Chauvet Mega Moon User Manual

Snapshot

Use on Dimmer

Outdoor Use

Sound Activated

DMX 512

Master/Slave

Autoswitching

Power Supply

Replaceable Fuse

User Serviceable

Duty Cycle

User Manual

CHAUVET®, 2010, All Rights Reserved
Information and specifications in this User Manual are subject to change without notice. CHAUVET® assumes no
responsibility or liability for any errors or inaccuracies that may appear in this manual.

Rev01b

TABLE OF CONTENTS

1. BEFORE YOU BEGIN ................................................................................................................................................... 3

WHAT IS INCLUDED ................................................................................................................................................................................ 3

UNPACKING INSTRUCTIONS .................................................................................................................................................................... 3

SYMBOLS ............................................................................................................................................................................................. 3

AC POWER........................................................................................................................................................................................... 3

SAFETY INSTRUCTIONS .......................................................................................................................................................................... 4

2. INTRODUCTION ........................................................................................................................................................... 4

FEATURES ............................................................................................................................................................................................ 4

Additional Features ................................................................................................................................................... 4

DMX CHANNEL SUMMARY ..................................................................................................................................................................... 5

PRODUCT OVERVIEW............................................................................................................................................................................. 5

3. SETUP .......................................................................................................................................................................... 6

FUSE REPLACEMENT ............................................................................................................................................................................. 6

FIXTURE LINKING................................................................................................................................................................................... 6

DMX Data Cable ....................................................................................................................................................... 6

Cable Connectors ..................................................................................................................................................... 7

3-Pin to 5-Pin Conversion Chart ................................................................................................................................ 7

Setting up a DMX Serial Data Link ............................................................................................................................ 7

MASTER/SLAVE FIXTURE LINKING ........................................................................................................................................................... 8

MOUNTING............................................................................................................................................................................................ 8

Orientation ................................................................................................................................................................ 8

Rigging ..................................................................................................................................................................... 8

4. OPERATING INSTRUCTIONS ...................................................................................................................................... 9

OPERATION MODES ............................................................................................................................................................................... 9

Stand-Alone Mode (Sound-Active, Auto Mode) ......................................................................................................... 9

Master/Slave Mode (Master Sound, Master Auto) ..................................................................................................... 9

DMX Mode .............................................................................................................................................................. 10

USING DMX MODE ............................................................................................................................................................................. 10

DMX Channel Values .............................................................................................................................................. 10

Setting the Starting Address .................................................................................................................................... 11

GENERAL TROUBLESHOOTING .............................................................................................................................................................. 11

CONTACT US ...................................................................................................................................................................................... 12

5. APPENDIX .................................................................................................................................................................. 12

DMX PRIMER ..................................................................................................................................................................................... 12

GENERAL MAINTENANCE...................................................................................................................................................................... 13

RETURNS PROCEDURE ........................................................................................................................................................................ 13

CLAIMS .............................................................................................................................................................................................. 13

TECHNICAL SPECIFICATIONS ................................................................................................................................................................ 14

Mega Moon™ User Manual 2 9/16/2010 4:11 PM

1. BEFORE YOU BEGIN

What is included

 1 x Mega Moon™
 1 x Power Cord
 1 x Warranty Card
 1 x User Manual

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that
all parts are present, and have arrived in good condition. Notify the shipper immediately and retain
the packing material for inspection if any parts appear damaged from shipping or the carton shows
signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and
packing.

Symbols

This paragraph contains critical installation, configuration or operation information. Failure to comply
with this information may render the fixture partially or completely inoperative, cause damage to the
fixture or cause harm to the operator/user/technician.

This paragraph contains important installation or configuration information. Failure to comply with this
information may prevent the fixture from functioning correctly.

This paragraph reminds you of useful, although not critical, information.

AC Power

This fixture has an auto-switching power supply that can accommodate a wide range of input voltages
(100V - 240VAC, 50/60Hz). Before powering on the unit, make sure the line voltage to which you are
connecting it is within the range of accepted voltages.

Always connect the fixture to a switched circuit. Never connect the fixture to a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used only as a 0% to 100% switch.

To determine the power requirements for a particular fixture, see the label affixed to the back plate of
the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating indicates its
average current draw under normal conditions.

Before applying power to a fixture, check that the source voltage matches the fixture’s requirement.
Check the fixture or device carefully to make sure that if a voltage selection switch exists, it is set to
the correct line voltage you will use.

Always connect the fixture to a circuit with a suitable electrical ground.

