
C Clamps (not included)
Safety cable (included)
Omega brackets (included)
Page 5
Q-Beam 260-LED QRG
Page 5 of 8
Menu Options
Main Level
2nd Level
3rd Level
Description
1. Intro
Address
001~512
Selec t s a star t i n g D MX address
Reset
No/Yes
Resets the fixture’ s custom settings
Run
DMX512
Selects DMX512-A runni ng mode
Auto 1
Selects the first autom ati c program
Auto 2
Selects the second automati c program
Sound 1
Selects the first sou nd act iv ated program
Sound 2
Selects the second sound program
Custom
Selects the user customizab le program
Test
Selects the fixture’s test sequen ce
Slave
Selects the Slave run ni ng mode
Channels
Basic
Selects the 9-channel DMX mode
Advanced
Selects the 12-channel DMX mode
Display
60 Close
Turns off the display after 60 s
Bright
Keeps the display on
Keylock
No/Yes
Activate s the control panel password
Info
Edition
Shows t he version of t he i nstall ed S/ W
2. Invert
Pan
Normal/Reverse
Defines t he pan direction
Tilt
Defines the tilt direction
Color
Step
The color wheel moves in st eps
Linear
The color wheel moves smoothly
Use
No/Yes
Activates the changes
3. Range
P/Start
000~255
Sets th e pan start p oin t (rest ri cted rang e)
P/Finish
Sets the pan end point (restricted range)
T/Start
Sets the tilt start point (restricted range)
T/Finish
Sets the tilt end point (restricted range)
Use
Activates the changes
4. Special
Black delay
No/Yes
Activate s the move-in bl ack d elay (3 s)
Reset
DMX
The D M X contr oller can reset the f ixtu re
System
The control panel can reset t he fixture
5. Edit
Step
000~255
Selects the program s tep
Pan
Selects the pan posit io n
Tilt
Selects the tilt position
Speed
Selects the pan/tilt speed
Color
Selects the col or (colo r wheel)
Gobo 1
Selec t s a r otat i n g go b o ( s t ati c or s h a k e )
Gobo 1 Rot
Selects the gob o rotation mode
Dimmer
Selects the dimm er valu e
Strobe
Selects the str ob e fr equen cy and m ode
Time
Selects the step du rat ion
Use
No/Yes
Activates the changes
6. Defaul t
Default
Defaults the fixt ure to factor y settings
Page 6
Q-Beam 260-LED QRG
Page 6 of 8
DMX Values
BASIC
Channel
Function
Value
Percent/Setting
1
Pan
000 ó 255
0~540º
2
Tilt
000 ó 255
0~270º
3 Color Wheel
000 ó 015
016 ó 030
031 ó 045
046 ó 060
061 ó 075
076 ó 090
091 ó 105
106 ó 120
121 ó 235
136 ó 255
White
Red
Yellow
Magenta
Green
Orange
Blue
Light green
Light blue
Rai nb ow or li nea r e f f ec t
4 Gob o Wh e e l
000 ó 010
011 ó 020
021 ó 030
031 ó 040
041 ó 050
051 ó 060
061 ó 070
071 ó 080
081 ó 095
096 ó 110
111 ó 125
126 ó 140
141 ó 155
156 ó 170
171 ó 185
186 ó 255
No gobo
G obo 1
Gobo 2
G obo 3
G obo 4
G obo 5
G obo 6
G obo 7
Shaking gobo 7
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Fl ow e ffec t
5
Gob o Wh e e l
Rotation
000 ó 060
061 ó 150
151 ó 165
166 ó 255
360º Indexing
CW rotation (slow ~fast)
No function
CCW rotation (slow~ fast)
6 Prism
000 ó 127
128 ó 255
Pris m off
Pr ism on
7
Dimmer
000 ó 255
Dark ó Bright
8 Shutter/Strobe
000 ó 031
032 ó 063
064 ó 095
096 ó 127
128 ó 159
160 ó 191
192 ó 223
224 ó 255
Close
Open
Stro be (Slow ~Fast)
Open
Pulse str obe effec t (Slow~Fast)
Open
Random st robe eff ect (S low~Fast)
Open
Continue s on the ne xt page
Page 7
Q-Beam 260-LED QRG
Page 7 of 8
Continued from previous page
BASIC
(Cont.)
