Chauvet F-415VW User Manual

Page 1
User Manual
Page 2
Edition Notes
The Ovation F-415VW User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Ovation F-415VW.
Trademarks
CHAUVET, the Chauvet logo and Ovation F-415VW are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
© Copyright 2019 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetprofessional.com
.
Document Revision
This Ovation F-415VW User Manual is the 4th edition of this document. Go to
www.chauvetprofessional.com
for the latest version.
Ovation F-415VW User Manual Rev. 4
Page 3
Table of Contents
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Manual Conventions ..................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
Personal Safety.............................................................................................................. 2
Mounting and Rigging .................................................................................................... 2
Power and Wiring........................................................................................................... 2
Operation ...................................................................................................... 2
Expected LED Lifespan................................................................................. 2
2. Introduction ................................................................................ 3
Description .................................................................................................... 3
Features........................................................................................................ 3
Product Overview.......................................................................................... 4
Product Dimensions ...................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
AC Plug .......................................................................................................................... 5
Power Linking................................................................................................................. 5
Fuse Replacement ......................................................................................................... 5
DMX Linking.................................................................................................. 5
DMX Personalities.......................................................................................................... 5
Remote Device Management (RDM) ............................................................................. 5
Master/Slave Connectivity............................................................................. 6
Mounting ....................................................................................................... 6
Orientation...................................................................................................................... 6
Rigging ........................................................................................................................... 6
Procedure....................................................................................................................... 6
4. Operation .................................................................................... 7
Control Panel Operation................................................................................ 7
Control Options ............................................................................................. 7
Programming................................................................................................. 7
Configuration (DMX) ..................................................................................... 7
DMX Personalities.......................................................................................................... 7
Starting Address............................................................................................................. 7
Menu Map ..................................................................................................... 8
Color Temperature DMX Chart ..................................................................... 10
Configuration (Standalone) ........................................................................... 11
Static Mode .................................................................................................................... 11
Zoom .............................................................................................................................. 11
Red Shift ........................................................................................................................ 11
Master/Slave .................................................................................................................. 11
Dimmer Curve ................................................................................................................ 11
Dimmer Profiles.............................................................................................................. 11
White Balance ................................................................................................................ 12
LED Frequency .............................................................................................................. 12
Fan Mode ....................................................................................................................... 12
Back Light ...................................................................................................................... 12
System Information ........................................................................................................ 12
Zoom Reset.................................................................................................................... 12
Factory Reset................................................................................................................. 12
Ovation F-415VW User Manual Rev. 4
i
Page 4
Table of Contents
DMX Values .................................................................................................. 13
19Ch............................................................................................................................... 13
17Ch............................................................................................................................... 13
14Ch............................................................................................................................... 14
10Ch............................................................................................................................... 14
7Ch................................................................................................................................. 14
7Ch2............................................................................................................................... 15
5Ch................................................................................................................................. 15
2Ch................................................................................................................................. 15
5. Technical Information ................................................................ 16
Product Maintenance .................................................................................... 16
6. Technical Specifications ........................................................... 17
Photometrics Charts ..................................................................................... 18
Returns............................................................................................ 19
Contact Us ...................................................................................... 20
ii
Ovation F-415VW User Manual Rev. 4
Page 5
BEFORE YOU BEGIN
!

1. Before You Begin

What Is Included

Ovation F-415VW
•Neutrik
®
powerCON® power cord

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate customer’s claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Manual Conventions

Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option

Symbols

Gel frame holder (6.25 in/159 mm accessories)
Quick Reference Guide
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Ovation F-415VW User Manual Rev. 4
Page 1 of 20
Page 6
BEFORE YOU BEGIN
!

Safety Notes

Read all the following safety notes before working with this product. These notes contain important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained, certified technicians. Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.

Personal Safety

Avoid direct eye exposure to the light source while the product is on.
Always disconnect the product from the power source before cleaning or replacing the fuse.
Always connect the product to a grounded circuit to avoid the risk of electrocution.
Do not touch the product’s housing when operating because it may be very hot.

Mounting and Rigging

Do not operate this product outdoors or in any location where dust, excessive heat, water, or
humidity may affect it (IP20).
Do not leave any flammable material within 50 cm of this product while operating or connected to
power.
CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm,
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
When hanging this product, always secure to a fastening device using a safety cable.
Use only the hanging/mounting bracket to carry this product.