Mega Moon™ User Manual 3 9/16/2010 4:11 PM

Safety Instructions

Please read these instructions carefully, which include important information about
the installation, usage and maintenance of this product.

 Please keep this User Guide for future consultation. If you sell the unit to another user, be sure

that they also receive this instruction booklet.

 This product is for indoor use only! To prevent risk of fire or shock, do not expose fixture to rain

or moisture.

 Make sure there are no flammable materials close to the unit while operating.
 Secure fixture to fastening device using a safety chain.
 Maximum ambient temperature (Ta) is 104°F (40°C). Do not operate the fixture at temperatures

higher than this.

 In the event of a serious operating problem, stop using the unit immediately. Never try to repair

the fixture by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center.

 Make sure the power cord is not crimped or damaged.
 Never disconnect the power cord by pulling or tugging on the cord.
 Avoid direct eye exposure to the light source while it is on.
 Do not daisy chain power to more than 37 units @ 120V.

There are no user serviceable parts inside the unit. Do not open the housing or
attempt any repairs. In the unlikely event that your unit may require service, please
contact CHAUVET at 954-929-1115.

2. INTRODUCTION

Features

 6-channel DMX-512 LED beam effect
 Individual control of red, green, blue and white LEDs within each cluster (4 total)
 Adjustable strobe speed
 Built-in automated programs via DMX
 Built-in sound activated programs via master/slave or DMX

Additional Features

 Razor-sharp rotating beams

 Additional power output: max 37 units @ 120V

Mega Moon™ User Manual 4 9/16/2010 4:11 PM

DMX Channel Summary

CHANNEL

FUNCTION

1

Module 1

2

Module 2

3

Module 3

4

Module 4

5

Strobe

6

Function

DIP

switches

Fuse holder

Power in

Bracket
adjustment
knob (1 of 2)

DMX in

Safety

eyebolt

DMX out

Hanging
bracket

Power out

Microphone
sensitivity

Microphone

Product Overview

Mega Moon™ User Manual 5 9/16/2010 4:11 PM

The fuse is located
inside this
compartment.
Remove using a flat
head screwdriver.

3. SETUP

Fuse Replacement

Disconnect the power cord before replacing a fuse and always replace with the
same type of fuse.

With a flat head screwdriver, wedge the fuse
holder out of its housing. Remove the blown
fuse from its holder and replace with the exact
same type of fuse. Insert the fuse holder back
in its place and reconnect power.

Fixture Linking

You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller
or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The
combined number of channels required by all the fixtures on a serial data link determines the number
of fixtures the data link can support.

Fixtures on a serial data link must be daisy chained in one single line. To comply
with the EIA-485 standard no more than 32 devices should be connected on one
data link. Connecting more than 32 fixtures on one serial data link without the use
of an optically isolated DMX splitter may result in deterioration of the digital DMX
signal.

DMX Data Cable

To link two or more fixtures together you must use DMX compliant data cables. You can purchase
CHAUVET certified DMX cables directly from a dealer/distributor or construct your own cable.

If you choose to create your own cable, please use data-grade cables that can carry a high quality
signal and are less prone to electromagnetic interference. Use a Belden© 9841 or equivalent cable,
which meets the specifications for EIA RS-485 applications.

Standard microphone cables cannot transmit DMX data reliably over long
distances.

The cable must have the following characteristics:

Maximum recommended serial data link distance: 500 m (1640 ft.)
Maximum recommended number of fixtures on a serial data link: 32

Type: shielded, 2-conductor twisted pair
Maximum capacitance between conductors: 30 pF/ft.
Maximum capacitance between conductor and shield: 55 pF/ft.
Maximum resistance: 20 ohms / 1000 ft.
Nominal impedance: 100 – 140 ohms

Mega Moon™ User Manual 6 9/16/2010 4:11 PM

This drawing provides
a general illustration of
the DMX Input/Output
panel of a lighting
fixture.

Universal DMX Controller

Continue the link

Cable Connectors

3-PIN TO 5-PIN CONVERSION CHART

Conductor

3-Pin Female (output)

5-Pin Male (Input)

Ground/Shield

Pin 1

Pin 1

Data ( - ) signal

Pin 2

Pin 2

Data ( + ) signal

Pin 3

Pin 3

Do not use

Pin 4

Do not use

Pin 5

COMMON

DMX +

DMX -

INPUT

OUTPUT

1 3 2

1

3

2

1

3

2

120 ohm, ¼ W
resistor between
pin 2 (DMX -) and
pin 3 (DMX +) of
the last fixture.

To avoid signal transmission
problems and interference, it is
always advisable to connect a DMX
signal terminator.

