How it Works
Chauvet
Loading...
450 IRC
User Manual
27 pgs1.21 Mb0
Table of contents
Loading...

Chauvet 450 IRC User Manual

Download
Page 1
User Manual
Page 2
TABLE OF CONTENTS
1. Before You Begin ............................................................................................................. 4
Claims ..................................................................................................................................................... 4
2. Introduction ...................................................................................................................... 6
3. Setup ................................................................................................................................. 8
Power Linking ......................................................................................................................................... 8
Orientation .............................................................................................................................................. 9
Rigging ................................................................................................................................................... 9
4. Operation ........................................................................................................................ 10
Starting Address ................................................................................................................................... 11
DMX Personalities ................................................................................................................................ 11
29CH .................................................................................................................................................... 12
Intimidator Wash Zoom 450 IRC Zones of Control ............................................................................... 12
29CH (cont.) ......................................................................................................................................... 13
29CH (cont.) ......................................................................................................................................... 14
29CH (cont.) ......................................................................................................................................... 15
14CH .................................................................................................................................................... 16
14CH (cont.) ......................................................................................................................................... 17
14CH (cont.) ......................................................................................................................................... 18
Automatic Mode .................................................................................................................................... 19
Sound-Active Mode .............................................................................................................................. 19
Sound Sensitivity .................................................................................................................................. 19
Pan/Tilt Orientation ............................................................................................................................... 20
Pan/Tilt Angle Range ............................................................................................................................ 20
Pan/Tilt Speed ...................................................................................................................................... 20
Dimmer Curve ...................................................................................................................................... 20
Dimmer Speed ...................................................................................................................................... 20
Color Balance ....................................................................................................................................... 21
Display Timeout .................................................................................................................................... 21
Display Orientation ............................................................................................................................... 21
Fans ...................................................................................................................................................... 21
Reset .................................................................................................................................................... 21
Load Factory Defaults ........................................................................................................................... 21
System Info ........................................................................................................................................... 21
Page 2 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 3
IRC-6 Operation.................................................................................................................................... 22
5. Maintenance ................................................................................................................... 24
6. Technical Specifications ............................................................................................... 25
Returns................................................................................................................................ 26
Contact Us .......................................................................................................................... 27
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 3 of 27
Page 4
What Is
Included
Hardware
• Power Cord
Unpacking
Instructions
Carefully unpack the product immediately and check the container to make sure all the
If the box or the contents (the product and included accessories) appear damaged from
Failure to report damage to the carrier immediately may invalidate your claim. In
For other issues, such as missing components or parts, damage not related to shipping,
Text
Convention
Meaning
1—512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected
Symbols
Symbol
Meaning
Critical installation, configuration, or operation information. Not
damage to the product, or cause harm to the operator.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision,
ever, Chauvet has no obligation to make, and does not commit to make, any such
, and Intimidator Wash
are registered trademarks or trademarks of Chauvet & Sons Inc. (d/b/a Chauvet
Other company and
s of their respective

1. BEFORE YOU BEGIN

Claims
Conventions
• Intimidator Wash Zoom 450 IRC
• Hanging Bracket with Mounting
parts are in the package and are in good condition.
shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet.
addition, keep the box and contents for inspection.
or concealed damage, file a claim with Chauvet within 7 days of delivery.
following these instructions may make the product not work, cause
• Warranty Card
• Quick Reference Guide
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
how revisions. Download the latest version from www.chauvetlighting.com.
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
© Copyright 2019 Chauvet & Sons, Inc. All rights reserved.
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, Intimidator Wash Zoom 450 IRC
Zoom and Chauvet Lighting) in the United States and other countries. product names and logos referred to herein may be trademark companies.
Page 4 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 5
Product at a
Safety Notes
Glance
Use on Dimmer
Outdoor Use
Sound-Active
DMX
Master/Slave
Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage, and maintenance.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing
the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User-Serviceable
Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document.
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 5 of 27
Page 6

Product Overview

Power Out
IR Sensor
Yoke
LCD
Display
Control
Buttons
DMX In/Out
Power In
Fuse-Holder
Indicator
Light

2. INTRODUCTION

Front View
Back Panel View
Page 6 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 7