Power and Wiring

Always ensure that the product is connected to proper voltage in accordance with the specifications
in this manual or on the product’s specification label.
Never connect the product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.

Operation

Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
Do not cover the ventilation slots when operating to avoid internal overheating.
The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.
The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
In the event of a serious operation problem, stop using this product immediately!
If your Chauvet product requires service, contact Chauvet Technical Support.

Expected LED Lifespan

LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting the overall projection intensity may extend the LEDs’ lifespan.
Page 2 of 20
Ovation F-415VW User Manual Rev. 4
Page 7
INTRODUCTION

2. Introduction

Description

The Ovation F-415VW is a variable white Fresnel-style LED lighting fixture with a 16-bit dimming resolution for smooth fades. It delivers a beautiful flat, even field of light. Its motorized zoom, with a range between 27° and 68°, can be controlled either manually or via DMX. Simple and complex DMX channel profiles offer programming versatility. Virtually silent operation makes it ideal for use in any situation.

Features

Operating modes:
2-channel: dimmer, red shift
5-channel: dimmer, color temperature, hue, zoom, red shift
7-channel: dimmer, 16-bit dimmer, color temperature, hue, zoom, strobe, red shift
7-channel: red, orange, green, royal blue, blue, lime, zoom
10-channel: dimmer, red, orange, green, royal blue, blue, lime, strobe, zoom, red shift
14-channel: dimmer, red, orange, green, royal blue, blue, lime, strobe, color temperature, hue, dimmer speed mode, zoom, motor reset, red shift
17-channel: dimmer, 16-bit dimmer, 16-bit red, orange, green, royal blue, blue, and lime, strobe, zoom, red shift
19-channel: dimmer, 16-bit dimmer, 16-bit red, orange, green, royal blue, blue, and lime, strobe, color temperature, hue, zoom, red shift
Variable white LED Fresnel fixture for theater, film, and production
Soft and even field of light
Smooth, motorized zoom from 27° and 68°
Color temperature presets from 2800 K to 8000 K with high CRI and CQS
28 VDC power input via 3-pin XLR to power the fixture from an external battery pack
Beautiful 16-bit dimming
Proprietary LED engine delivers tremendous, equal output at all color temperatures
Easy-to-use on-board control of color temperature, zoom, and dimming
+/- green adjustment via DMX or on-board control
Independent color control over the six-color engine when a splash of color is needed
RDM (Remote Device Management) for added flexibility
Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
Virtually silent operation for use in studio and theater applications
Ovation F-415VW User Manual Rev. 4
Page 3 of 20
Page 8

Product Overview

Fuse
Zoom
Color temperature & hue
Neutrik
®
powerCON® in/out
Menu buttons
Tilt adjustment
knob
Display
DMX in/out
28 VDC input
Dimmer
13.90 in 353 mm
7.76 in
197 mm
15.04 in 382 mm
9.53 in
242 mm
11.22 in 285 mm
9.53 in
242 mm

Product Dimensions

INTRODUCTION
Page 4 of 20
Ovation F-415VW User Manual Rev. 4
Page 9
SETUP
!
!

3. Setup

AC Power

Each Ovation F-415VW has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Ovation F-415VW, refer to the label affixed to the product or to the Technical Specifications
The listed current rating indicates the maximum current draw during normal operation. For more information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com
Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

AC Plug

The Ovation F-415VW comes with a power input cord terminated with a Neutrik® powerCON® connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the product has no plug, or if the plug needs to be changed, use the table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass AC Neutral White Blue Silver AC Ground Green/Yellow Green/Yellow Green
chart in this manual.
.

Power Linking

The product supports power linking. It is possible to power link up to12 products at 120 V, up to 21 products at 208 V, or up to 23 products at 230 V. This product comes with a power input cord. Power­linking cables are available for purchase from Chauvet.

Fuse Replacement

1. Disconnect this product from the power outlet.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (T 3.15 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always replace the blown fuse with another of the same type and rating.

DMX Linking

The Ovation F-415VW can be linked to a DMX controller using a 5-pin DMX connection. If using other DMX-compatible products with this product, it is possible to control each individually with a single DMX controller.