DMX connector configuration

Cabling must have a male XLR connector on one end and a female XLR connector on the other end.

Do not allow contact between the common and the fixture’s chassis ground.

Grounding the common can cause a ground loop, and your fixture may perform
erratically. Test the cables with an ohmmeter to verify correct polarity and to make
sure the pins are not grounded or shorted to each other.

3-Pin to 5-Pin Conversion Chart

If you use a controller with a 5-pin DMX output connector, you will need to use a 5­pin to 3-pin adapter. You may use the CHAUVET Model number DMX5M, or DMX5F.

The chart below details the proper cable conversion:

Setting up a DMX Serial Data Link

1. Connect the (male) 3-pin connector of the
DMX cable to the output (female) 3-pin
connector of the controller.

2. Connect the other end of the cable to the
(male) 3-pin input connector of the first
fixture

3. Connect the cable from the output of the
first fixture to the input of the second
fixture.

4. Continue connecting the other features as
indicated above.

CHAUVET Certified DMX Data Cables
Order Code Description

DMX1.5 DMX Cable 1.5 m/4.9 ft
DMX4.5 DMX Cable 4.5 m/14.8 ft
DMX10 DMX Cable 10 m/32.8 ft

Mega Moon™ User Manual 7 9/16/2010 4:11 PM

Master

Slave

Slave

Hanging Clamp

Master/Slave Fixture Linking

1. Link the fixtures as indicated in steps 1 to 4 of the previous section.

2. The setup of the Master/Slave or Stand-alone operation often requires the first fixture in the chain
to be initialized accordingly via settings in the control.

3. In addition, in the Master/Slave mode, the fixtures that follow may also need to be initialized as
“slaves.” Please consult the Operating Instructions section in this manual for complete
instructions for this type of configuration.

Mounting

Orientation

This fixture may be mounted in any safe position.

Rigging

It is important never to obstruct the vents pathway. Mount the fixture using, a suitable “C” or “O” type

clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the
desired position, retighten both knobs.

 When selecting an installation location, consider ease of access to the fixture for operation and

routine maintenance.

 Always use safety cables.
 Never mount the fixture in places where it may be exposed to rain, high humidity, extreme

temperature changes or restricted ventilation.

The clamp is sold separately

Mega Moon™ User Manual 8 9/16/2010 4:11 PM

4. OPERATING INSTRUCTIONS

Operation Modes

The fixture may be operated on stand-alone (sound activated), Master/Slave Mode or DMX Mode.

Stand-Alone Mode (Sound-Active)

This mode allows a single fixture to run to the beat of the music, or the fixture will change
automatically in Auto Mode.

1) Set the DIP switches position to Sound Active or Auto Mode.

Mode DIP switches

Master sound-active 1~10 = Off

2) The fixture will react to the low frequencies of music via the internal microphone in Sound Active

mode.

3) Use the audio sensitivity knob on the back of the fixture to make the fixture more or less

sensitive in Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity;
turning the knob clockwise increases the sensitivity.

Note: To use the fixture in automatic (without the sound trigger), you must use a DMX controller.

Master/Slave Mode (Sound)

This mode will allow you to link up to 32 fixtures together without a controller.

1) Use standard DMX cables to daisy chain your fixtures together via the DMX connector on the

rear of the fixtures. (For longer cable runs, we suggest a terminator at the output of the last
fixture).

2) Choose a fixture to function as the Master. Turn DIP switches to the Master position on the

fixture. The Master fixture must be the first fixture in line.

3) Please see the DIP switches settings for Stand-Alone Mode (described above) to set the fixture

to the Master setting of your choice.

4) Turn the DIP switches to the Slave position on the Slave fixture, and they will react the same as

the Master.

Mode DIP switches

Slave 1, 10 = On

Mega Moon™ User Manual 9 9/16/2010 4:11 PM

DMX Mode

CHANNEL

VALUE

FUNCTION

1-4

000  010
011  016
017  022
023  028
029  034
035  040
041  046
047  052
053  058
059  064
065  070
071  076
077  082
083  088
089  094
095  100
101  106
107  112
113  118
119  124
125  130
131  136
137  142
143  148
149  154
155  160
161  166
167  172
173  178
179  184
185  190
191  196
197  202
203  208
209  214
215  220
221  255