Product Dimensions

10.91 in 277 mm
363 mm
Front View
Side View
7.84 in
199 mm
9.09 in
231 mm
3.27 in 83 mm
7.09 in
180 mm
6.81 in
173 mm
7.64 in
194 mm
14.29 in
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 7 of 27
Page 8
AC Power
ranging power supply and it can work
circuit breaker, power outlet, and wiring), use the current value
’s average current
unplugging it.
to a rheostat (variable resistor) or dimmer circuit, even
Fuse
1. Disconnect the product from power.
5. Screw the fuse holder cap back in place and reconnect power.
Power Linking
Power Linking
products on 120 VAC
North American version of the product ONLY! If using the product in other markets, you must consult with the local Chauvet distributor as power linking connectors and requirements may differ in your country or region.
1st Product
2nd Product
3rd Product
Other products

3. SETUP

Replacement
The Intimidator Wash Zoom 450 IRC has an auto­with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements ( listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product draw under normal conditions.
• Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by
Never connect the product if the rheostat or dimmer channel serves only as a 0 to 100% switch.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse.
4. Replace with a fuse of the same type and rating.
• Disconnect the product from the power outlet before replacing the fuse.
• Always replace a blown fuse with another of the same type and rating.
The product provides power linking via the IEC outlet located in the back of the product. Please see the diagram below for further explanation.
Diagram
You can power link up to 4 Intimidator Wash Zoom 450 IRC or up to 8 Intimidator Wash Zoom 450 IRC products on 230 VAC.
The power linking diagram corresponds to the
Page 8 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 9
Mounting
, read and follow the safety recommendations indicated in
Orientation
may be mounted in any position; however, make
sure adequate ventilation is provided around the product.
Safety Cable
Mounting Clamp
15N
clamp from Chauvet)
Mounting Bracket
Handle (x2)
Rubber Feet (x4)
for floor mounting
Mounting Hole for
Mounting Clamp
Mounting Holes for
Hanging/Mounting
Bracket
Safety Cable
Pass Through
Before mounting the product the Safety Notes.
The Intimidator Wash Zoom 450 IRC
Rigging
• Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
• Make sure that the structure or surface onto which you are mounting the product can support the product's weight. See the Technical Specifications
for weight
information. The CLP-15 clamp from Chauvet is appropriate for this product.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, you must always consider the length of the power linking cable and mount the products close enough for the cable to reach.
• The rubber feet also serve as floor supports. When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.
(works with CLP15 or CLP-
Mounting Diagram
When using only one mounting clamp with this fixture, you must use a clamp with a captive bolt to prevent accidental loosening.
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 9 of 27
Page 10
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
on the control
Button
Function
Press to find an operation mode or to back out of the current menu option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Menu Map
Main Function
Programming Levels
Description
Address
001–512
Sets the DMX starting address
14CH
29CH
Slave
Slave 1–4
Selects slave mode
Sound
Selects sound-active mode
Auto
Selects auto program
IR
Selects infrared control
OFF
Normal pan operation
ON
Reverse pan operation
OFF
Normal tilt operation
ON
Reverse tilt operation
540
Selects the 540° pan angle range
360
Selects the 360° pan angle range
180
Selects the 180° pan angle range
270
Selects the 270° tilt angle range
180
Selects the 180° tilt angle range
90
Selects the 90° tilt angle range
Normal
Fast
Slow
Auto
Sets fan speed according to temperature
Full
Fan speed set to full speed
OFF
Display background light turns off after inactivity
ON
Display background light stays on
OFF
Normal display
ON
Reverse display
Square
I Square
SCurve
Linear
Fast
Smooth
RED
GREEN
BLUE
WHITE
Sensitivity
001—100
Sets sound sensitivity
Reset
Resets the product
Factory Set
Loads factory defaults
Ver VX
Displays the software version
Running Mode XXXXX
Displays the current running mode
DMX Address XXX
Displays the current DMX address
Temperature XXX
Displays the LED temperature in Celsius