DMX Personalities

The Ovation F-415VW uses a 5-pin DMX data connection for the 2Ch, 5Ch, 7Ch, 7Ch2, 10Ch, 14Ch, 17Ch, and 19Ch DMX personalities.
Refer to the Introduction
Refer to the Operation personalities.
•The DMX Values
For information about DMX standards, Master/Slave connectivity, or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com
section provides detailed information regarding the DMX personalities.

Remote Device Management (RDM)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer, as not all DMX controllers have this capability. The Ovation F-415VW supports RDM protocol that allows feedback to make changes to menu map options.
for a brief description of each DMX personality.
chapter to learn how to configure the Ovation F-415VW to work in these
.
Ovation F-415VW User Manual Rev. 4
Page 5 of 20
Page 10
SETUP
Safety cable
(such as CH-05 from Chauvet)
Mounting clamp
(such as CTC-50 or CTC-50HCN
from Chauvet)
Mounting bracket
Bracket adjustment knob
Overhead Mounting

Master/Slave Connectivity

The Master/Slave mode allows an Ovation F-415VW (the master) to control one or more Ovation F­415VW products (the slaves) without a DMX controller. One Ovation F-415VW becomes the master when running an auto or custom program, or by being in a Static mode.
Each slave’s control panel must be configured to operate in Slave mode. During Master/Slave operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX controller signals may interfere with the signals from the master.
The Operation section of this manual provides detailed instructions on how to configure the master and slaves.
For more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX primer from the Chauvet website:
www.chauvetprofessional.com.

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. For CHAUVET Professional line of mounting clamps, go to: http://trusst.com/products/

Orientation

Always mount this product in a safe position, ensuring that there is adequate room for ventilation, configuration, and maintenance.

Rigging

Chauvet recommends using the following general guidelines when mounting this product:
Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming purposes.
Make sure that the structure onto which the product will be mounted can support the product’s weight. See the Technical Specifications
When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
When power linking multiple products, mount the products close enough for power-linking cables to reach.
The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
for weight information.

Procedure

The Ovation F-415VW comes with a double-bracketed yoke that can be used as a floor stand or to which mounting clamps can be attached for hanging. Mounting clamps must be purchased separately. Ensure that the clamps can support the weight of this product. Use at least one mounting point per product where necessary.
Mounting Diagram
.
Page 6 of 20
Ovation F-415VW User Manual Rev. 4
Page 11
OPERATION

4. Operation

Control Panel Operation

Button Function
<MENU>
<ENTER>
<UP>
<DOWN>
<Color Temperature
& Hue>
<Dimmer>
<Zoom>

Control Options

Set the Ovation F-415VW starting address in the 001-512 DMX range. This enables control of up to 23 products in the 19-channel personality.

Programming

Refer to the Menu Map to understand the menu options. The menu map shows the main level and a variable number of programming levels for each option.
To go to the desired main level, press <MENU> repeatedly until the option shows on the display. Press <ENTER> to select. This will show the first programming level for that option.
To select an option or value within the current programming level, press <UP> or <DOWN> until the option shows on the display. Press <ENTER> to select. This will show either the first option if there is another programming level, or the selected value.
Press <MENU> repeatedly to exit to the previous main level.
Exits from the current menu or function Enables the currently displayed menu or sets the currently selected value in to the
current function Navigates upward through the menu list or increases the numeric value when in a
function Navigates downward through the menu list or decreases the numeric value when in
a function Push twice, then turn to select the color temperature. Push again, then turn to set
the hue Push twice, then turn to increase or decrease the dimmer Push twice, then turn to increase or decrease the zoom

Configuration (DMX)

Use DMX configurations to operate the product with a DMX controller.

DMX Personalities

This setting allows the user to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (2Ch, 5Ch, 7Ch, 7Ch2, 10Ch, 14Ch, 17Ch, and 19Ch).
See the Starting Address section for the highest starting address suggested for each personality.
Make sure that the starting addresses on the various products do not overlap due to the new personality setting.