Module 1-4

No function
Group 1 of White
Group 2 of White
Group 3 of White
Group 1 of Red
Group 2 of Red
Group 3 of Red
Group 1 of Green
Group 2 of Green
Group 3 of Green
Group 1 of Blue
Group 2 of Blue
Group 3 of Blue
All White
All Red
All Green
All Blue
All Red & Green
All Red & Blue
All Green & Blue
All Red & Green & Blue
All Red & White
All Green & White
All Blue & White
Group 1 of Blue & all White
Group 2 of Blue & all Red
Group 3 of Blue & all Green
Group 1 of Blue & group 3 of Red
Group 2 of Blue & group 2 of Red
Group 3 of Blue & group 1 of Red
Group 1 of Green & group 3 of White
Group 2 of Green & group 2 of White
Group 3 of Green & group 1 of White
Group 1 of Blue, group 3 of Green, group 1 of Red, & group 3 of White
Group 2 of Blue, group 2 of Green, group 2 of Red, & group 2 of White
Group 3 of Blue, group 1 of Green, group 3 of Red, & group 1 of White
All White & Red & Green & Blue

5

000  010
011  255

Strobe

No function
Strobe: (Slow > Fast)

6

000  010
011  036
037  062
063  088
089  114
115  130
131  156
157  182
183  208
209  250
251  255

Function

No function
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Auto mode
Sound mode

This mode allows the fixture to receive control from any universal DMX controller.

Using DMX Mode

If you are unfamiliar with DMX, please read the DMX Primer section.

1) Using DMX cables, daisy chain the fixture(s), starting from the output of the DMX controller.

2) Assign the individual DMX address, using DIP switches 1 - 9 on each fixture.

3) Set the fixture to DMX operation mode by turning DIP switch 10 to the on position.

DMX Channel Values

Mega Moon™ User Manual 10 9/16/2010 4:11 PM

Setting the Starting Address

Symptom

Solution(s)

Applies to

Lights

Foggers &

Snow

Controllers

Dimmers &

Chaser

Auto shut off

Check fan thermal switch reset



Beam is very dim or not
bright

Clean optical system or replace lamp
Check 220/110 V switch for proper setting



Breaker/Fuse keeps
blowing

Check total load placed on device



Chase is too slow

Check user’s manual for speed adjustment

 



Device has no power

Check for power on Mains.
Check device’s fuse. (internal and/or external)

 



Fixture is not
responding

Check DMX Dip switch settings for correct
addressing
Check DMX cables
Check polarity switch settings



Fixture is on but there
is no movement to the
audio

Make sure you have the correct audio mode on

the control switches. If audio provided via ¼” jack,

make sure a live audio signal exists
Adjust sound sensitivity knob

 



Light will not come on
after power failure

Some discharge lamps require a cooling off period
before the electronics in the fixture can kick start it
again. Wait 5 to 10 minutes before powering it up
again.



Loss of signal

Use only DMX cables
Install terminator
Note: Keep DMX cables separated from power
cables or black lights.

  



No flash

Re-install bulb; it may have shifted in shipping



No light output

Check slip ring & brushes for contact
Install bulb
Call service technician



Relay will not work

Check reset switch
Check cable connections



Remote does not work

Make sure connector is firmly attached to device





If this is your first time addressing a fixture using the DMX-512 control protocol, we
suggest you to go to the Appendix Section and read the DMX Primer section. It
contains very useful information that will help you understand how DMX works.

General Troubleshooting

Mega Moon™ User Manual 11 9/16/2010 4:11 PM

If you still have a problem after trying the above solutions, please contact CHAUVET®
Technical Support at the location on the next page.

Contact Us

World Wide

General Information CHAUVET®

5200 NW 108th Ave
Sunrise, FL 33351
voice: 954.929.1115
fax: [phone]
toll free: 800.762.1084

Technical Support CHAUVET®

World Wide Web www.chauvetlighting.com

5. APPENDIX

DMX Primer

The DMX mode enables the use of a universal DMX controller device. There are 512 channels in a
DMX-512 connection. Channels may be assigned in any manner. A fixture capable of receiving DMX
512 will require access to one or more sequential channels. To do this, each fixture requires a "start
address" from 1 to 512. A fixture requiring one or more channels for control begins to read the data
on the channel indicated by the start address. For example, a fixture that uses six DMX channels and
was addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103,
104, and 105.

The user must assign a starting address on the fixture that indicates the first channel reserved in the
controller. There are many different types of DMX controllable fixtures and they all may vary in the
total number of channels required. Choosing a start address should be planned in advance. Channels
should never overlap. If they do, this will result in erratic operation of the fixtures whose starting
address are set incorrectly. However, you can control multiple fixtures of the same type using the
same starting address as long as the intended result is that of unison movement or operation. In other
words, the fixtures will be slaved together and they will all respond in exactly the same way.

