Power Linking ......................................................................................................................................... 7
Contact Us .........................................................................................................................17
Page 2 of 17 Beamer 8 User M anual Rev. 1
Page 3
1.BEFORE YOU BEGIN
What Is
Included
•Warranty Card
Unpacking
Instructions
check the container to make sure all the
If the box or the contents (the product and included accessories) appear damaged from
Failure to report damage to the carrier immediately may invalidate your claim. In
For other issues, such as missing components or parts, damage not related to shipping,
Text
Convention
Meaning
1—512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Symbol
Meaning
Critical installation, configuration, or operation information. Not
damage to the product, or cause harm to the operator.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all
respects. However, Chauvet assumes no responsibility and specifically disclaims any
Claims
Conventions
•Beamer 8
•Power Cord
Carefully unpack the product immediately and
parts are in the package and are in good condition.
shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet.
addition, keep the box and contents for inspection.
or concealed damage, file a claim with Chauvet within 7 days of delivery.
Electrical warning. Not following these instructions may cause
electrical damage to the product, accessories, or the user.
•Quick Reference Guide
following these instructions may make the product not work, cause
Important installation or configuration information. The product
may not function correctly if this information is not used.
Useful information.
and all liability to any party for any loss, damage or disruption caused by any errors or
omissions in this document, whether such errors or omissions result from negligence,
accident or any other cause. Chauvet reserves the right to revise the content of this
document without any obligation to notify any person or company of such revision,
however, Chauvet has no obligation to make, and does not commit to make, any such
revisions. Download the latest version from www.chauvetlighting.com.
The works of authorship contained in this manual, including, but not limited to, all design,
text and images are owned by Chauvet.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo and Beamer 8 are registered trademarks or trademarks
of Chauvet & Sons LLC. (d/b/a Chauvet and Chauvet Lighting) in the United States
and other countries. Other company and product names and logos referred to herein
may be trademarks of their respective companies.
Beamer 8 User Manual Rev. 1 Page 3 of 17
Page 4
Product at a
Glance
x
P
x
P
P
P
P
x
P
Safety Notes
Use on Dimmer
Outdoor Use
Sound-Active
DMX
Master/Slave
Please read the following Safety Notes carefully before working with the product. The
Notes include important safe ty infor mat ion abou t installation, usage, and maintenance.
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•Always disconnect the product from the power source before cleaning or replacing
the fuse.
•Avoid direct eye exposure to the light source while the product is on.
•Make sure the power cord is not crimped or damaged.
•Never disconnect the product from power cord by pulling or tugging on the cord.
•If mounting the product overhead, always secure to a fastening device using a
safety cable.
•Make sure there are no flammable materials close to the product when operating.
•Do not touch the product’s housing when operating because it may be very hot.
•Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
•The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
•Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
•Be sure that no ventilation slots on the product’s housing ar e blocked.
•Never connect the product to a dimmer.
•Make sure to replace the fuse with another of the same type and rating.
•Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
•The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
•In the event of a serious operating problem, stop using the product immediately.
•Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assis tance
center.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User-Serviceable
Page 4 of 17 Beamer 8 User M anual Rev. 1
Keep this User Manual for future use. If you sell the product to someone else, b e
sure that they also receive this document.
Page 5
2.INTRODUCTION
Product Overview
Microphone
Power Out
Safety Loop
DMX In/Out
Menu Buttons
Power In
Back Panel View
Front View Zones
IR Sensor
Sound Sensitivity
Adjustment
Fuse Holder
Display
Beamer 8 User Manual Rev. 1 Page 5 of 17
Page 6
Product Dimensions
10.55 in
268 mm
7.24 in
184 mm
22.24 in
565 mm
3.35 in
85 mm
23.82 in
605 mm
Page 6 of 17 Beamer 8 User M anual Rev. 1
Page 7
AC Power
ranging power supply and it can work with an input voltage
power requirements
circuit breaker, power outlet, and wiring), use the current value listed on the label
’s specifications chart. The
’s average current draw under normal
to a rheostat (variable resistor) or dimmer circuit, even
Fuse
1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
4. Insert the fuse holder back in place and reconnect power.
outlet located in the back of the
Power Linking
in other markets, you must consult with the
distributor as power linking connectors and requirements may
Spare fuse holder
(inside safety cap)
Installed fuse
(held by plastic clip)
Safety cap
1st Product
2nd Product
3rd Product
Additional
Products
3.SETUP
Replacement
The Beamer 8 has an autorange of 100 to 240 VAC, 50/60 Hz. To determine the product’s
(
affixed to the product’s back panel, or refer to the product
listed current rating indicates the product
conditions.
