Page 1
User Manual
Page 2
ÉPIX™ Drive 640 User Manual
Edition
The ÉPIX™ Drive 640 User Manual Rev. 9 covers the description, safety
.
User Manual
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a
CHAUVET® or Chauvet). The CHAUVET® logo in its entirety including
the CHAUVET name and the dotted triangle, and all other trademarks in
this manual pertaining to services, products, or marketing statements
) are owned or licensed by CHAUVET®.
product names, logos, brands, company names, and other
trademarks featured or referred to within this document are the property of
Copyright
CHAUVET® owns the content of this user manual in its entirety, including
Manual
CHAUVET® authorizes its customers to download and print this manual
® expressly
se without written consent
Intended
Any person installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as
Disclaimer
CHAUVET® believes that the information contained in this manual is
accurate in all respects. However, CHAUVET® assumes no responsibility
the
right to revise this document and to make changes from time to time in the
company of such revision or changes. This does not constitute in any way a
such changes. CHAUVET® may
issue a revision of this manual or a new edition of it to incorporate such
Document
The ÉPIX™ Drive 640 User Manual Rev. 9 supersedes all previous
Author
Date
Editor
Date
Notes
Notice
Usage
Audience
precautions, installation, and maintenance of the ÉPIX™ Drive 640
CHAUVET® released this edition of the ÉPIX™ Drive 640
in April 2012.
(example: It’s Green Thinking™
Any other
their respective trademark holders.
but not limited to pictures, logos, trademarks, and resources.
© Copyright 2012 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
for professional information purposes only. CHAUVET
prohibits the usage, copy, storage, distribution, modification, or printing of
this manual or its content for any other purpo
from CHAUVET®.
this manual, before installing, operating, or maintaining this product.
for any error or omissions in this document. CHAUVET® reserves
content hereof without obligation of CHAUVET® to notify any person or
commitment by CHAUVET® to make
changes.
Revision
versions of this manual. Discard any older versions of this manual you may
have, whether in printed or electronic format, and replace with this version.
D. Couppe 4/20/12 S. Graham 4/20/12
Page 2 of 14
Page 3
ÉPIX™ Drive 640 User Manual
Unpacking
Immediately upon receiving this product, carefully unpack and check the
in the
are in good
Claims
If the container or the material inside the container (the product and
signs of
, not
in a timely manner may
the container and all the packing
within
section in this manual for addresses and phone
Icon
Expected LED
LEDs gradually decline in brightness over time, mostly because of heat.
than in
LEDs at
Under
normal conditions, this lifespan can be 40,000 to 50,000 hours. If
temperature by
Instructions
Indications
container. Make sure you have received all the parts indicated
What Is Included section of this manual and that all the parts
condition.
included accessories) appear damaged from shipping, or show
mishandling, notify the carrier immediately upon receipt
CHAUVET®. Failure to notify the carrier
invalidate your claim. In addition, keep
material for inspection.
For other issues such as missing components or parts, damage not related
to shipping, or concealed damage, file a claim with CHAUVET®
seven (7) days of receiving the merchandise.
Refer to the Contact Us
numbers.
Icon This icon indicates . . .
Critical installation, configuration, or operation information.
Failure to comply with this information may render the product
partially or completely inoperative, damage third-party
equipment, or cause harm to the user.
Important installation or configuration information. Failure to
comply with this information may prevent the product from
functioning correctly.
Useful information.
Lifespan
Packaged in clusters, LEDs exhibit higher operating temperatures
ideal, single-LED conditions. For this reason, using clustered
their fullest intensity significantly reduces the LEDs’ lifespan.
extending this lifespan is vital, lower the operating
improving the ventilation around the product and reducing the ambient
temperature to a optimal operating range. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.
Page 3 of 14
Page 4
ÉPIX™ Drive 640 User Manual
Safety
Read all the following Safety Notes before working with this product.
include important information about the installation, usage,
Personal
because it may be
Mounting
and
• This product is for indoor use only! To prevent risk of fire or shock, do
Power and
Operation
• Do not operate this product if you see damage on the housing, I/O
These notes
Notes
Safety
Rigging
Wiring
and maintenance of this product.
There are no user-serviceable parts in this product. Any reference to
servicing in this User Manual applies only to properly certified
CHAUVET® technicians. Do not open the housing or attempt any
repairs unless you are certified by CHAUVET®.
Please refer to all applicable local codes and regulations for proper
installation of this product.
• Always disconnect this product from its power source before servicing.
• Always connect this product to a grounded circuit to avoid the risk of
electrocution.
• Do not touch this product’s housing during operation
very hot.
not expose this product to rain or moisture.
• Make sure there are no flammable materials close to this product while
it is operating.
