Chauvet PC-08 User Manual
If you like this product then why not take a look at some of
the other items available from
OCTOPUS
32 multicoloured beams
rotate back and forth to
the beat of the music…
600W of Pure Power!
COMET
52 multicolored beams rotate
and cross slowly……..
Great Atmosphere
Creator!
PP
PP
oo
oo
ww
ww
eerrrr
ee
PC-08
Users Guide
PP
PP
aa
aa
nn
nn
eellll
ee
ALIEN
12 colored laser sharp beams rotate
o
360
at a speed controlled by you…
Looks Incredible At Any Speed!
Remember if you’re looking for lights – Ask for CHAUVET !
Please read these instructions carefully before use
World-wide Headquarters:
3000 North 29th Ct., Hollywood, Florida, USA, FL 33020
Tel: +1-954-929-1115 Fax: +1-954-929-5560
European Office:
Unit 18, Hunslet Trading Estate, Leeds, UK
LS10 1BL
Tel: (0113) 276-0755 Fax: (0113) 277-6675
www.ChauvetLighting.com
Circuit Breaker Reset
A
g
19” Rack Mount
Channel Switches
t the Rear:
⇒ Power Sockets
⇒ Power Cable
Troubleshooting
• If the unit is not functional – check main power supply is ‘on’ and check any fuses.
• If the unit continually trips the circuit breaker – check the rating of the load and wiring.
If after trying this solution you still have a problem contact your dealer or CHAUVET.
Caution
No user serviceable parts inside, please refer to CHAUVET for service.
Fi
.1
Introduction
Congratulations on the purchase of your new CHAUVET lighting controller. We are confident you
will enjoy many trouble free hours with this unit. To assist with the care and use of the product we
have prepared this short guide.
Operation
This lighting controller has been designed to function on a mains power supply of either
120V~60Hz or 230V~50Hz and has been fitted with a suitable power plug for use with your local
voltage. Check the label on the unit and the power plug for the correct voltage.
The unit has been designed to independently switch on/off up to eight lighting fixtures via the
power sockets at the rear. Simply plug each item into the appropriate socket using the
appropriate power plug and away you go!
For your protection the power panel has been fitted with a 15A circuit breaker which will
disconnect the main power supply to the outputs should you either overload the unit or if there is
a power surge. In such circumstances it is necessary to press the reset button to re-activate the
power to the controller.
Installation / Mounting
This controller may be used either seated on a level surface or mounted into an appropriate 19”
(1U space required) rack cabinet. For reasons of safety it is best to secure the unit into a rack or
suitable mounting so that cables cannot be pulled out of the panel.
Cleaning
Power Connections
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other
connections be required they must be carried out with the following configuration.
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.
In the UK, it is required that all mains plugs are fitted with 13A fuses.
Technical Specifications
Power 120V~60Hz AC 230V~50Hz AC
Load Capacity 15A
Circuit Breaker 15A Reset Switch 15A Reset Switch
Power Outlets 8 x 120V (10A) 3-pin female 8 x 230V (10A) 3-pin IEC female
Dimensions 483 x 102 x 45mm / 19in x 4in x 1.75in
Weight 2kg / 4.5lbs
15A (with suitable connector)
13A (with UK mains plug)
User Information (Please complete for your records)
Date Purchased: // Serial No:
The body of the unit may be cleaned with a soft damp cloth. We recommend internal cleaning be
carried out by a fully qualified technician.
Dealer Stamp: Model: PC-08 POWER PANEL
Maintenance & Servicing
Work on internal parts should be carried out by a qualified technician. Removal of any covers is
considered a breach of warranty and will not be covered under any such agreement unless
authorized first by the company.
Loading...