Chauvet ColorAdo 1-Quad Zoom Tour User Manual

User Manual

Edition

The Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 covers the description, safety

User Manual in

December 2014.

Trademarks

CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or

the CHAUVET® nam e and the dotted

. Any other

names, and other tradem arks featured or referred to

within this document are the property of their respective trademark holders.

Copyright Notice

Chauvet owns the content of this User Manual in its entirety, including but not limited to

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes it s c us tomers to download and pr i nt th is manual for profess ional inf ormation

Chauvet.

Document

Printing

For better results, pr int this docum ent in c olor, on lette r si ze paper (8.5 x 11 i n), d ouble-sided. If

Intended

Any person in charge of ins talling, operating, an d/or m aintaining this product sh ould com pletely
operating, or maintaining this product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects.

a revision of this manual or a new edition to incorporate such changes.

Document

Revision

The Colorado™ 1-Quad Zoom Tour User Man ual Re v. 1 is th e first edition of this manual. Go t o

Author

Date

Editor

Date

D. Couppe

12/10/14

A. Leon

12/10/14

Edition Notes

Notes

precautions, instal lation, programming, oper ation, and maintenance of the Colorado™ 1-Quad
Zoom Tour. Chauvet releas ed this editi on of the Col ora do™ 1-Qua d Z oom Tour

Chauvet). The CHAUVET® log o in its entirety including
triangle, and all other trade marks in this manual pertaining to s ervices, products, or marketing
statements (example: It’s Green Thinking™) are owned or licensed by Chauvet
product names, logos, bra nds, company

pictures, logos, trademarks, and resources.

© Copyright 2014 Chauvet. All rights reserved.

purposes only. Chauvet expr essly prohibits th e usage, cop y, storage, distribut ion, modif ication,
or printing of this manual or its content for any other purpose without written consent from

using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.

Audience

read through the guide tha t shipped with the product, as well as this manual, before installing,

However, Chauvet assumes no responsibility for any errors or omissions in this document.
Chauvet reser ves the r ight to revise a nd m ak e change s to the co nte nt of this doc um ent without
obligation that Chauvet notif y any person or company of such revision or changes. This does
not in any way constitute a commitment by Chauvet t o make such changes. Chauvet may issue

www.chauvetprofessional.com for the latest version.

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

Table of Contents

Table of Contents

1. Before You Begin ...................................................................................................................................... 1

What Is Included ........................................................................................................................................................... 1

Claims .......................................................................................................................................................................................... 1

Manual Conventions .................................................................................................................................................................... 1

Symbols ....................................................................................................................................................................................... 1

Product At A Glance ..................................................................................................................................................... 1

Safety Notes ................................................................................................................................................................. 2

Personal Safety ............................................................................................................................................................................ 2

Mounting And Rigging .................................................................................................................................................................. 2

Power And Wiring ........................................................................................................................................................................ 2

Operation ..................................................................................................................................................................................... 2

Expected LED Lifespan ................................................................................................................................................ 2

2. Introduction ............................................................................................................................................... 3

Description .................................................................................................................................................................... 3

Features ........................................................................................................................................................................ 3

Overview ....................................................................................................................................................................... 4

Dimensions ................................................................................................................................................................... 5

3. Setup .......................................................................................................................................................... 6

AC Power ...................................................................................................................................................................... 6

AC Plug ........................................................................................................................................................................................ 6

Power Linking ............................................................................................................................................................... 6

DMX Linking.................................................................................................................................................................. 6

DMX Personalities ........................................................................................................................................................................ 6

Master/Slave Connectivity ............................................................................................................................................................ 6

Mounting ....................................................................................................................................................................... 7

Orientation ................................................................................................................................................................................... 7

Rigging ......................................................................................................................................................................................... 7

Procedure .................................................................................................................................................................................... 7

4. Operation ................................................................................................................................................... 8

Control Panel Description ............................................................................................................................................. 8

Control Options ............................................................................................................................................................................ 8

Programming................................................................................................................................................................................ 8

Control Panel Lock ....................................................................................................................................................... 8

Passcode ..................................................................................................................................................................................... 8

Settings Lock ................................................................................................................................................................ 8

Menu Map ..................................................................................................................................................................... 9

Menu Map (Cont.) ....................................................................................................................................................... 10

Menu Map (Cont.) ....................................................................................................................................................... 11

Configuration (Standalone) ......................................................................................................................................... 12

Auto Programs ........................................................................................................................................................................... 12

Edit Custom Programs .............................................................................................................................................................. 12

Master/Slave .............................................................................................................................................................................. 12

Color Settings............................................................................................................................................................................. 12

Dimmer Profiles .......................................................................................................................................................................... 13

Curve Settings............................................................................................................................................................................ 13

Program Upload ......................................................................................................................................................................... 13

Reset .......................................................................................................................................................................................... 13

Whites Setting ............................................................................................................................................................................ 14

Whites Setting Fac tory Reset ..................................................................................................................................................... 14

White Calibration ........................................................................................................................................................................ 14

Static Color ................................................................................................................................................................................ 14

Configuration (DMX) ................................................................................................................................................... 15

DMX Personalities ...................................................................................................................................................................... 15

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -i-

Table of Contents

DMX Control............................................................................................................................................................................... 15

Loss Of Signal Setting ................................................................................................................................................................ 15

Zoom Limit Settings ................................................................................................................................................................... 15

DMX Values ................................................................................................................................................................ 16

DMX Values (Cont.) .................................................................................................................................................... 17

DMX Values (Cont.) .................................................................................................................................................... 18

DMX Values (Cont.) .................................................................................................................................................... 19

DMX Values (Cont.) .................................................................................................................................................... 20

DMX Values (Cont.) .................................................................................................................................................... 21

DMX Values (Cont.) .................................................................................................................................................... 22

DMX Values (Cont.) .................................................................................................................................................... 23

DMX Values (Cont.) .................................................................................................................................................... 24

COLORado™ 1-Quad Zoom Tour Pixel Selection for DMX Control .......................................................................... 24

DMX Values (Cont.) .................................................................................................................................................... 25

DMX Values (Cont.) .................................................................................................................................................... 26

5. Technical Information ............................................................................................................................. 27

Product Maintenance .................................................................................................................................................. 27

6. Technical Specifications ......................................................................................................................... 28

Returns ....................................................................................................................................................................... 29

Contact Us ................................................................................................................................................... 29

-ii- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

1. BEFORE YOU BEGIN

What Is

• Colorado™ 1-Quad Zoom Tour

Quick Reference Guide

Claims

Carefully unpack the pr oduct immediately and check the box to m ake sure all the parts are in

uded accessories) appear damaged from

. Failure to

concealed damage, file a claim with Chauvet within 7 days of delivery.