4. OPERATION

display. Please refer to the Product Overview to see the button locations panel.
<MENU>
Run Mode
Setup
DMX
Pan Reverse
Tilt Reverse
Pan Angle
Tilt Angle
P/T Speed
Fans
Display
Screen Rev
Dimmer Curve
Selects DMX mode
Selects the panning/tilting speed
Selects the dimmer curve mode
Dimmer Speed
Color Balance
Sys Info
Page 10 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Selects the dimmer speed
Selects color balance (100 to 255)
Page 11
Configuration
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
If you are not familiar with the DMX protocol, download the DMX Primer from
5. Press <ENTER>.
DMX
7. Press <ENTER>.
Set the product in DMX mode to control with a DMX controller.
(DMX)
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
Starting Address
Personalities
the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.
The Intimidator Wash Zoom 450 IRC uses up to 29 DMX channels in its 29-channel DMX mode, which defines the highest configurable address to 484.
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Address.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select the starting address.
The Intimidator Wash Zoom 450 IRC has two DMX personalities, a 29-channel personality and a 14-channel personality.
To choose which DMX personality to use, follow the steps below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select DMX.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to choose either 29CH (to choose the 29-channel personality) or 14CH (to choose the 14-channel personality).
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 11 of 27
Page 12

DMX Channel Assignments and Values

Channel
Function
Value
Percent/Setting
1
Pan
2
Fine Pan
Tilt
4
Fine Tilt
000255
Fine control of tilt
5
Speed
000255
6
Red
0–100%
Green
8
Blue
000255
0–100%
9
White
000255
0–100%
10
Red
0–100%
Green
12
Blue
000255
0–100%
13
White
000255
0–100%
14
Red
0–100%
Green
16
Blue
000255
0–100%
17
White
000255
0–100%
18
Red
0–100%
Green
20
Blue
000255
0–100%
21
White
000255
0–100%
Zones of Control
1
29CH
000255 0–540°
000255 Fine control of pan
3
7
11
15
000255 0–270°
Pan/Tilt speed (fast to slow)
000255
000255
000255
000255
000255
000255
0–100%
0–100%
0–100%
Zone 1
Zone 2
Zone 3
19
Intimidator Wash Zoom 450 IRC
000255
000255
0–100%
Zone 4
Page 12 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 13
Channel
Function
Value
Percent/Setting
000004
No function
010014
Color 2
015019
Color 3
020024
Color 4
025029
Color 5
030034
Color 6
035039
Color 7
040044
Color 8
045049
Color 9
050054
Color 10
055059
Color 11
060064
Color 12
065069
Color 13
070074
Color 14
075079
Color 15
080084
Color 16
085089
Color 17
090094
Color 18
095099
Color 19
100104
Color 20
105109
Color 21
110114
Color 22
115119
Color 23
120124
Color 24
125129
Color 25
130134
Color 26
135139
Color 27
140144
Color 28
145149
Color 29
150154
Color 30
155159
Color 31
160164
Color 32
165169
Color 33
170174
Color 34
175179
No function
180201
Clockwise color change (fast to slow)
202207
Stop (color stays in the current color)
208229
Counter-clockwise color change (fast to slow)
230234
No function
235249
Color jump (fast to slow)
250255
Sound-Active colors
29CH
(cont.)
005009 Color 1
22
Colors
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 13 of 27
Page 14
Channel
Function
Value
Percent/Setting
000015
No function
032047
Zone macro 2
048063
Zone macro 3
064079
Zone macro 4
080095
Zone macro 5
096111
Zone macro 6
112127
Zone macro 7 (zone macros 1–6)
128143
Built-in Auto 1
144159
Built-in Auto 2
160175
Built-in Auto 3
176191
Built-in Auto 4
192207
Built-in Auto 5
208223
Built-in Auto 6
224239
Built-in Auto 7
240255
Built-in Auto 8 (built-in auto 1–7)
Built in Speed
25
Dimmer
000255
0–100%
000019
Closed
025064
Strobe effect (fast to slow)
065069
Open
070084
Fast on, slow off (fast to slow)
085089
Open
Slow on, fast off (fast to slow)
105109
Open
110124
Random shutter (fast to slow)
125129
Open
130144
Random fast on, slow off (fast to slow)
150164
Random slow on, fast off (fast to slow)
165169
Open
170184
Pulse effect 1 (fast to slow)
185189
Open
205209
Open
210224
Gradually on and off (fast to slow)
225229
Open
230244
Pulse effect 3 (fast to slow)
27
Zoom
000255
Zoom in and out
29CH
(cont.)
016031 Zone macro 1
23
Built in Control
24
26
Shutter
000255 Zone macros and built-in auto speed (slow to fast)
020024 Open
090104
145149 Open
190204
Pulse effect 2 (fast to slow)
Page 14 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
245255 Open
Page 15
Channel
Function
Value
Percent/Setting
000009
No function
010014
Blackout while panning/tilting
015019
No function
020049