•Always connect the product to a protected circuit (circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk
of electrocution or fire.
•To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
2. Pry the fuse holder out of the housing.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same
type and rating.
Disconnect the product from the power outlet before replacing the fuse.
Power Linking
Diagram
The product provides power linking via the Edison
product. Please see the diagram below for further explanation.
You can power link up to 13 Beamer 8 products on 120 VAC or up to 24 Beamer 8
products on 230 VAC.
The power linking diagram corresponds to the North American version of the
product ONLY! If using the product
local Chauvet
differ in your country or region.
Beamer 8 User Manual Rev. 1 Page 7 of 17
Page 8
Mounting
, read and follow the safety recommendations indicated in
may be mounted in any position; however, make sure adequate
• When aiming the products, youmay use the bracket adjustment knob(s)on the bracket.
Loosen the kn ob(s), a djust to the desi re d ang le, and th en ti ght en t he kno b(s) by t urni ng
beam head is mounted on a multidirectional pivot, and can be manually
adjusted to most positions.
Mounting Clamp
Chauvet)
Bracket
Before mounting the product
the Safety Notes.
Orientation
Rigging
Mounting Diagram
The Beamer 8
ventilation is provided around the produc t .
•Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
•Make sure that the structure onto which you are mounting the product can support
the product’s weight. See the Technical Specificationsfor weight information.
•When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
•When rigging the product onto a truss, use a mounting clamp of appropriate weight
capacity.
•When power linking multiple products, mount the products close enough for power
linking cables to reach.
•The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Safety Cable
(such as CH-05 from
Chauvet)
Bracket
Adjustment
Knob
(such as the CLP-15N from
Mounting
clockwise. D o not use tools for thi s step, as it may caus e damage.
•Each LED
Page 8 of 17 Beamer 8 User M anual Rev. 1
Page 9
Control Panel
Operation
Button
Function
Press to find an operation mode or to back out of the current menu
option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Menu Map
Main Level
Programming Levels
Description
2-Ch
d__1–d511
2-channel DMX mode
16Ch
d__1–d497
16-channel DMX mode
C--
C__1–C__3
Static colors
P--
(automatic)
S--
S._01–S._99
Snd
(sound-active)
on
oFF
When selecting a starting DMX address, always consider the number of DMX channels
DMX mode, which defines the
If you are not familiar with the DMX protocol, download the DMX Primer from
4. Press <ENTER>.
DMX Linking
works with a DMX controller. Information about DMX is in the
socket on the product.
4.OPERATION
To access the control panel functions, use the four buttons located on each side of the
display. Please refer to the Product Overview to see the button locations on the c ontrol
panel.
<MENU>
DMX Personality
and Starting
Address
Configuration
(DMX)
P__1–P__9
Snd1–Snd9
SEt
Automatic programs, 1–9
Program speed
Sound-Active programs
IR function on or off
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Beamer 8 uses up to 16 DMX channels in a 16Ch
highest configurable address to 497.
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 2-Ch or 16Ch shows on the display.