Starting Address

In this mode, each product will respond to a unique starting address from the DMX controller. All products with the same starting address will respond in unison.
1. Go to the DMX Address main level.
2. Set the starting address (001512).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality DMX Address DMX Personality DMX Address
2Ch 511 10Ch 509 5Ch 508 14Ch 499 7Ch 506 17Ch 496
7Ch2 506 19Ch 494
Ovation F-415VW User Manual Rev. 4
Page 7 of 20
Page 12

Menu Map

Main Level Programming Levels Description
DMX
Address
DMX
Channel
001–512*
2Ch
5Ch
7Ch
7Ch2
10Ch
14Ch
17Ch
19Ch
Selects DMX address (*highest channel restricted to personality chosen)
2-channel: dimmer, red shift 5-channel: dimmer, color temperature,
hue, zoom, 7-channel: 16-bit dimmer, color
temperature, hue, zoom, strobe, red shift 7-channel: red, orange, green, royal
blue, blue, lime, zoom 10-channel: dimmer, red, orange,
green, royal blue, blue, lime, strobe, zoom,
14-channel: dimmer, red, orange, green, royal blue, blue, lime, strobe, color temperature, hue, dimmer speed mode, zoom, motor reset,
17-channel: 16-bit dimmer, 16-bit red, orange, green, royal blue, blue, and lime, strobe, zoom,
19-channel: 16-bit dimmer, 16-bit red, orange, green, royal blue, blue, and lime, strobe, color temperature, hue, zoom, red shift
red shift
OPERATION
red shift
red shift
red shift
Page 8 of 20
Ovation F-415VW User Manual Rev. 4
Page 13
OPERATION
Main Level Programming Levels Description
2800K 2900K 3000K 3100K 3200K 3300K 3400K 3500K 3600K 3700K 3800K 3900K 4000K 4100K 4200K 4300K
Color
Temperature
Static
Manual
Color Mixer
Zoom 0–255 Controls zoom
Red Shift
Master/
Slave
Dimmer
Curve
Dimmer
Mode
4400K 4500K 4600K 4700K 4800K 4900K 5000K 5100K 5200K 5300K 5400K 5500K 5600K 5700K 6000K 6500K 7000K 7500K 8000K
Royal Blue
Master
Linear
Square
I Square
SCurve
Dimmer 1–3
Dimmer 0–255
Sets the color temperature, dimmer, and hue (green/magenta) levels. Emulates a tungsten lamp at the specified color temperature. Refer to the Color Temperature DMX Chart specific values.
Hue -25–25
Red
Orange
Green
Blue
Lime
On Off
Slave
Off Linear dimmer
0–255
Combines red, orange, green, royal blue, blue, and lime to make a custom color (0–100%)
Mimics halogen lamp dimming
Receives DMX signal from the DMX controller (master)
Receives DMX signal from the master unit
Sets the dimmer curve
Dimming curves, from fast (Dimmer 1) to slow (Dimmer 3)
for
Ovation F-415VW User Manual Rev. 4
Page 9 of 20
Page 14
Main Level Programming Levels Description
Off Uses factory default white setting
Sets red LED maximum value
Sets the PWM frequency
Turns off display backlight after 10 seconds of inactivity
Turns off display backlight after 30 seconds of inactivity
Turns off display backlight after 2 minutes of inactivity
Shows total hours the product has been powered on
Resets zoom settings when product is turned off
Resets the product to factory default settings
White
Balance
LED
Frequency
Fan Mode
Back Light
Information
Reset Zoom
w/ Power
Reset
Factory
Red
Orange Sets orange LED maximum value
Manual
Fixture Hours _ _ _ _H
Version V_._ Shows current firmware version
UID _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID
Green Sets green LED maximum value
Royal Blue Sets royal blue LED maximum value
Blue Sets blue LED maximum value
Lime Sets lime LED maximum value
600Hz 1200Hz 2000Hz 4000Hz 6000Hz
25KHz
Auto Sets the fan to auto mode
On Sets the fan to always on Off Sets the fan to always off
Silent Sets the fan to silent
10S
30S
2Min
Always On Display backlight always on
No
Yes
No
Yes
125–255
OPERATION