Manual

Convention

Meaning

1–512

A range of values in the text

50/60

A set of mutually exclus i ve values in the tex t

<SET>

A button on the product’s control panel

Settings

A product function or a menu option

MENU>Settings

A sequence of menu options

1–10

A range of menu values from which to choose in a menu

Yes/No

A set of two mutually exclusive menu options in a menu

ON

A unique value to be entered or selected in a menu

Symbols

Critical installation, configuration, or operation information. Failure to
damage third-party equipment, or cause harm to the operator.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Product At A

x

P

x

Auto-Ranging Power
Supply

P

P

P

P

x

Before You Begin

Included

Conventions

• Neutrik® powerCON® power cord

• Gel frame holder (7.5 in/191 mm accessories)

• Gel frame

• Safety cable

• Warranty Card

•

the package and are in good condition.
If the box or the contents (the product and incl
shipping or show signs of m ishandling, notify the carrier immediately, not Chauvet
report damage to the c arrier immediately may inval idate your claim. In addition, k eep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or

Symbols Meaning

comply with this information may cause the product not to work,

Important installation or configuration information. Failure to comply
with this information may keep the product from working.

Useful information.

Auto Programs

Replaceable Fuse
User-Serviceable

Use on Dimmer

Glance

Outdoor Use
Master/Slave

DMX

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -1-

Safety Notes

Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any referen ce to serv icing in this User
housing or attempt any repairs.

Personal Safety

• Avoid direct eye exposure to the light source while the product is on.

• Do not touch this product’s housing during operation because it may be very hot.

Mounting And

• This product is for indoor use only! To prevent risk of fire or shock, do not expose this

(included).

Power And

• Always make sure you are connecting this product to the proper voltage in accordance with

• Never disconnect this product by pulling or tugging on the power cable.

Operation

• Do not operate this product if you see damage on the housing, lenses, or cables. Have the

• In case of a serious operating problem, stop using this produc t im mediately!

In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.

Expected LED

LEDs gradually decline in brightnes s over time, mostly because of heat. Packaged in clusters,

LED conditions. For this

projection intensity may also help to extend the LEDs’ lifespan.

Before You Begin

Manual will only apply to properly trained Chauvet certified technicians. Do not open the

All applicable local codes and regulations apply to proper installation of this product.

• Always disconnect this product from its power source before servicing.

• Always connect this product to a grounded circuit to avoid the risk of electrocution.

Rigging

Wiring

product to rain or moisture. (IP20)

• CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.

• Make sure there are no flammable materials close to this product while it is operating.

• When hanging this product, always secure to a fastening device using a safety cable

the specifications in this manual or on the product’s specification label.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.

• Never connect this product to a dimmer pack or rheostat.

damaged parts replaced by an authorized technician at once.

• Do not cover the ventilation slots when operating to avoid internal overheating.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a

higher temperature.

Lifespan

-2- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

LEDs exhibit higher operating temperatures than in ideal, single­reason, using clustered LEDs at their fullest intens ity significantly reduces the LEDs’ lifespan.
Under normal conditions , this lifes pan can be 40,0 00 to 50, 000 ho urs. I f extendi ng this lifes pan
is vital, lower the o perating temperature by impr oving the ventilation around th e product and
reducing the ambient temperature to an optim al operating range. In addition , limiting the overall

2. INTRODUCTION

Description

The COLORado™ 1-Quad Zoom Tour is a high-power quad-color (RG BW) LED wash product
with color mixing and zoom control. This product consists of a single module that houses the

Quad Zoom Tour

bracketed yoke that c an serve as a floor mount or hanging

support bracket.

Features

• 3, 4, 5, 6, 7, 10, 12, 17 or 25-channel quad-color LED wash product

• 3- and 5-pin DMX input/output connections

internal power supply, the control pane l, th e L ED dr iv ers , the L ED boards , and motorized moving
lenses, as well as the power and signal connectors. The COLORado™ 1­features a variable zoom, which enables th e user to change the b eam angle of the produc t via
DMX or control panel, and a double-

• Operating modes:

• 3-channel: RGB control

• 3-channel: HSV control

• 4-channel: RGB, dimmer

• 4-channel: RGBW

• 5-channel: RGBW, dimmer

• 6-channel: RGBW, dimmer, strobe

• 7-channel: RGBW, dimmer, zoom, zoom reset

• 10-channel: RGBW, dimmer, strobe, color macro, auto/custom, dimmer speed, auto

speed **

• 12-channel: RGBW, dimmer, strobe, color macro, auto/custom, dimmer speed, auto
speed, zoom, zoom reset

• 17-channel: 16-bit RGBW and dimmer; strobe, color macro, auto/custom, dimmer speed,
auto speed, zoom, zoom reset

• 17-channel: 16-bit RGBW and dimmer; strobe, color macro, auto/custom, dimmer speed,
auto speed, zoom, zoom reset

• 25-channel: 16-bit RGBW pixel control and dimmer; strobe, color macro, auto/custom,
dimmer speed, auto speed, zoom, zoom reset

• Built-in auto and custom programs recalled via DMX and Master/Slave

• RGBW color mixing via DMX or manually

• Zoomable, with a wide zoom range for design versati l i t y

• Tough road-ready construction

• Individual control of outer pixel ring and center pixel

• Selectable, smooth dimming curves for programming versatility

• 16-bit dimming of individual colors as well as master dimmer

• Neutrik® powerCON® power input/output connections

Introduction

**Zoom locked to match Colorado™ 1-Quad series.

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -3-

Front View

Rear View

Side View

Bracket Adjustment Knob

Power In /Out

3- Pin DMX In/Out

5-Pin DMX In/Out

Control Panel

Double-Bracketed Yoke

Introduction

Overview

-4- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

Dimensions

9.37 in

238 mm

9.25 in

235 mm

13.14 in
334 mm

7.48 in

190 mm

Introduction

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -5-

AC Power

Each Colorado™ 1-Quad Zoom Tour has an auto-rang ing po wer supply that works with an input

requirements f or each

:

http://www.chauvetlighting.com/download/.

Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.

Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% sw itch .

AC Plug

The Colorado™ 1-Quad Zoom Tour comes with a pow er input cord terminated with a Neutrik®

plug, use the table below to wire the new plug.

AC Live

Black

Brown

Yellow or Brass

AC Neutral

White

Blue

Silver

AC Ground

Green/Yellow

Green/Yellow

Green

Power Linking

The Colorado™ 1-Quad Zoom Tour supports power linking. You can power link up to
input cord. Power linking cables are available from Chauvet for purchase.

DMX Linking

You can link the Colorado ™ 1-Quad Zoom Tour to a DMX controller usin g a 3- or 5-pin DMX

,

you can control each individually with a single DMX controller.

DMX

The Colorado™ 1-Quad Zoom T our uses a 3- or 5-pin DMX dat a conn ectio n for its 3, 4, 5, 6, 7,

personalities.

If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a DMX

http://www.chauvetlighting.com/download/.

Master/Slave

The Master/Slave m ode allows a C olorado™ 1-Qua d Z oom T our (the master ) to control one or

operation, the slaves will operate in unison with the master.

DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX

The Operation section of this manual provides detailed instructions on how to configure
the master and slaves.

Setup

3. SETUP

voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power
Colorado™ 1-Quad Zo om Tour, refer to the label af fixed to the product. You can also ref er to

Technical Specifications chart in this manual.

the
The listed current r ati ng in d icates t he maximum current dr a w dur i ng normal operation. For more
information, you may download Sizing Circuit Breakers from the Chauvet website

powerCON® A connector on one end and an Edis on plug on the oth er end (U.S. m arket). If the
power input cord that cam e with your product has no plug, or if you need to chan ge the Edison

Connection Wire (U.S.) Wire (Europe) Screw Color

Personalities

Connectivity

12 products at 120 V; up to 21 at 208 V; or up t o 23 at 230 V. This produc t com es with a p ower

connection. If using other DMX-compatible products with the Colora do™ 1-Quad Zoom Tour

10, 12, 17, or 25-channel DMX personalities.

• Refer to the Introduction chapter for a brief description of each DMX personality.

• Refer to the Operation chapter to learn how to configure the Colorado™ 1-Quad Zoom Tour

to work in these personalities.

• The DMX Values secti on prov ides you with deta iled information regarding the DMX

controller, download the DMX Primer from the Chauvet website:

more Colorado™ 1-Quad Zoom Tours (the slaves) without a DMX controller. One Colorado™ 1­Quad Zoom T our becomes the m aster w hen run ning a n aut o or cust om progr am , or by bein g in
a Static mode.
You must configure each s lave’s control panel to op erate in Slave mode. During Master/Slave

controller signals may interfere with the signals from the master.

-6- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

Setup

Mounting

Before mounting this product, read and follow the Safety Notes. For our Chauvet line of
mounting clamps, go to http://trusst.com/products/.

Orientation

Always mount this product in a safe position and make sure there is adequate room for

Rigging

Chauvet recommends using the following general guidelines when mounting this product.

• When selecting an installation location, consider easy access to this product for operation,

our Chauvet line of safety cables, go to http://trusst.com/products/.

Procedure

The Colorado™ 1-Quad Zoom Tour comes with a double-bracketed yoke to which you can

are capable of supporting the weight of this

go to http://trusst.com/products/.

Floor Mounting

Overhead Mounting

Safety Cable

Mounting Clamp

ventilation, configuration, and maintenance.

programming adjustments, and routine maintenance.

• Make sure to mount this product away from any flammable material as indicated in the

Safety Notes

• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.

• If hanging this product, make sure that the mounting location can support the product’s
weight. See the Tec hnic al Specif icat io ns
product.

• When hanging this product, always secure to a fastening device using a safety cable. For

either attach mountin g cla m ps for hanging or s im pl y use as a f loor s tand. You m ust suppl y your
own mounting clamps. Make sure the clamps
product. Use at least one m ounting point per produc t. For our Chauvet line of mounting cl am ps,

.

for the weight-bearing requirements of this

Mounting Diagram

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -7-

Control Panel

Button

Function

<MENU>

Exits from the current menu or function

<ENTER>

Enables the currently displayed menu or sets the currently selected
value in to the current function

<UP>

Navigates upward through the menu list or increases the numeric
value when in a function

<DOWN>

Navigates downward through the menu list or decreases the numeric
value when in a function

Control Options

You can set the Color ado™ 1-Quad Zoom Tour starting ad dress in the 001–512 DMX range.
This enables control of up to 20 products in the 25-channel FULL personality.

Programming

Refer to the Menu Map to under stand the menu options . The menu map shows the m ain level

• Press <MENU> repeatedly to exit to the previous main level.

Control Panel

This setting enables you to activate or disable the control panel lock, which keeps non-

2. Select ON or OFF.

When the control panel lock is activated, in order to access the products main
programming level, the product will prompt you to enter the passcode. Enter the
passcode as described in Passcode.

Passcode

After being prompted to enter the passcode:

• Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.

Settings Lock

This setting enables you to activate or disable the settings lock, which keeps non-authorized

3. Select ON or OFF.

When the settings lock is activated, in order to access the SET programming levels, the

bed in

Passcode.

Operation

4. OPERATION

Description

and a variable number of programming levels for each option.

• To go to the desired main level, press <MENU> repeatedly until the option shows on the

• To select an option or value within the current programming level, press <UP> or <DOWN>

display. Press <ENTER> to select. This will take you to the first programming level for that
option.

until the option shows on the display. Press <ENTER> to select. In this case, if there is
another programming level, you will see that first option, or you will see the selec t ed val ue.

Lock

authorized personnel from changing the product’s settings.

1. Go to the KEY main level.

personnel from making any changes to the programming levels under the SET main level.