5200 NW 108th Ave
Sunrise, FL 33351
voice: 954.929.1115 (Press 4)
fax: [phone] (Attention: Service)

DMX fixtures are designed to receive data through a serial DMX Daisy Chain. In a Daisy Chain, the
DATA OUT of one fixture connects to the DATA IN of the next fixture. The order in which the fixtures
are connected is not important and has no effect on how a controller communicates to each fixture.
Use an order that provides for the easiest and most direct cabling, however.

Connect the fixtures using a shielded, two-conductor twisted pair cable with one 3-pin XLR male
connector on one end and a 3-pin XLR female connector on the other end. The shield connection is
pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). See page 6 for details on this
type of cable.

Mega Moon™ User Manual 12 9/16/2010 4:11 PM

General Maintenance

To maintain optimum performance and minimize wear, fixtures should be cleaned frequently. Usage
and environment are contributing factors in determining the cleaning frequency. As a general rule,
fixtures should be cleaned at least twice a month. Dust build up reduces light output performance and
can cause overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure
to power off fixture before conducting maintenance.

Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust
collected on external vents and internal components. Clean all glass surfaces when the fixture is cold
with a mild solution of glass cleaner or Isopropyl Alcohol and a soft lint-free cotton cloth or lens tissue.
Apply solution to the cloth or tissue and drag dirt and grime to the outside of the lens. Gently polish
optical surfaces until they are free of haze and lint.

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates:
damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s
optics. Clean with soft cloth using normal glass cleaning fluid. Always dry the parts carefully. Clean
the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.

Returns Procedure

Returned merchandise must be sent prepaid and in the original packing; call tags will not be issued.
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #).
Products returned without an RMA # will be refused. Call CHAUVET and request an RMA #, prior to
shipping the fixture. Be prepared to provide the model number, serial number and a brief description
of the cause for the return. Be sure to properly pack fixture; any shipping damage resulting from
inadequate packaging is the customer’s responsibility. As a suggestion, proper UPS packing or
double-boxing is always a safe method to use. CHAUVET reserves the right to use its own discretion
to repair or replace product(s).

Once you have received the RMA#, please include the following information on a
piece of paper inside the box:

1) Your name

2) Your address

3) Your phone number

4) The RMA #

5) A brief description of the symptoms

Claims

Damage incurred in shipping is the responsibility of the shipper; therefore, any damage must be
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and
submit claims with the shipper in the event that a fixture is damaged during shipping. Any other claim
for items such as missing component/part, damage not related to shipping, and concealed damage
must be made within seven (7) days of receiving merchandise.

Mega Moon™ User Manual 13 9/16/2010 4:11 PM

Technical Specifications

WEIGHT & DIMENSIONS

Length ........................................................................................................................ 18.3 in (465 mm)

Width.......................................................................................................................... 12.2 in (310 mm)

Height .......................................................................................................................... 6.7 in (170 mm)

Weight.............................................................................................................................. 8.9 lbs (4 kg)

POWER

Autoswitching ................................................................................................... 100-240 VAC 50/60 Hz

Fuse ................................................................................................. F2 A 250 V (5 x 20 mm fast-blow)

Power Consumption ....................................................................................18 W (0.2 A) max @ 120 V

Inrush Current ................................................................ ............................................. (0.2 A) @ 120 V

Power Consumption ....................................................................................17 W (0.1 A) max @ 230 V

Inrush Current ................................................................ ............................................. (0.1 A) @ 230 V

Power Output ............................................................ 37 units max @ 120 VAC, 74 units max @ 230 V

LIGHT SOURCE

LED ................................................................ 228 (48 Red, 72 Green, 72 Blue, 36 White) 100,000 hrs

COVERAGE

Coverage angle (horizontal spread) ................................................................................................ 74°

THERMAL

Maximum ambient temperature ...................................................................................... 104° F (40° C)

CONTROL & PROGRAMMING

Data input ............................................................................................. locking 3-pin XLR male socket

Data output ........................................................................................ locking 3-pin XLR female socket

Data pin configuration ............................................................................ pin 1 shield, pin 2 (-), pin 3 (+)

Protocols ..................................................................................................................... DMX-512 USITT

DMX Channels .................................................................................................................................... 6

ORDERING INFORMATION

Mega Moon™ ................................................................................................................. MEGAMOON

WARRANTY INFORMATION

Warranty ........................................................................................................... 2-year limited warranty

Mega Moon™ User Manual 14 9/16/2010 4:11 PM