Color Temperature DMX Chart

DMX Channel
Value
000 005 006 013 2800–2900K 091 097 4000–4100K 175 181 5200–5300K 014 020 2900–3000K 098 104 4100–4200K 182 188 5300–5400K 021 027 3000–3100K 105 111 4200–4300K 189 195 5400–5500K 028 034 3100–3200K 112 118 4300–4400K 196 202 5500–5600K 035 041 3200–3300K 119 125 4400–4500K 203 209 5600–5700K 042 048 3300–3400K 126 132 4500–4600K 210 216 5700–6000K 049 055 3400–3500K 133 139 4600–4700K 217 223 6000–6500K 056 062 3500–3600K 140 146 4700–4800K 224 230 6500–7000K 063 069 3600–3700K 147 153 4800–4900K 231 237 7000–7500K 070 076 3700–3800K 154 160 4900–5000K 238 244 7500–8000K 077 083 3800–3900K 161 167 5000–5100K 245 255 8000K
Page 10 of 20
Color
Temperature
No function
DMX Channel
Val ue
084 090 3900–4000K 168 174 5100–5200K
Color
Temperatur e
Ovation F-415VW User Manual Rev. 4
DMX Channel
Value
Color
Temperature
Page 15
OPERATION

Configuration (Standalone)

Use standalone configuration to operate the product without a DMX controller.

Static Mode

The Static mode allows for an unchanging color without a DMX controller.
Color Temperature
To select a color temperature, do the following:
1. Go to the Static main level.
2. Select Color Temperature.
3. Select the desired color temperature (see Color Temperature DMX Chart
4. Select the desired output level (0–255).
Manual Color Mixer
To do color mixing without a DMX controller, follow the instructions below:
1. Go to the Static main level.
2. Select Manual Color Mixer.
3. Select the color to edit (Red, Orange, Green, Royal Blue, Blue, or Lime Green).
4. Select the desired output level for that color (0–255).
5. Repeat steps 3 and 4 until product outputs as desired.

Zoom

The zoom setting allows standalone control of the motorized zoom. To adjust, do the following:
1. Go to the Zoom main level.
2. Select the desired zoom level (0–255).

Red Shift

The Red Shift function causes the amber LEDs to imitate the appearance of a halogen lamp when dimming. To adjust the Red Shift function, do the following:
1. Go to the Red Shift main level.
2. Select On or Off.

Master/Slave

The Master/Slave mode allows a group of Ovation F-415VW products (the slaves) to simultaneously duplicate the output of another Ovation F-415VW (the master) without a DMX controller. To set each of the slaves:
1. Go to the Master/Slave main level
2. Select Slave.
To set the master:
1. Go to the Master/Slave main level
2. Select Master.
3. Select a static setting.
The master is the one that runs a program whether in Auto or Static mode.
Do not connect a DMX controller to the products configured for Master/Slave operation. The DMX controller may interfere with signals from the master.
The master should be the first product in the daisy chain.
).

Dimmer Curve

To set the dimmer curve, follow the instructions below:
1. Go to the Dimmer Curve main level.
2. Select the desired option (Linear, Square, I Squa, or SCurve).

Dimmer Profiles

This setting determines how fast the output of the Ovation F-415VW changes when the output value is modified. It provides four different options to simulate the dimming curve of an incandescent lighting product. To select a specific dimmer profile, do the following:
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (Off, Dimmer 1, Dimmer 2, or Dimmer 3).
Off: The output is proportional (linear) to the dimmer channel value. Dimmer 1-3: The output follows the dimmer value based on the corresponding dimmer curve, Dimmer 1 being the fastest.
Ovation F-415VW User Manual Rev. 4
Page 11 of 20
Page 16
OPERATION
!

White Balance

This setting determines the maximum output values for each color, which affects the appearance of a full output white.
1. Go to the White Balance main level.
2. Select Off (the product will use a default setting) or Manual.
3. For Manual mode, select the color value to edit (Red, Orange, Green, Royal Blue, Blue, or Lime Green).
4. Set the maximum value for the selected color (125–255).
5. Repeat steps 3 and 4 until the product outputs as desired.

LED Frequency

This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation F-415VW. To do so, follow the instructions below:
1. Go to the LED Frequency main level.
2. Select PWM Frequency (600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25Khz).

Fan Mode

This setting determines how the fan speed on the Ovation F-415VW is set.
1. Go to the Fan Mode main level
2. Select Auto (fan speed will increase or decrease based on product temperature), Off (fan will stay off. Product output will decrease based on product temperature), Silent (fan will maintain a
constant silent speed), or On (fan speed will always be at maximum).
NOTICE: When operating in Fan Mode: Off, the output of the fixture will be reduced and will not reach the same levels as when using other fan modes.
WARNING: When operating in Fan Mode: Off, the fixture will become hotter to the touch than when using other fan modes. Use proper protective equipment to prevent burns. Keep a safe distance from flammable objects.