1. Go to the SET main level.

2. Select SLCK.

product will prompt you to enter the passcode. Enter the passcode as descri

-8- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

Menu Map

RED

R.

GREN

G.

BLUE

B.

WHIT

W.

ZOOM

Z.

Changes the beam angle (Zoom)

Selects the strobe frequency
(0–20 Hz)

AT.

01–10

P.

000–255

10 automatic programs and speed

PR.

01–10

10 customizable programs

DMX

DMX mode

SLAV

Slave mode

ADDR

D.

001–512

Selects the DMX starting address

12-channel: RGBW, dimmer, strobe, color
speed, zoom, zoom reset

17-channel: 16-bit RGBW and dimmer;
speed, auto speed, zoom, zoom reset

17-channel: 16-bit RGBW and dimmer;
speed, auto speed, zoom, zoom reset

25-channel: 16-bit RGBW pixel control and

reset

10-channel: RGBW, dimmer, strobe, color
speed **

ARC.1

3-channel: RGB control

AR1.D

4-channel: RGB, dimmer

ARC.2

4-channel: RGBW

AR2.D

5-channel: RGBW, dimmer

AR2.S

6-channel: RGBW, dimmer, strobe

7-channel: RGBW, dimmer, zoom, zoom
reset

HSV

3-channel: HSV control

Main Level Programming Levels Description

Combines red, green, blue, and white to

000–255

STAT

STRB S. 00–20

AUTO

RUN

make a custom color (0–100%)

Operation

PERS

TOUR

TR16

STD.Y

FULL

C1Q

AR2.Z

macro, auto/custom, dimmer speed, auto

strobe, color macro, auto/custom, dimmer

strobe, color macro, auto/custom, dimmer

dimmer; strobe, color macro, auto/custom,
dimmer speed, auto speed, zoom, zoom

macro, auto/custom, dimmer speed, auto

**Zoom locked to match Colorado™ 1-Quad series.

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -9-

RED

GREN

BLUE

WHIT

ZOOM

Selects beam angle (zoom)

Selects the strobe frequency
(0–20 Hz)

Defines the step duration
(slow to fast)

Defines the fade duration
(slow to fast)

ON

OFF

****

Passcode)

****

(Enter Passcode)

OFF

RGB set to 255 = max. output

RGBW

RGB set to 255 = balanced white

UC.

Universal color balance

OFF

No dimmer

DIM1

DIM2

DIM3

DIM4

OFF

No dimmer

CV1

CV2

CV3

Continues with last command upon loss of
DMX control

BLAK

Blacks out fixture upon loss of DMX

OFF

ON

Sets default zoom position
(full movement)

POS1

Sets position 1 setting for zoom limit

POS2

Sets position 2 setting for zoom limit

Operation

Menu Map (Cont.)

Main Level Programming Levels Description

EDIT PR. 01–10 SC. 01–30

KEY

UPLD

(Enter

REST

COLR

000–

255

STRB 00–20

TIME

FADE

000–

255

SEND/

END

Combines red, green, blue, and white to
generate a custom color (0–100%)

Turns the passcode on or off

Uploads custom programs to other
COLORado™ 1-Quad Zoom Tour products

Defaults product to factory settings

DIMX

SET

CURV

DERR

SLCK

ZOOM

-10- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

Dimmer profiles fast (DIM1) to slow (DIM4)

Dimmer curves fast (CV1) to slow (CV3)

SAVE

SET main level access lock

BASE

Menu Map (Cont.)

RED

GREN

BLUE

WHIT

RED

GREN

BLUE

****

Passcode)

POS.1

POS.2

Main Level Programming Levels Description

Operation

****

CAL

(Enter

Passcode)

ZOOM

CAL1

CAL2

CALR

WH.

01–11

P. 000–255

(Enter

Modifies the color macros used in the TOUR,

FULL, C1Q, TR16, and STD.Y personalities

000–

255

Defines the color temperature used when
COLR is set to RGBW

Defaults CAL to factory settings

Sets the min/max position of the zoom function

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -11-

Configuration

Use standalone configuration to operate the product without a DMX controller.

Auto Programs

Auto programs allow for dynamic RGBW color mixing without a DMX controller.

custom program (PR. 01–10).

You cannot edit any of the auto programs (AUTO 01–10); however, you can edit the
custom programs (PR.01–10). See Edit Custom Programs for details.

Edit Custom

This setting allows the programming of up to 30 scenes for each of the 10 customizable

8. Repeat the settings of colors, effects, and timers for the other scenes.

Master/Slave

The Master/Slave mode allows a group of Colorado™ 1-Quad Zoom Tours (the slaves) to

(the master)

colors.

• The master is the one that runs a program whether in Auto, Custom or Static Color

• The master should be the first product in the daisy chain.

Color Settings

The COLOR s etting determines how the Colorado™ 1-Quad Zoom Tour generates the wh ite

OFF:

When all the RGB faders are set to 255, the output is maximum, although
the resulting white color may not be balanced.

RGBW:

When all the RGB faders are set to 255, the resulting output is defined by
the configured white color (see White Calibration).

UC:

When all the RGB faders are set to 255, the output matches that of less
efficient products (Universal Color).

Operation

(Standalone)

1. Go to the AUTO main level.

2. Select the desired auto program (AT. 01–10) and speed of the program (P. 000–255) or

Programs

programs, including colors and effects.

1. Go to the EDIT main level.

2. Select the desired custom program (PR. 01–10).

3. Select the desired scene (SC. 01–30).

4. Select the desired color, effect, or timer (RED, GREN, BLUE, WHIT, STRB, ZOOM, TIME,
or FADE).

5. Select the color, effect, or timer value (000–255 for colors, effects, and timers or 00–20 for
strobe).

6. Repeat for the other colors, effects, or timers.

7. Return to the scene (SC. 01–30) level.

simultaneously duplicate the output of another Colorado™ 1-Quad Zoom Tour
without a DMX controller.

1. Set each of the slaves:
a. Go to the RUN main level.
b. Select SLAVE.

2. Set the master:
a. Set the running mode to DMX as explained in DMX Control
b. Select an auto or custom program as explained in Auto Programs, or a static mix of

mode.

• Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.

.

color based on various RGB settings.

1. Go to the SET main level.

2. Select COLR.

3. Select OFF, RGBW, or UC.

-12- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

Operation

Dimmer Profiles

This setting determines how fast the output of the Colorado™ 1-Quad Zoom Tour changes

tions to simulate the dimming curve of an incandescent lighting

3. Select a dimmer curve (OFF, DIM1, DIM2, DIM3, or DIM4).

OFF:

The output is proportional (linear) to the dimmer and RGBW channel values.

DIM1–4:

The output follows the dimmer and RGBW channel values based on the
corresponding dimmer curve, DIM1 being the fastest and DIM4 the slowest.

Curve Settings

This setting allows you to s elect the dimm er curve shape using the r ed, green, blue, white, and

3. Select a dimmer curve (OFF, CV1, CV2, or CV3).

OFF:

The output is proportional (linear) to the dimmer and RGBW channel values.

CV1–3:

The output follows the dimmer and RGBW channel values based on the
corresponding dimmer curve, CV1 being the fastest and CV3 the slowest.

For optimum control of the 16-bit dimming channels in the TR16, FULL, and STD.Y
personalities, be sure that both dimming curves in SET > DIM and SET > CURV are set to
OFF.

When the control panel lock is active, the product will prompt you to enter the passcode

ee

Passcode.

Program Upload

This option allows you to copy the c us tom programs of one Colorado™ 1-Quad Zoom Tour onto

The master and slaves will provide the status of the process by lighting up as follows:

Support.

DO NOT upload the data from a Colorado™ 1-Quad Zoom Tour to a different product. The
other product may become inoperative.

Reset

to the default values,

when you modify the values of the red, green, blue, white, and dimmer faders. This setting
provides four different op
product.

1. Go to the SET main level.

2. Select DIMX.

dimmer faders.

1. Go to the SET main level.

2. Select CURV.

after 30 seconds of control panel inactivity or after turning on the product. S

other Colorado™ 1-Quad Zoom Tour by using the Master/Slave mode.

1. Configure and connect the products in a Master/Slave arrangement, where the master has
the custom programs you want to transfer to the slaves.

2. From the master, go to the SET main level.

3. Select UPLD.

4. When PASS shows, press <ENTER>.

5. Enter the master access passcode as shown in Passcode

.

6. When SEND shows, press <ENTER> to start the upload.

7. Wait for the upload process to finish (the display will show END before continuing or turning
the products off.

• Yellow indicates that the upload process is running.

• Green indicates that the upload process completed successfully.

• Red indicates that the upload process failed due to an error. Recheck all cable

connections and restart the process. If the issue persists, contact Chauvet Technical

This setting allows you to reset the Colorado™ 1-Quad Zoom Tour
including the custom programs.

1. Go to the SET main level.

2. Select REST.

3. When PASS shows, press <ENTER>.

4. Enter the master access passcode as described in Passcode

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -13-

5. Wait for the reset process to finish.

.

Whites Setting

This setting allows you to select and edi t the temperat ure of the white co lors used in chann el 6

7. Repeat for the other colors.

Whites Setting

Factory Reset

This setting allows you to reset to factor y default the white colors us ed in channel 6 (Macros)

modes, or

4. Enter the master access passcode as described in Passcode again.

White Calibration

This setting allows you to select the white color shown b y the Colorado™ 1-Quad Zo om Tour

6. Repeat for the other colors.

When selecting CAL > CAL2, you will only be able to define the values of RED, GREN
(green), and BLUE.

The values of RED, GREN (green), and BLUE configured from CAL > CAL2 will define the

> RGBW is

active.

Static Color

The Static Color mode allows for permanent RGBW color mixing without a DMX controller.

4. Repeat for the other colors or effects.

Operation

(Macros) when in the TOUR and C1Q mode, channel 11 when in the TR16 and STD.Y mode, or
channel 19 when in the FULL mode.

1. Go to the CAL main level.

2. Enter the master access passcode as described in Passcode

.

3. Go to CAL1.

4. Select a white color (WH.01–11).

5. Select a color (RED, GREN, BLUE, or WHIT).

6. Select a color value (000–255).

when in the TOUR and C1Q modes, channel 11 when in the TR16 and STD.Y
channel 19 when in the FULL mode.

1. Go to the CAL main level.

2. Enter the master access passcode as described in Passcode

.

3. Go to CALR.

when the color setting is RGBW and the DMX control ler’s red, gree n, and b lue fa ders ar e set to

255.

1. Go to the CAL main le vel.

2. Enter the master access passcode as described in Passcode

.

3. Go to CAL2.

4. Select a color (RED, GREN, or BLUE).

5. Select a color value (000–255).

color temperature shown when the RGB faders are set to 255 if SET > COLR

1. Go to the STAT main level.

2. Select the desired color or effect (RED, GREN, BLUE, WHIT, STRB, or ZOOM).

3. Select the color or effect value (000–255 for colors and effect, or 00–20 for strobe).

-14- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

Operation

Configuration

(DMX)

Use DMX configurations to operate the product with a DMX controller.

DMX

This setting allows you to choose a particular DMX personality.

AR2.D, AR2.S, AR2.Z, or HSV).

• See the DMX Values section for the highest starting address you can sele ct for each

the new personality setting.

DMX Control

In this mode, each product will respond to a unique starting address from the DMX controller. All

b. Select the starting address (001–512).

The highest recommended starting address for each DMX mode is as follows:

TOUR

501

ARC.2

509

HSV

510

ARC.1

510

AR2.D

508

TR16

496

AR1.D

509

AR2.S

507

STD.Y

496

FULL

488

C1Q

503

AR2.Z

506

Loss Of Signal

This setting controls how the product will respond when the DMX signal is lost.

b. Select BLAK to turn off the all the LEDs when the signal is lost.

Zoom Limit

These settings allow you to selec t the zoom range. Basic zoom (BASE) is the default setting

) and has no adjustable lim it. Position 1

c. Select a zoom limit value (P.000–255).

Personalities

1. Go to the PERS main level.

2. Select the desired personality (TOUR, TR16, STD.Y, FULL, C1Q, ARC.1, AR1.D, ARC.2,

personality.