2. Press <ENTER> and d 1–511 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
The Beamer 8
CHAUVET DMX Primer, which is available from the Chauvet website
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
Beamer 8 User Manual Rev. 1 Page 9 of 17
Page 10
DMX Channel Assignments and V alues
CH
Channel
Function
Value
Percent/Setting
Static Color
000
Blackout
Beam Heads 1
001 ó 085
Red 0–100%
086 ó 170
Green 0–100%
171 ó 255
Blue 0–100%
9
Beam Dimmer
000 ó 255
100–0%
000 ó 080
Speed 0–100%
081 ó 160
Speed 100–0%
161 ó 240
Strobe speed 0–100%
241 ó 255
Strobe sound mode
11
Strobe 1
000 ó 255
0–100%
12
Strobe 2
000 ó 255
0–100%
13
Strobe 3
000 ó 255
0–100%
14
Strobe 4
000 ó 255
0–100%
000 ó 005
Blackout
006 ó 089
Beams only
090 ó 173
Strobe Only
174 ó 255
Beams and Strobe
000 ó 250
Auto program Speed 0–100%
251 ó 255
Sound Mode
CH
Channel
Function
Value
Percent/Setting
000 ó 005
Blackout
006 ó 089
Beams only
090 ó 173
Strobe Only
174 ó 255
Beams and Strobe
000 ó 250
Auto program Speed 0–100%
251 ó 255
Sound Mode
Front View Zones
IR Sensor
16
1–8
10 Pulse Effect Speed
15 Auto Programs
16 AllProgram Speed
–8
2-
1 Auto Programs
2 All Program Speed
Zones of DMX Control for Beamer 8
Page 10 of 17 Beamer 8 User M anual Rev. 1
Page 11
Configuration
(Standalone)
4. Press <ENTER>.
Automatic
4. Press <ENTER>.
Auto-Program
3. Press <ENTER>. The product will return to the last selected mode.
Sound-Active
3. Press <ENTER>.
Program
Effect
1
All – Beams and Strobes
2
All – Beams and Strobes
3
All – Beams and Strobes
4
Beams Only
5
Beams Only
6
Beams Only
7
Strobes Only
8
Strobes Only
9
Strobes Only
Set the product in one of the standalone modes to control without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Static Programs
Programs
Speed
Mode
Sound
Sensitivity
Auto and Sound
Modes
To run the Beamer 8 in static mode, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select a static program (C 1–3).
To run the Beamer 8 in automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select an auto program (P 1–9).
To change the auto-program speed on the Beamer 8, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> and <DOWN> to increase or decrease the program speed (S. 1– 99).
To run the Beamer 8 in sound-active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Use <UP> and <DOWN> to select a sound program (Snd1–9).
To change the sound sensitivity on the Beamer 8, turn the sound sensitivity adjustment
knob up until the product responds to the beat of the music.
The product will only respond to low frequencies of music (bass and drums).
Beamer 8 User Manual Rev. 1 Page 11 of 17
Page 12
IRC-6 Infrared
Remote
Control
4.Press <ENTER>.
IRC-6 Operation
6 will not respond to any inputs when Black Out is activated. If the
. You
The Beamer 8 is compatible with the IRC-6 infrared remote control from Chauvet. To
activate IR mode, follow the instructions below:
1.Press <MENU> repeatedly until SEt shows on the display.
2.Press <ENTER> to accept.
3.Press <UP> or <DOWN> to select on or oFF.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1.Press <AUTO> on the IRC-6.
2.Press any number between <1>~<9> to choose between the different auto
programs.
To adjust the speed of the automatic program:
1.Press <SPEED> on the IRC-6.
2.Press <+> or <–> to increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1.Press <SOUND> on the IRC-6.
2.Press any number between <1>~<9> to choose between the different sound
programs.
Manual Color Control
To manually control the RGB:
•Press <R> (red), <G> (green), or <B> (blue) to choose your color.
Miscellaneous Operation
To black out the lights:
Press <BLACK OUT> on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-
remote does not respond when a button is pressed, try pressing <BLACK OUT>
may have inadvertently activated Black Out.
Page 12 of 17 Beamer 8 User M anual Rev. 1
Page 13
Master/Slave
product (the “master”) to control the
products (the “slaves”) without the need of a DMX
2. Make the master product the first product in the DMX daisy chain.
The Master/Slave mode allows a single Beamer 8
Mode
actions of one or more Beamer 8
controller. The master product will be set to operate in either Stand-Alone mode or with
the IRC-6, while the slave products will be set to operate in Slave mode. Once set and
connected, the slave products will operate in unison with the master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until 2-Ch, or 16Ch shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4. Connect the DMX input of the first slave product to the DMX output of the master
product.
5. Connect the DMX input of the subsequent slave products to the DMX output of the
previous slave product.
6. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in either Stand-Alone mode or with the IRC-6.
•Configure all the slave products before connecting the master to the daisy
chain.
•Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the
master.
•Do not connect more than 31 slaves to the master.
Beamer 8 User Manual Rev. 1 Page 13 of 17
Page 14
5.MAINTENANCE
Product
performance and can cause overheating. This can
mechanical wear. To maintain optimum
s at least twice a month.
vironmental conditions could be contributing
7.Gently polish the tran spar ent s ur fac es until they are free of haze and lint.
Dust build-up reduces light output
Maintenance
lead to reduction of the light source’s life and/or
performance and minimize wear, clean your lighting product
However, be aware that usage and en
factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1.Unplug the product from power.
2.Wait until the product is at room temperature.
3.Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
4.Clean all transparent surfaces with a mild soap solution, ammonia-free glass
5.Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6.Softly drag any dirt or grime to the outside of the transparent surfa ce.
Always dry the transparent surfaces carefully after cleaning them.
the external surface/vents.
cleaner, or isopropyl alcohol.
Page 14 of 17 Beamer 8 User M anual Rev. 1
Page 15
6.TECHNICAL SPECIFICATIONS
Dimensions and
Length
Width
Height
Weight
23.8 in (605 mm)
7.2 in (184 mm)
10.5 in (268 mm)
6.6 lb (3.0 kg)
Note
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 VAC, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
38 W
37 W
Operating Current
0.6 A
0.3 A
Power linking current
(products)
Fuse
T 1.6 A, 250 V
T 1.6 A, 250 V
Power I/O
U.S./Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (U.S.)
Local plug
Light Source
Type
Power
Lifespan
LED (Beam)
6.9 W
50,000 hours
LED (Strobe)
1 W
50,000 hours
Color
Quantity
Current
RGB 8 2 A
White
4
281 mA
Photometrics
Parameter
Value
Strobe Rate
0 to 20 Hz
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Convection
DMX
I/O Connectors
Channel Range
3-pin XLR
2 or 16
Ordering
Product Name
Item Code
UPC Number
Beamer 8
10051128
781462214760
Weight
: Dimensions in inches rounded to the nearest decimal digit.
8 A (13 products) 8 A (24 products)
Beamer 8 User Manual Rev. 1 Page 15 of 17
Page 16
R
ETURNS
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your
distributor of record and follow their instructions on how to return Chauvet
Call the corresponding Chauvet Technical Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product. Be prepared to
description of the cause for the
Send the merchandise prepaid, in its original box, and with its original packing and
Clearly label the package with the RMA number. Chauvet will refuse any product
Write the RMA number on a properly affixed label. DO NOT write the RMA number
Before sending the product, clearly write the following information on a piece of paper
Be sure to pack the product properly. Any shipping damage resulting from inadequate
boxing are
Chauvet reserves the right to use its own discretion to repair or replace returned
In case you need to get support or return a product:
•If you are located in the U.S., contact Chauvet World Headquarters.
•If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
•If you are located in Mexico, contact Chauvet Mexico.
•If you are located in Benelux, contact Chauvet Europe BVBA.
•If you are located in any other country, DO NOT contact Chauvet. Instead, contact
your local distributor. See www.chauvetlighting.com
UK, Ireland, Mexico, or Benelux.
products to them. Visit our website www.chauvetlighting.com for contact details.
provide the model number, serial number, and a brief
return.
accessories. Chauvet will not issue call tags.
returned without an RMA number.
directly on the box.
and place it inside the box:
•Your name
•Your address
•Your phone number
•RMA number
•A brief description of the problem
for distributors outside the U.S.,
packaging will be your responsibility. FedEx packing or doublerecommended.
product(s).
Page 16 of 17 Beamer 8 User M anual Rev. 1
Page 17
C
USA WORLD HEADQUARTERS
General Information – Chauvet
Technical Support
www.chauvetlighting.com
EUROPE
General Information - Chauvet Euro pe BVBA
Technical Support
General Information - Chauvet Europe Ltd.
Technical Support
MEXICO
General Information - Chauvet Mexico
Voice: +52 (728) 285-5000
Technical Support
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of
website for contact details.