Back Light

This setting allows for selection of the amount of time the backlight on the Ovation F-415VW’s display stays on after the last button is pressed on the control panel.
1. Go to the Back Light main level.
2. Select 10S (10 seconds), 30S (20 seconds), 2Min (2 minutes), or Always On (remains on).

System Information

This option displays the total number of hours the product has run, the installed software version, and the product’s UID.
1. Go to the Information main level.
2. Select Fixture Hours, Version, or UID.

Zoom Reset

This setting determines whether the zoom resets when power is applied to the Ovation F-415VW.
1. Go to the Reset Zoom w/ Power main level.
2. Select No (zoom stays in last command position when product is turned off) or Yes (zoom resets when product is turned on).

Factory Reset

This option restores the Ovation F-415VW to factory default settings.
1. Go to the Reset Factory main level.
2. Select No or Yes.
Page 12 of 20
Ovation F-415VW User Manual Rev. 4
Page 17
OPERATION

DMX Values

19Ch

Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100% 2 Dimmer fine 000 255 0–100% 3Red 000 255 0–100% 4Red fine 000 255 0–100% 5 Orange 000 255 0–100% 6 Orange fine 000 255 0–100% 7Green 000 255 0–100% 8Green fine 000 255 0–100%
9 Royal blue 000 255 0–100% 10 Royal blue fine 000 255 0–100% 11 Blue 000 255 0–100% 12 Blue fine 000 255 0–100% 13 Lime 000 255 0–100% 14 Lime fine 000 255 0–100%
15 Strobe
16 Color temperature 000 255 Refer to Color Temperature DMX Chart 17 Hue 000 255 -25–25 18 Zoom 000 255 Narrow to wide
19 Red shift
000 010 No function 011 255 Strobe, slow to fast
000 010 No function 011 127 On 128 255 Off

17Ch

Channel Function Valu e Percent/Setting
1Dimmer 000 255 0–100%
2 Dimmer fine 000 255 0–100%
3Red 000 255 0–100%
4Red fine 000 255 0–100%
5Orange 000 255 0–100%
6 Orange fine 000 255 0–100%
7Green 000 255 0–100%
8Green fine 000 255 0–100%
9 Royal blue 000 255 0–100% 10 Royal blue fine 000 255 0–100% 11 Blue 000 255 0–100% 12 Blue fine 000 255 0–100% 13 Lime 000 255 0–100% 14 Lime fine 000 255 0–100%
15 Strobe
16 Zoom 000 255 Narrow to wide
17 Red shift
000 010 No function 011 255 Strobe, slow to fast
000 010 No function 011 127 On 128 255 Off
Ovation F-415VW User Manual Rev. 4
Page 13 of 20
Page 18

14Ch

Channel Function Val ue Percent/Setting
1 Dimmer 000 255 0–100% 2Red 000 255 0–100% 3 Orange 000 255 0–100% 4Green 000 255 0–100% 5 Royal blue 000 255 0–100% 6Blue 000 255 0–100% 7Lime 000 255 0–100%
8Strobe
9 Color temperature 000 255 Refer to Color Temperature DMX Chart
10 Hue 000 255 -25–25
Dimmer speed
11
12 Zoom 000 255 Narrow to wide
13 Motor reset
14 Red shift
(Hold for 3 seconds, then release: Overrides and changes menu selection)
000 010 No function 011 255 Strobe, slow to fast
000 051 Current dimmer speed mode 052 101 Linear dimmer 102 152 Nonlinear dimming curve 1 (fastest) 153 203 Nonlinear dimming curve 2 204 255 Nonlinear dimming curve 3
000 200 No function 201 220 Motor reset 221 255 No function 000 010 No function 011 127 On 128 255 Off
OPERATION