• When hanging this product, always secure to a fastening device using a
safety chain/cable (not included).
• Always make sure you are connecting this product to the proper
voltage, as per the Technical Specifications in this manual or on the
product’s specification label.
• Never connect this product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power
cable.
ports, or cables. Have the damaged parts replaced by an authorized
technician at once.
• Do not cover the ventilation slots when operating to avoid internal
overheating.
• The maximum ambient temperature is 104° F (40° C). Do not operate
this product at a higher temperature.
• In case of a serious operating problem, stop using this product
immediately!
In the unlikely event that your CHAUVET® product may require service,
contact CHAUVET® Technical Support.
Page 4 of 14
Page 5
What Is
• One ÉPIX™ Drive 640
Features
Controllers
• One NEUTRIK® powerCON® to Edison Plug Input Power Cord
Included
• One Warranty Card
• Controlled via the ArKaos Kling-Net protocol which provides fast
and easy assignment and control
• A video/pixel mapping system that doesn’t require years of
experience or technical know-how to design, set-up, or operate
• Does NOT require piles of processing, driver, and signal distribution
equipment to create large-scale displays
• To be used with ÉPIX™ strip
• Utilizes NEUTRIK® powerCON® in and out connections for power
and RJ45 for ArKaos Kling-Net protocol communication
• Housing Material: Stainless Steel
• ArKaos MediaMaster™ software (required)
ÉPIX™ Drive 640 User Manual
Page 5 of 14
Page 6
ÉPIX™ Drive 640 User Manual
Product
The ÉPIX™ Drive 640 is the power supply for the ÉPIX™ Strip.
tiple numbers of
Product Overview
Rear View
Front View
Top View
Signal
Input/Output
Power Output
Mounting Points
RJ45 Data/Power
Output
Power Input
Description
The ÉPIX™ Drive 640 consists of stainless steel construction. You may
combine other ÉPIX™ Series units to create mul
configurations.
The ÉPIX™ Drive 640 is controlled using a computer (Mac or PC) with
ArKaos MediaMaster™ software installed.
ArKaos MediaMaster™ software running on a PC or Mac is required
to use this product.
Page 6 of 14
Page 7
Product Dimensions
ÉPIX™ Drive 640 User Manual
Page 7 of 14
Page 8
ÉPIX™ Drive 640 User Manual
Input Power
The ÉPIX™ Drive 640 has swichable power supply that works with an
, refer to the
label affixed to the product or the specifications in this
Power Linking
The ÉPIX™ Drive 640 supports power linking. You can power link up
This product comes with a power input cord. This product does not come
is available as
Drive Power Linking
Diagram
input voltage of 120VAC, 60 Hz or 230 VAC 50/60 Hz.
Make sure that you are connecting this product to the proper voltage. To
determine the power requirements for the ÉPIX™ Drive 640
specification
manual.
Never connect this product to a rheostat (variable resistor) or
dimmer circuit, even if the rheostat or dimmer channel serves only as
a 0% to 100% switch.
to three (3) ÉPIX™ Drive 640’s at 120 VAC or six (6) at 230 VAC.
with a power linking cord; however, a power linking cord
an option.
You can only link up to three (3) ÉPIX™ Drive 640 products at 120
VAC or six (6) at 230 VAC! Refer to the Technical Specifications
section of this manual for further information.
Page 8 of 14
Page 9
ÉPIX™ Drive 640 User Manual
Data Linking
The ÉPIX™ Drive 640 works connected through a network switch (or
Data
Connection
The ÉPIX™ Drive 640 uses an RJ45 data connection to link all data ports.
ArKaos Kling-Net
Connection
Switch
Computer
ÉPIX™ Strip Connection
Input
Output
crossover cable) to a computer (Mac or PC) with ArKaos MediaMaster™
software installed.
The following diagrams illustrate how to assemble the data connections.
(running ArKaos
MediaMaster™
software)
For smooth-running operation, ArKaos Kling-Net requires a gigabit (1000
Mbps) Ethernet card and network switch.
NEVER REVERSE THE INPUT AND OUTPUT CONNECTIONS! DOING SO
WILL DESTROY THE INTERNAL CIRCUITS OF THE PRODUCT!
Page 9 of 14
Page 10
ÉPIX™ Drive 640 User Manual
Mounting
Before mounting this product, read the Safety Notes in this User Manual.
Orientation
Always mount this product in a safe position and make sure there is
Rigging
The ÉPIX™ Drive 640 has six (6) mounting points with 10 mm holes.
when
When selecting an installation location, consider easy access to this
Procedure
The ÉPIX™ Drive 640 has four (4) mounting points (one on each corner)
this product
nts centered on each
supply your
are capable of supporting the
Product
adequate room for ventilation, configuration, and maintenance.