Channel
Function
Value
Percent/Setting
9 Control
000 ó 019
020 ó 039
040 ó 059
060 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 189
190 ó 199
200 ó 219
220 ó 255
No function
Pan/ti l t bl ack act i vation (3 s d el ay)
Pan/ti l t bl ack d eactivation (3 s delay)
No function
Auto 1 (3 s del ay )
Auto 2 (3 s del ay )
Test (3 s del a y)
Custom
Sound 1(3 s del a y)
Sound 2(3 s delay)
Reset (3 s delay)
No function
ADVANCED
Channel
Function
Value
Percent/Setting
1
Pan
000 ó 255
0~540º
2
Pan Fine
000 ó 255
Fine movement contr ol
3
Tilt
000 ó 255
0~270º
4
Tilt Fine
000 ó 255
Fine movement contr ol
5
Pan/Tilt Speed
000 ó 255
Fast~Slow
6 Color Wheel
000 ó 015
016 ó 030
031 ó 045
046 ó 060
061 ó 075
076 ó 090
091 ó 105
106 ó 120
121 ó 235
136 ó 255
White
Red
Yellow
Magenta
Green
Orange
Blue
Light green
Light blue
Rai nb ow or li nea r e f f ec t
7 Gob o Wh e e l
000 ó 010
011 ó 020
021 ó 030
031 ó 040
041 ó 050
051 ó 060
061 ó 070
071 ó 080
081 ó 095
096 ó 110
111 ó 125
126 ó 140
141 ó 155
156 ó 170
171 ó 185
186 ó 255
No gobo
G obo 1
G obo 2
G obo 3
G obo 4
G obo 5
G obo 6
Gobo 7
Shaking gobo 7
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Fl ow e ffec t
Continue s on the ne xt page
Page 8
Q-Beam 260-LED QRG
Page 8 of 8
Continued from previous page
ADVANCED
(Cont.)
Channel
Function
Value
Percent/Setting
8
Gobo Wheel
Rotation
000 ó 060
061 ó 150
151 ó 165
166 ó 255
360º Indexing
CW rotation (slow ~fast)
No function
CCW rotation (slow~ fast)
9 Prism
000 ó 127
128 ó 255
Pris m off
Pr ism on
10
Dimmer
000 ó 255
Dark ó Bright
11 Shutter/Strobe
000 ó 031
032 ó 063
064 ó 095
096 ó 127
128 ó 159
160 ó 191
192 ó 223
224 ó 255
Close
Open
Stro be (Slow ~Fast)
Open
Pulse str obe effec t (Slow~Fast)
Open
Random st robe eff ect (S low~Fast)
Open
12 Control
000 ó 019
020 ó 039
040 ó 059
060 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 189
190 ó 199
200 ó 219
220 ó 255
No function
Pan/ti l t bl ack act i vation (3 s d el ay)
Pan/ti l t bl ack d eactivation (3 s delay)
No function
Auto 1 (3 s del ay )
Auto 2 (3 s del ay )
Test (3 s del a y)
Custom
Sound 1(3 s delay)
Sound 2(3 s delay)
Reset (3 s delay)
No function
Contact Us
World Headquarters
General Infor m atio n CHAUVET®
5200 NW 108
th
Avenue
Sunrise, FL 33351
Voice: (954) 929-1115
Fax: (954) 929-5560
Toll free: (800) 762-1084
Technica l Supp ort Voice: (954) 929-1115 (Press 4)
Fax: (954) 756-8015
World Wide Web www.chauvetlighting.com
Q-Beam 260 -LED QRG – Rev. 0 2
© Copyright 2011 CHAUVET®
All rights reserved
Printed in the P. R. C.
Loading...