Page 1
Optional Controllers
• Timer Remote
• Wireless remote
Power Connections
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other
connections be required they must be carried out with the following configuration.
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.
In the UK, it is required that all mains plugs are fitted with 5A fuses.
Technical Specifications
Power 120V~60Hz AC 230V~50Hz AC
Fuse 20mm Glass 7A Fast Blow 20mm Glass 4A Fast Blow
Preheat Time 4 minutes
Fog Output 3,000 cu ft per minute
Tank Capacity 1 Liter / Quart
Dimensions 315 x 160 x 135mm / 12.4in x 6.3in x 5.3in
Weight 4kg / 8.8lbs
MMiiii
MM
nniiii
nn
FF
oo
FF
oo
F-800
Users Guide
gg
gg
gg
gg
eerrrr
ee
User Information (Please complete for your records)
Date Purchased: // Serial No:
Dealer Stamp: Model:
Please read these instructions carefully before use
F-800 MINI FOGGER
World-wide Headquarters:
3000 North 29th Ct., Hollywood, Florida, USA, FL 33020
Tel: +1-954-929-1115 Fax: +1-954-929-5560
European Office:
Unit 18, Hunslet Trading Estate, Leeds, UK
LS10 1BL
Tel: (0113) 276-0755 Fax: (0113) 277-6675
www.ChauvetLighting.com
Page 2
Mounting Bracket
A
Fluid Tank Cap
Nozzle
Introduction
Congratulations on the purchase of your new CHAUVET fog machine. We are confident you will
enjoy many trouble free hours with this unit. To assist with the care and use of the product we
have prepared this short guide.
Operation
Before connecting this unit to the mains power supply for the first time you must first fill the fluid
tank with fog fluid and check that the nozzle is clean and unobstructed.
This fog machine has been designed to function on a mains power supply of either 120V~60Hz or
230V~50Hz and has been fitted with a suitable power plug for use with your local voltage. Check
the label on the unit and the power plug for the correct voltage.
Place the machine on a level surface and loosen the cap of the fluid tank to fill with quality water
based fog fluid. We recommend use of CHAUVET fog fluid as it has been specially formulated for
use with CHAUVET foggers. Plug the remote control unit into the socket at the rear and switch on
to allow time to preheat. Once the machine has reached temperature and is ready to operate the
green light on the remote control will illuminate. Push the button on the remote control when lit
and hold for prolonged bursts of fog.
Always monitor fog fluid level as running the machine with no fluid could cause permanent
damage. Please do not touch or place anything in close proximity to the nozzle during operation
or preheat as there is a danger of burns.
It is normal for your fogger to have a recycling period after long bursts when the unit will shut itself
down for a short period in order to heat up to temperature. During this time no fog can be
produced. The green light on the remote will illuminate when the unit is ready for action again.
Due to the high operating temperature of fog machines it is advised that the effect be used in well
ventilated areas taking care not to obstruct the air vents. After use, allow time to ‘cool’ for safety
before moving or touching.
Installation / Mounting
The fogger must be used in a horizontal position sitting on a level surface or it may be mounted
using the bracket provided. Ensuring that the fog is not shooting directly at anyone’s face.
Whatever method of installation you choose, the fogger must not have more than a 15 degree
angle of inclination. We always suggest that for safety purposes use of a suitable hanging clamp
and safety cable is essential. CHAUVET offers a range of items, which are ideal for safe
mounting.
t the Rear:
⇒ Screw Cap
Fuseholder
⇒ On/Off Switch
⇒ Remote Control
Socket
Fig.1
Cleaning
Cleaning your fog machine regularly will help reduce costly parts replacement and repair charges.
After every 40 hours of continuous operation or when the machine will be idle for a long time it is
recommended to run a cleaning solution composed of 80% distilled water and 20% white vinegar
through the system to prevent the accumulation of particles in the heating element.
1. While unit is unplugged and cool, unscrew nozzle at very front of unit (fig.1) and clean out
debris with white vinegar and a pipe cleaner, making sure that the hole is free and
unobstructed.
2. Empty all fog fluid from the machine and replace with cleaning solution in the tank. Plug unit
in and allow to warm as usual.
3. Run unit in a well ventilated area until tank is empty.
4. Replace nozzle.
5. Cleaning is now complete. Unplug and refill with a quality water based fog fluid once cool.
All fog machines are prone to clogging due to the consistency of fog fluid and the high
temperatures at which it vaporizes. However a well maintained machine should provide years of
reliable use.
The body of the unit may be cleaned with a dry cloth. Store dry.
Maintenance & Servicing
Do not allow fog fluid to become contaminated. Always replace cap after use.
Work on internal parts should be carried out by a qualified technician. Removal of any covers is
considered a breach of warranty and will not be covered under any such agreement unless
authorized first by the company.
Troubleshooting
If you experience low output, pump noise or no output at all, unplug immediately. Check fluid
level, the external fuse, remote connection and main power supply. If all appear to be OK, plug
the unit in again. If fog does not come out after holding the remote control button for 30 seconds,
check the hose attached to the tank to make sure there is fluid going through the hose. If you are
unable to determine the cause of the problem, do not simply continue to push the remote control
button as this may damage the unit. Contact CHAUVET for servicing.
Caution
• Do not obstruct the nozzle. Fog output is very hot, avoid coming within 60cm (24”) of the
nozzle during operation. Never aim the nozzle directly at people or naked flames.
• Danger of Burns. Keep out of reach of children. Do not leave machine unattended.
• Output nozzle becomes very hot during operation (300
least 50cm (20”) away from the nozzle.
• Always allow the fogger to cool down before cleaning or servicing.
• Never use any other type of liquid other than water based quality fog fluid.
• Never drink fog liquid. If its ingested, call a doctor immediately. If fog fluid comes into contact
with skin or eyes, rinse thoroughly with water.
• Beware of condensation around the nozzle. Consider carefully when mounting.
• All fog machines may splutter small amounts of fog occasionally during operation and for a
minute or so after being turned off.
• No user serviceable parts inside, please refer to CHAUVET for service.
o
C). Keep flammable materials at
Loading...