CHAUVET® recommends using the following general guidelines
mounting this product:
•
product for operation, programming adjustments, and routine
maintenance.
• Make sure to mount this product away from any flammable material
as indicated in the Safety Notes section.
• Never mount in places where rain, high humidity, extreme
temperature changes, or restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can
support the product’s weight. Refer to the Technical Specifications
section for the weight-bearing requirements of this product.
with 10 mm holes to which you can install screws and mount
directly to almost any flat surface in any orientation.
The ÉPIX™ Drive 640 also has two (2) mounting poi
end of the product to install clamps for hanging. You must
own clamps and make sure the clamps
weight of this product.
Mounting
Diagram
Page 10 of 14
Page 11
Programming
Refer to the ArKaos MediaMaster™ software manual for detailed
instructions on installing and programming this product.
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean
at least twice a month. Dust build up reduces
light output performance and can cause overheating. This can lead to
Gently polish
this product frequently. Usage and environment are contributing factors in
determining the cleaning frequency.
As a rule, clean this product
reduced light source life and increased mechanical wear.
To clean your product:
• Unplug the product from power.
• Wait until the product has cooled.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external vents and accessible internal components.
• Clean all external surfaces with a mild solution of non-ammonia glass
cleaner or isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens
cleaning tissue.
• Wipe any dirt or grime to the outside edge of the surface.
the surfaces with the lint-free cotton cloth or lens cleaning tissue until
they are free of haze and lint.
Always dry the external surfaces carefully after cleaning them.
ÉPIX™ Drive 640 User Manual
Page 11 of 14
Page 12
ÉPIX™ Drive 640 User Manual
Returns
You must send the merchandise prepaid, in the original box, and with the
and request a Return Merchandise Authorization
(RMA) number before shipping the product. Be prepared to provide the
model number, serial number, and a brief description of the cause for the
Once you have received the RMA number, include the following
Procedure
original packing and accessories. CHAUVET® will not issue call tags.
Call CHAUVET®
return.
Clearly label the package with an RMA number. CHAUVET® will refuse
any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on
a properly affixed label.
information on a piece of paper inside the box:
• Your name
• Your address
• Your phone number
• The RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from
inadequate packaging will be the customer’s responsibility. FedEx
packing or double-boxing are recommended.
CHAUVET® reserves the right to use its own discretion to repair or
replace returned product(s).
Page 12 of 14
Page 13
Technical Specifications
Dimensions and
Weight
Length
Width
Height
Weight
10.0 in (253 mm)
12.2 in (310 mm)
3.4 in (86 mm)
6.3 lbs (2.9 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Electrical
Power Supply Type
Range
Voltage Selection
ÉPIX ™ Drive 640
120/230 V, 50/60 Hz
Switchable
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
310 W
299 W
Operating
4.12 A
2.16 A
Power linking products
3 products
6 products
Fuse
T 3.15 A, 250 V
T 3.15 A, 250 V
Power I/O
US/Worldwide
Europe
Power input connector
NEUTRIK® powerCON®
A
NEUTRIK® powerCON®
A
Power output connector
NEUTRIK® powerCON®
B
NEUTRIK® powerCON®
B
Power cord plug
Edison (US)
Local plug
Thermal
Max. External
Temperature
Cooling System
104° F (40° C)
Convection
ArKaos Kling-Net
I/O Connectors
Channel Range
MediaMaster™ software
Ordering
Product Name
Item Code
UPC Number
ÉPIX ™ Drive 640
17090454
781462208066
ArKaos MediaMaster™
software
99080464
781462208165
ÉPIX™ Drive 640 User Manual
RJ45 Determined per ArKaos
Page 13 of 14
Page 14
ÉPIX™ Drive 640 User Manual
Contact Us
World Headquarters
United Kingdom and Ireland
Fa x: +44 (0)1773 511110
Technical Support
Technical Support
World Wide Web
www.chauvetpro.com
World Wide Web
www.chauvetlighting.co.uk
Outside the U.S., United Kingdom, or Ireland, contact your distributor of
record. Follow their instructions to request support or to return a product.
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: (954) 929-1115
Fa x: (954) 929-5560
Toll free: (800) 762-1084
Voice: (954) 929-1115 (Press 4)
Fa x: (954) 756-8015
Email: tech@chauvetlighting.com
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Email: uktech@chauvetlighting.com
Visit our Web site for contact details.
ÉPIX™ Drive 640 User Manual – Rev. 9
© Copyright 2012 CHAUVET®
All rights reserved.
Printed in the P. R. C.
Page 14 of 14
Loading...