Reserved for future use
050054
Reset pan
055059
Reset tilt
060064
Reset zoom
065069
Reset rotation
070074
Reset all
075079
No function
080084
Reverse pan/tilt
085089
Reverse pan
090094
Reverse tilt
095099
Cancel reverse pan
100104
Cancel reverse tilt
105109
Cancel reverse pan/tilt
110114
Pan/Tilt normal speed
115119
Pan/Tilt fast speed
120124
Pan/Tilt slow speed
125129
Fan full speed
130134
Fan auto speed
135139
Dimmer fast
140144
Dimmer smooth
145255
No function
000007
No function
008023
Automatic movement macro 1
024039
Automatic movement macro 2
040055
Automatic movement macro 3
056071
Automatic movement macro 4
072087
Automatic movement macro 5
088103
Automatic movement macro 6
104119
Automatic movement macro 7
120135
Automatic movement macro 8
136151
Sound-Active movement macro 1
152167
Sound-Active movement macro 2
168183
Sound-Active movement macro 3
184199
Sound-Active movement macro 4
200215
Sound-Active movement macro 5
216231
Sound-Active movement macro 6
232247
Sound-Active movement macro 7
248255
Sound-Active movement macro 8
29CH
(cont.)
28
Control Functions
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 15 of 27
29
Movement Macros
Page 16
Channel
Function
Value
Percent/Setting
1
Pan
000255
0–540°
2
Tilt
Pan/Tilt Speed
4
Red
000255
0–100%
5
Green
000255
0–100%
6
Blue
White
000015
No function
016031
Zone macro 1
032047
Zone macro 2
048063
Zone macro 3
080095
Zone macro 5
096111
Zone macro 6
112127
Zone macro 7 (zone macros 1–6)
128143
Built-in Auto 1
160175
Built-in Auto 3
176191
Built-in Auto 4
192207
Built-in Auto 5
208223
Built-in Auto 6
240255
Built-in Auto 8 (built-in auto 1–7)
9
Built-in Speed
000255
Zone macros and built-in auto speed (slow to fast)
Dimmer
14CH
3
7
8
Built-in Control
000255
000255 Pan/Tilt speed (fast to slow)
000255
000255 0–100%
064079 Zone macro 4
144159 Built-in Auto 2
0–270°
0–100%
10
224239 Built-in Auto 7
000255 0–100%
Page 16 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 17
Channel
Function
Value
Percent/Setting
000019
Closed
020024
Open
025064
Strobe effect (fast to slow)
065069
Open
070084
Fast on, slow off (fast to slow)
085089
Open
090104
Slow on, fast off (fast to slow)
105109
Open
110124
Random shutter (fast to slow)
125129
Open
130144
Random fast on, slow off (fast to slow)
145149
Open
150164
Random slow on, fast off (fast to slow)
165169
Open
170184
Pulse effect 1 (fast to slow)
185189
Open
190204
Pulse effect 2 (fast to slow)
205209
Open
210224
Gradually on and off (fast to slow)
225229
Open
230244
Pulse effect 3 (fast to slow)
245255
Open
12
Zoom
000255
Zoom in and out
000009
No function
010014
Blackout while panning/tilting
015019
No function
020049
Reserved for future use
050054
Reset pan
055059
Reset tilt
060064
Reset zoom
065069
Reset rotation
070074
Reset all
075079
No function
080084
Reverse pan/tilt
085089
Reverse pan
090094
Reverse tilt
095099
Cancel reverse pan
100104
Cancel reverse tilt
105109
Cancel reverse pan/tilt
110114
Pan/Tilt normal speed
115119
Pan/Tilt fast speed
120124
Pan/Tilt slow speed
125129
Fan full speed
130134
Fan auto speed
135139
Dimmer fast
140144
Dimmer smooth
145255
No function
14CH
(cont.)
11
Shutter
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 17 of 27
13
Control Functions
Page 18
Channel
Function
Value
Percent/Setting
000007
No function
024039
Automatic movement macro 2
040055
Automatic movement macro 3
056071
Automatic movement macro 4
072087
Automatic movement macro 5
088103
Automatic movement macro 6
104119
Automatic movement macro 7
120135
Automatic movement macro 8
136151
Sound-Active movement macro 1
152167
Sound-Active movement macro 2
168183
Sound-Active movement macro 3
184199
Sound-Active movement macro 4
200215
Sound-Active movement macro 5
216231
Sound-Active movement macro 6
232247
Sound-Active movement macro 7
248255
Sound-Active movement macro 8
14CH
(cont.)
008023 Automatic movement macro 1
14
Movement Macros
Page 18 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 19
Configuration
(Standalone)
) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.
Automatic Mode
5. Press <ENTER>.
Active
5. Press <ENTER>.
7. Press <ENTER>.
Set the product in one of the standalone modes to control without a DMX controller.
• Connect the product to power.
Never connect a product that is operating in any standalone mode (Automatic, Sound-Active, or Manual
To enable the Automatic mode, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Auto.
Sound-
Mode
To enable the Sound-Active mode, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sound.
The product will only respond to low frequencies of music (bass and drums).
Sound Sensitivity