• Make sure that the starting addresses on the various products do not overlap due to

products with the same starting address will respond in unison.

1. Select a DMX personality as shown in DMX Personalities.

2. Set the running mode:
a. Go to the RUN main level.
b. Select the DMX programming level.

3. Set the starting address:
a. Go to ADDR main level.

DMX

Personality

DMX

Address

DMX

Personality

DMX

Address

DMX

Personality

DMX

Address

Setting

Settings

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -15-

1. Go to the SET main level.

2. Select DERR.
a. Select SAVE to make the product use the last command used when the signal is lost.

which allows the zoom to move at full range (000–255
(POS.1) and Position 2 (POS.2) allow you to set limits on how far the zoom moves.

1. Set the zoom range to be used:
a. Go to the SET main level.
b. Select ZOOM.
c. Select BASE, POS.1, or POS.2.

2. Set the limit for zoom range POS.1 or POS.2:
a. Go to the ZOOM main level.
b. Select POS.1 or POS.2.

TOUR

1

Dimmer

000ó255

0–100%

000ó255

0–100%
(Step Duration if Custom 1–10 in CH. 8 is active)

000ó255

0–100%
(Fade Duration if Custom 1–10 in CH. 8 is active)

4

Blue

000ó255

0–100%

5

White

000ó255

0–100%

000ó010

251ó255

No function

White 11

000ó009
010ó255

No function
0–20 Hz

Operation

DMX Values

Channel Function Value Percent/Setting

2 Red

3 Green

011ó030
031ó050
051ó070
071ó090
091ó110
111ó130
131ó150
151ó170

6

7 Strobe

Color Macro + White
Balance

171ó200
201ó205
206ó210
211ó215
216ó220
221ó225
226ó230
231ó235
236ó240
241ó245
246ó250

R: 100% G: 0–100% B: 0
R: 100%–0 G: 100% B: 0
R: 0 G: 100% B: 0–100%
R: 0 G: 100%–0 B: 100%
R: 0–100% G: 0 B: 100%
R: 100% G: 0 B: 100%–0
R: 100% G: 0–100% B: 0–100%
R: 100%–0 G: 100%–0 B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10

-16- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

DMX Values (Cont.)

TOUR

000ó040

231ó255

No function

Custom 10

000ó255

0–100%
(only when using Auto 1–10 in CH. 8)

000ó009

190ó255

Preset dimmer speed from display menu

Nonlinear dimming curve 4 (slowest)

11

Zoom

000ó255

0–100%

000ó200
221ó255

No function
No function

ARC.1

1

Red

000ó255

0–100%

2

Green

000ó255

0–100%

3

Blue

000ó255

0–100%

Channel Function Value Percent/Setting

(Cont.)

8 Programs

041ó050
051ó060
061ó070
071ó080
081ó090
091ó100
101ó110
111ó120
121ó130
131ó140
141ó150
151ó160
161ó170
171ó180
181ó190
191ó200
201ó210
211ó220
221ó230

Operation

Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Custom 8
Custom 9

9 Auto Speed

10 Dimmer Speed

12 Zoom Reset

Channel Function Value Percent/Setting

010ó029
030ó069
070ó129
130ó189

201ó220

Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3

Zoom reset

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -17-

AR1.D

1

Dimmer

000ó255

0–100%

2

Red

000ó255

0–100%

3

Green

000ó255

0–100%

4

Blue

000ó255

0–100%

ARC.2

Channel

Function

Value

Percent/Setting

1

Red

000ó255

0–100%

2

Green

000ó255

0–100%

3

Blue

000ó255

0–100%

4

White

000ó255

0–100%

AR2.D

1

Dimmer

000ó255

0–100%

2

Red

000ó255

0–100%

3

Green

000ó255

0–100%

4

Blue

000ó255

0–100%

5

White

000ó255

0–100%

AR2.S

Channel

Function

Value

Percent/Setting

1

Dimmer

000ó255

0–100%

2

Red

000ó255

0–100%

3

Green

000ó255

0–100%

4

Blue

000ó255

0–100%

5

White

000ó255

0–100%

6

Strobe

000ó255

0–20 Hz

HSV

1

Hue

000ó255

0–100%

2

Saturation

000ó255

0–100%

3

Value

000ó255

0–100%

Operation

DMX Values (Cont.)

Channel Function Value Percent/Setting

Channel Function Value Percent/Setting

Channel Function Value Percent/Setting

-18- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

DMX Values (Cont.)

TR16

1

Dimmer

000ó255

0–100%

000ó255

Fine control (16-bit) (Step Dur ati on if Custom 1–10
in CH. 13 is active)

000ó255

0–100%
(Fade Duration if Custom 1–10 in CH. 13 is active)

4

Fine Red

000ó255

Fine control (16-bit)

5

Green

000ó255

0–100%

6

Fine Green

000ó255

Fine control (16-bit)

7

Blue

000ó255

0–100%

8

Fine Blue

000ó255

Fine control (16-bit)

9

White

000ó255

0–100%

10

Fine White

000ó255

Fine control (16-bit)

000ó010

251ó255

No function

White 11

000ó009
010ó255

No function
0–20 Hz

Channel Function Value Percent/Setting

2 Fine Dimmer

3 Red

Operation

11

12 Strobe

Color Macro + White
Balance

011ó030
031ó050
051ó070
071ó090
091ó110
111ó130
131ó150
151ó170
171ó200
201ó205
206ó210
211ó215
216ó220
221ó225
226ó230
231ó235
236ó240
241ó245
246ó250

R: 100% G: 0–100% B: 0
R: 100%–0 G: 100% B: 0
R: 0 G: 100% B: 0–100%
R: 0 G: 100%–0 B: 100%
R: 0–100% G: 0 B: 100%
R: 100% G: 0 B: 100%–0
R: 100% G: 0–100% B: 0–100%
R: 100%–0 G: 100%–0 B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -19-

TR16

000ó040

231ó255

No function

Custom 10

000ó255

0–100%
(only when using Auto 1–10 in CH. 13)

000ó009

190ó255

Preset dimmer speed from display menu

Nonlinear dimming curve 4 (slowest)

16

Zoom

000ó255

0–100%

000ó200
221ó255

No function
No function

AR2.Z

1

Dimmer

000ó255

0–100%

2

Red

000ó255

0–100%

3

Green

000ó255

0–100%

4

Blue

000ó255

0–100%

5

White

000ó255

0–100%

6

Zoom

000ó255

0–100%

000ó200
221ó255

No function
No function

Operation

DMX Values (Cont.)