10Ch

Channel Function Val ue Percent/Setting
1 Dimmer 000 255 0–100% 2Red 000 255 0–100% 3 Orange 000 255 0–100% 4Green 000 255 0–100% 5 Royal blue 000 255 0–100% 6Blue 000 255 0–100% 7Lime 000 255 0–100%
8Strobe
9 Zoom 000 255 Narrow to wide
10 Red shift
000 010 No function 011 255 Strobe, slow to fast
000 010 No function 011 127 On 128 255 Off
7Ch
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100% 2 Dimmer fine 000 255 0–100% 3 Color temperature 000 255 Refer to Color Temperature DMX Chart 4Hue 000 255 -25–25 5 Zoom 000 255 Narrow to wide
6Strobe
7 Red shift
000 010 No function 011 255 Strobe, slow to fast 000 010 No function 011 127 On 128 255 Off
Page 14 of 20
Ovation F-415VW User Manual Rev. 4
Page 19
OPERATION

7Ch2

Channel Function Value Percent/Setting
1Red 000 255 0–100% 2 Orange 000 255 0–100% 3Green 000 255 0–100% 4 Royal blue 000 255 0–100% 5Blue 000 255 0–100% 6Lime 000 255 0–100% 7 Zoom 000 255 Narrow to wide
5Ch
Channel Function Value Percent/Setting
1Dimmer 000 255 0–100%
2 Color temperature 000 255 Refer to Color Temperature DMX Chart
3Hue 000 255 -25–25
4Zoom 000 255 Narrow to wide
000 010 No function
5Red shift
2Ch
Channel Function Value Percent/Setting
1Dimmer 000 255 0–100% (color set through menu)
2Red shift
011 127 On 128 255 Off
000 010 No function 011 127 On 128 255 Off
Ovation F-415VW User Manual Rev. 4
Page 15 of 20
Page 20
TECHNICAL INFORMATION

5. Technical Information

Product Maintenance

To maintain optimum performance and minimize wear, clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency.
Clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear.
To clean the product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Page 16 of 20
Ovation F-415VW User Manual Rev. 4
Page 21
TECHNICAL SPECIFICATIONS
UL 1573
CSA C22.2 No. 166
E113093
R

6. Technical Specifications

Dimensions and Weight

Length Width Height Weight
15.80 in (401 mm) 11.22 in (285 mm) 9.51 in (242 mm) 12.79 lb (5.8 kg)
Note: Dimensions in inches rounded to the nearest hundredth.

Power

Power Supply Type Range Voltage Selection
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
Parameter 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz
Consumption 129 W 130 W 132 W
Operating Current 1.06 A 0.63 A 0.57 A
Power-linking current
(products)
Power I/O U.S./Canada Worldwide
Power input connector Neutrik® powerCON® A Neutrik® powerCON® A
Power output connector Neutrik® powerCON® B Neutrik® powerCON® B
Power cord plug Edison (U.S.) Local plug

Light Source

Type Color Quantity Power Current Lifespan
LED
Royal blue
Lime green
13.6 A (12 products) 13.6 A (21 products) 13.6 A (23 products)
Red
Orange
Green
Blue
4
10
4 6 6
16
3-4 W 1 A 50,000 hours

Photometrics

Thermal

Maximum External Temperature Cooling System
DMX
Ordering
Product Name Item Code UPC Number
Ovation F-415VW 03031481 781462218294
Parameter Values
Beam Angle 14° to 43°
Field Angle 27° to 68°
Zoom Angle 27° to 68° Illuminance @ 5 m (30°) 939 lux Illuminance @ 5 m (73°) 183 lux
113 °F (45 °C) Fan-assisted convection
I/O Connector Channel Range
5-pin XLR 2, 5, 7, 7, 10, 11, 17, and 19
Ovation F-415VW User Manual Rev. 4
Page 17 of 20
Page 22
TECHNICAL SPECIFICATIONS
Beam FieldField
Beam FieldField

Photometrics Charts

Narrow (27°)
14° Beam
Distance
15 ft 3.68 ft 7.20 ft 104 20 11.82 ft 20.24 ft
20 ft 4.91 ft 9.60 ft 59 11 15.76 ft 26.98 ft
30 ft 7.37 ft 14.40 ft 26 5 23.63 ft 40.47 ft
40 ft 9.82 ft 19.21 ft 15 3 31.51 ft 53.96 ft
50 ft 12.28 ft 24.01 ft 9 2 39.39 ft 67.45 ft
75 ft 18.42 ft 36.01 ft 4 1 59.09 ft 101.18 ft
100 ft 24.56 ft 48.02 ft 2 0 78.78 ft 134.90 ft
125 ft 30.70 ft 60.02 ft 2 0 98.48 ft 168.63 ft
Diameter
27° Field
Diameter
Footcandle Footcandle
Light Source (Imperial)
Wide (68°)
43° Beam
Diameter
68° Field Diameter
150 ft 36.84 ft 72.02 ft 1 0 118.17 ft 202.35 ft
Narrow (27°)
14° Beam
Distance
1 m 0.25 m 0.48 m 23,457 4,575 0.79 m 1.35 m
2 m 0.49 m 0.96 m 5,869 1,144 1.58 m 2.70 m
5 m 1.23 m 2.40 m 939 183 3.94 m 6.75 m
8 m 1.96 m 3.84 m 367 71 6.30 m 10.79 m
10 m 2.46 m 4.80 m 235 46 7.88 m 13.49 m
15 m 3.68 m 7.20 m 104 20 11.82 m 20.24 m
20 m 4.91 m 9.60 m 59 11 15.76 m 26.98 m
Diameter
27° Field Diameter
Lux Lux
Light Source (Metric)
Wide (68°)
43° Beam
Diameter
68° Field Diameter
25 m 6.14 m 12.00 m 38 7 19.70 m 33.73 m
30 m 7.37 m 14.40 m 26 5 23.63 m 40.47 m
Page 18 of 20
Ovation F-415VW User Manual Rev. 4
Page 23

Returns

!
!
!
Returns
To get support or to return a product, contact:
If you are located in the U.S., contact Chauvet World Headquarters.
If you are located in the U.K. or Ireland, contact Chauvet Europe Ltd.
If you are located in Benelux, contact Chauvet Europe BVBA.
If you are located in France, contact Chauvet France.
If you are located in Germany, contact Chauvet Germany.
If you are located in Mexico, contact Chauvet Mexico.
If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local distributor. See www.chauvetprofessional.com Benelux, France, Germany, or Mexico.
If you are located outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor of record and follow their instructions on how to return Chauvet products to them. Visit our website www.chauvetprofessional.com
Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause for the return.
To submit a service request online, go to www.chauvetprofessional.com/service-request Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet
will not issue call tags. Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA
number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
for distributors outside the U.S., U.K., Ireland,
for contact details.
.
Before sending the product, clearly write the following information on a piece of paper and place it inside the box:
Your name
Your address
Your phone number
RMA number
A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned product(s).
Ovation F-415VW User Manual Rev. 4
Page 19 of 20
Page 24

Contact Us

General Information Technical Support
Chauvet World Headquarters
Address: 5200 NW 108th Ave. Voice: (844) 393-7575
Chauvet Europe Ltd
Brookhill Road Industrial Estate
Chauvet Europe BVBA
Chauvet France
Chauvet Germany
Address: Bruno-Bürgel-Str. 11
Chauvet Mexico
Address: Av. de las Partidas 34 - 3B
Lerma, Edo. de México, CP 52000
CONTACT US
Sunrise, FL 33351 Fax: (954) 756-8015
Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com
Fax: (954) 929-5560
Toll Free: (800) 762-1084 Website: www.chauvetprofessional.com
Address: Unit 1C Email: UKtech@chauvetlighting.eu
Pinxton, Nottingham, UK Website: www.chauvetprofessional.eu
NG16 6NT
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110
Address: Stokstraat 18 Email: BNLtech@chauvetlighting.eu
9770 Kruishoutem
Belgium Website: www.chauvetprofessional.eu
Voice: +32 9 388 93 97
Address: 3, Rue Ampère
91380 Chilly-Mazarin
France Website: www.chauvetprofessional.eu
Voice: +33 1 78 85 33 59
28759 Bremen
Germany Website: www.chauvetprofessional.eu
Voice: +49 421 62 60 20
(Entrance by Calle 2)
Zona Industrial Lerma Website: www.chauvetprofessional.mx
Voice: +52 (728) 690-2010
Email: FRtech@chauvetlighting.fr
Email: DEtech@chauvetlighting.de
Email: servicio@chauvet.com.mx
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, France, Germany, Benelux, or Mexico, contact the dealer of record.
Page 20 of 20
Ovation F-415VW User Manual Rev. 4
Loading...