Channel Function Value Percent/Setting

(Cont.)

13 Programs

041ó050
051ó060
061ó070
071ó080
081ó090
091ó100
101ó110
111ó120
121ó130
131ó140
141ó150
151ó160
161ó170
171ó180
181ó190
191ó200
201ó210
211ó220
221ó230

Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Custom 8
Custom 9

14 Auto Speed

15 Dimmer Speed

17 Zoom Reset

010ó029
030ó069
070ó129
130ó189

201ó220

Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3

Zoom reset

Channel Function Value Percent/Setting

7 Zoom Reset

201ó220

Zoom reset

-20- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

DMX Values (Cont.)

STD.Y

1

Dimmer

000ó255

0–100%

000ó255

Fine control (16-bit)
(Step Duration if Custom 1–10 in CH. 13 is active)

000ó255

0–100%
(Fade Duration if Custom 1–10 in CH. 13 is active)

4

Fine Red

000ó255

Fine control (16-bit)

5

Green

000ó255

0–100%

6

Fine Green

000ó255

Fine control (16-bit)

7

Blue

000ó255

0–100%

8

Fine Blue

000ó255

Fine control (16-bit)

9

White

000ó255

0–100%

10

Fine White

000ó255

Fine control (16-bit)

000ó010

251ó255

No function

White 11

000ó009
010ó255

No function
0–20 Hz

Channel Function Value Percent/Setting

2 Fine Dimmer

3 Red

Operation

11

12 Strobe

Color Macro + White
Balance

011ó030
031ó050
051ó070
071ó090
091ó110
111ó130
131ó150
151ó170
171ó200
201ó205
206ó210
211ó215
216ó220
221ó225
226ó230
231ó235
236ó240
241ó245
246ó250

R: 100% G: 0–100% B: 0
R: 100%–0 G: 100% B: 0
R: 0 G: 100% B: 0–100%
R: 0 G: 100%–0 B: 100%
R: 0–100% G: 0 B: 100%
R: 100% G: 0 B: 100%–0
R: 100% G: 0–100% B: 0–100%
R: 100%–0 G: 100%–0 B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -21-

STD.Y

000ó040

231ó255

No function

Custom 10

000ó255

0–100%
(only when using Auto 1–10 in CH. 13)

000ó009

190ó255

Preset dimmer speed from display menu

Nonlinear dimming curve 4 (slowest)

16

Zoom

000ó255

0–100%

000ó200
221ó255

No function
No function

Operation

DMX Values (Cont.)

Channel Function Value Percent/Setting

(Cont.)

13 Programs

041ó050
051ó060
061ó070
071ó080
081ó090
091ó100
101ó110
111ó120
121ó130
131ó140
141ó150
151ó160
161ó170
171ó180
181ó190
191ó200
201ó210
211ó220
221ó230

Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Custom 8
Custom 9

14 Auto Speed

15 Dimmer Speed

17 Zoom Reset

010ó029
030ó069
070ó129
130ó189

201ó220

Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3

Zoom reset

-22- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

DMX Values (Cont.)

FULL

1

Dimmer

000ó255

0–100%

000ó255

Fine control (16-bit)
(Step Duration if Custom 1–10 in CH. 21 is active)

000ó255

0–100%
(Fade Duration if Custom 1–10 in CH. 21 is active)

4

Fine Red 1

000ó255

Fine control (16-bit)

5

Green 1

000ó255

0–100%

6

Fine Green 1

000ó255

Fine control (16-bit)

7

Blue 1

000ó255

0–100%

8

Fine Blue 1

000ó255

Fine control (16-bit)

9

White 1

000ó255

0–100%

10

Fine White 1

000ó255

Fine control (16-bit)

11

Red 2

000ó255

0–100%

12

Fine Red 2

000ó255

Fine control (16-bit)

13

Green 2

000ó255

0–100%

14

Fine Green 2

000ó255

Fine control (16-bit)

15

Blue 2

000ó255

0–100%

16

Fine Blue 2

000ó255

Fine control (16-bit)

17

White 2

000ó255

0–100%

18

Fine White 2

000ó255

Fine control (16-bit)

000ó010

251ó255

No function

White 11

000ó009
010ó255

No function
0–20 Hz

Channel Function Value Percent/Setting

2 Fine Dimmer

3 Red 1

Operation

19

Color Macro + White
Balance

011ó030
031ó050
051ó070
071ó090
091ó110
111ó130
131ó150
151ó170
171ó200
201ó205
206ó210
211ó215
216ó220
221ó225
226ó230
231ó235
236ó240
241ó245
246ó250

R: 100% G: 0–100% B: 0
R: 100%–0 G: 100% B: 0
R: 0 G: 100% B: 0–100%
R: 0 G: 100%–0 B: 100%
R: 0–100% G: 0 B: 100%
R: 100% G: 0 B: 100%–0
R: 100% G: 0–100% B: 0–100%
R: 100%–0 G: 100%–0 B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10

20 Strobe

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -23-

FULL

000ó040

231ó255

No function

Custom 10

000ó255

0–100%
(only when using Auto 1–10 in CH. 21)

000ó009

190ó255

Preset dimmer speed from display menu

Nonlinear dimming curve 4 (slowest)

24

Zoom

000ó255

0–100%

000ó200
221ó255

No function
No function

Operation

DMX Values (Cont.)

Channel Function Value Percent/Setting

(Cont.)

21 Programs

041ó050
051ó060
061ó070
071ó080
081ó090
091ó100
101ó110
111ó120
121ó130
131ó140
141ó150
151ó160
161ó170
171ó180
181ó190
191ó200
201ó210
211ó220
221ó230

Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Custom 8
Custom 9

COLORado™ 1-Quad Zoom Tour Pixel Selection for DMX Control

22 Auto Speed

23 Dimmer Speed

25 Zoom Reset

010ó029
030ó069
070ó129
130ó189

201ó220

Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3

Zoom reset

-24- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

DMX Values (Cont.)

C1Q

1

Dimmer

000ó255

0–100%

000ó255

0–100%
(Step Duration if Custom 1–10 in CH. 8 is active)

000ó255

0–100%
(Fade Duration if Custom 1–10 in CH. 8 is active)

4

Blue

000ó255

0–100%

5

White

000ó255

0–100%

000ó010

251ó255

No function

White 11

000ó009
010ó255

No function
0–20 Hz

Channel Function Value Percent/Setting

2 Red

3 Green

Operation

011ó030
031ó050
051ó070
071ó090
091ó110
111ó130
131ó150
151ó170

6

7 Strobe

Color Macro + White
Balance

171ó200
201ó205
206ó210
211ó215
216ó220
221ó225
226ó230
231ó235
236ó240
241ó245
246ó250

R: 100% G: 0–100% B: 0
R: 100%–0 G: 100% B: 0
R: 0 G: 100% B: 0–100%
R: 0 G: 100%–0 B: 100%
R: 0–100% G: 0 B: 100%
R: 100% G: 0 B: 100%–0
R: 100% G: 0–100% B: 0–100%
R: 100%–0 G: 100%–0 B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
White 10

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -25-

C1Q

000ó040

231ó255

No function

Custom 10

000ó255

0–100%
(only when using Auto 1–10 in CH. 8)

000ó009

190ó255

Preset dimmer speed from display menu

Nonlinear dimming curve 4 (slowest)

Operation

DMX Values (Cont.)

Channel Function Value Percent/Setting

(Cont.)

8 Programs

041ó050
051ó060
061ó070
071ó080
081ó090
091ó100
101ó110
111ó120
121ó130
131ó140
141ó150
151ó160
161ó170
171ó180
181ó190
191ó200
201ó210
211ó220
221ó230

Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
Auto 7
Auto 8
Auto 9
Auto 10
Custom 1
Custom 2
Custom 3
Custom 4
Custom 5
Custom 6
Custom 7
Custom 8
Custom 9

9 Auto Speed

10 Dimmer Speed

010ó029
030ó069
070ó129
130ó189

Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3

-26- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

5. TECHNICAL INFORMATION

Product

To maintain optimum perf ormance and minimize w ear, you s ho uld cle an this product fr equent l y.

up reduces light output

erformance and can cause overheating. This can lead to reduced light source life and

7. Gently polish the lens surfaces until they are free of haze and lint.

Technical Information

Maintenance

Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build­p
increased mechanical wear.
To clean your product:

1. Unplug the product from power.

2. Wait until the product is at room temperature.

3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external vents.

4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl
alcohol.

5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.

6. Wipe any dirt or grime to the outside edges of the lens surface.

Always dry the external surfaces thoroughly and carefully after cleaning them.

Colorado™ 1-Quad Zoom Tour User Manual Rev. 1 -27-

Dimensions and

13.14 in (334 mm)

9.25 in (235 mm)

7.48 in (190 mm)

14.8 lb (6.7 kg)

Note: Dimensions in inches rounded to the nearest decimal digit.

Power

Switching (internal)

100–240 VAC, 50/60 Hz

Auto-ranging

Consumption

129 W

124 W

Current

1.08 A

0.57 A

Power linking current

(products)

13.6 A (12 products)

13.6 A (23 products)

Power input connector

Neutrik® powerCON® A

Neutrik® powerCON® A

Power output connector

Neutrik® powerCON® B

Neutrik® powerCON® B

Power cord plug

Edison (U.S.)

Local plug

Light Source

Type

Power

Lifespan

LED

15 W

50,000 hours

Color

Quantity

Current

Quad-color RGBW

7

1,000 mA

Photo Optic

Illuminance @ 5 m (16°)

3,950 lux

Illuminance @ 5 m (48°)

330 lux

Beam angle

7° to 29°

Field/Zoom angle

16° to 48°

Thermal

113 °F (45 °C)

Convection

DMX

3- and 5-pin XLR

Sockets

3, 4, 5, 6, 7, 10, 12, 17 or 25

Ordering

Colorado™ 1-Quad Zoom

Tour

01030456

781462208080

Technical Information

6. TECHNICAL SPECIFICATIONS

Weight

Length Width Height Weight

Power Supply Type Range Voltage Selection

Parameter 120 VAC, 60 Hz 230 VAC, 50 Hz

Power I/O U.S./Canada Worldwide

Parameter Standard Optics

Max. External Temperature Cooling System

I/O Connectors Connector Type Channel Range

Product Name Item Code UPC Number

-28- Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

Returns

You must send the product prepaid, in the original box, and with the original packing and

will refuse any product returned

without an RMA number.

DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed
label.

Once you have rec ei ved t he RMA number, include the follo win g inf ormation on a piece of pa per

y. Any shipping damage resulting from inadequate

recommended.

Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).

C

WORLD HEADQUARTERS - Chauvet

General Information

Toll free:[phone]

Technical Support

World Wide Web www.chauvetlighting.com

UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.

General Information

Fax: [phone]

Technical Support

MEXICO - Chauvet Mexico

General Information

Voice: [phone]

Technical Support

Outside the U.S., United Ki ngdom, Ireland, or Mexico, contact the deal er of record. Follo w their
instructions to request support or to return a product. Visit our website for contact details.

accessories. Chauvet will not issue call tags.
Call Chauvet and reques t a Return Merchandise Authorizat ion (RMA) number before shipping
the product. Be prepared to provide th e m odel num ber, s erial num ber, and a br ief desc ription of
the cause(s) for the return.
Clearly label the package with an RMA number. Chauvet

inside the box:

• Your name

• Your address

• Your phone number

• The RMA number

• A brief description of the problem(s)

Be sure to pack the product properl
packaging will be the customer’s responsibility. FedEx packing or double-boxing is

ONTACT

US

Address:5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]

Address:Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: [phone]

Address:Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000

Voice: [phone] (Press 4)
Fax: [phone]
Email: [e-mail]

Email: [e-mail]

World Wide Web www.chauvetlighting.co.uk

Email: [e-mail]

World Wide Web www.chauvet.com.mx

-29-