To set the sound sensitivity, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sensitivity.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 001-100, low to high.
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 19 of 27
Page 20
Pan/Tilt
will operate with normal panning
will operate with normal tilting or
7. Press <ENTER>.
7. Press <ENTER>.
Pan/Tilt Speed
7. Press <ENTER>.
7. Press <ENTER>.
7. Press <ENTER>.
To select whether the Intimidator Wash Zoom 450 IRC
Orientation
or inverted panning, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
7. Press <ENTER>. To select whether the Intimidator Wash Zoom 450 IRC
inverted tilting, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
Pan/Tilt Angle
Dimmer Curve
Dimmer Speed
To select which pan angle range to use, follow the instructions below:
Range
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Angle.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 540, 360, or 180.
7. Press <ENTER>. To select which tilt angle range to use, do the following.
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Angle.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select 240, 180, or 90.
To set the pan/tilt speed, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select P/T Speed.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Normal, Fast, or Slow.
To set the dimmer curve, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Dimmer Curve.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Square, I Squa, sCurve, or Linear.
To set the dimmer speed, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Dimmer Speed.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Fast or Smooth.
Page 20 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 21
Color Balance
10. Repeat steps 6-9 until the desired color balance is set.
follow the
7. Press <ENTER>.
Display
7. Press <ENTER>.
7. Press <ENTER>.
5. Press <ENTER>.
Factory
follow the
5. Press <ENTER>.
product temperature will show on the display.
To set the color balance, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Color Balance.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select RED, GREEN, BLUE, or WHITE.
7. Press <ENTER>.
8. Use <UP> or <DOWN> to increase or decrease the color value (100–255).
9. Press <ENTER>.
Display Timeout
Orientation
Fans
Reset
To select whether the display backlight should turn off after inactivity, instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Display.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
To set the display orientation on the Intimidator Wash Zoom 450 IRC, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Screen Rev.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select ON or OFF.
To set the fan speed, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Fans.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Auto or Full.
To restart the Intimidator Wash Zoom 450 IRC, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Reset.
Load
Defaults
To reset the Intimidator Wash Zoom 450 IRC to factory default settings, instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Factory Set.
System Info
To view system information, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Sys Info.
3. Press <ENTER>. The version number, running mode, DMX address, and current
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 21 of 27
Page 22
IR Mode
IR mode allows the product to be controlled with an infrared remote controller. The
6 can remotely set the product to various modes; adjust the color, speed and
IRC blinks.
IRC-6 Operation
between the remote and the product.
IRC­sensitivity; and set the strobe.
To set the product to IR mode, do the following:
1. Make sure the product is plugged into a power source and not connected to a DMX
cable.
2. Press <MENU>.
3. Use <UP> or <DOWN> to choose Run Mode.
4. Press <ENTER>.Use <UP> or <DOWN> to choose IR.
5. Press <ENTER> and the indicator on the front of the Intimidator Wash Zoom 450
Be sure the IRC-6 remote is pointing directly at the product and there is nothing in
The list below describes which features each button controls.
• <BLACKOUT> - Turns LED on and off.
• <AUTO> - Activates Auto mode. Use the <+> and <-> buttons to cycle through Auto
programs.
• <SOUND> - Activates Sound mode.
• <STROBE> - Activates the strobe. Use the <+> and <-> buttons to increase or
decrease strobe speed.
• <SPEED> - Adjusts the movement speed. Use the <+> and <-> buttons to increase
or decrease the pan/tilt speed.
• <SENSITIVITY> - Adjusts sound sensitivity. Use the <+> and <-> buttons to
increase or decrease the sound sensitivity.
• <%> - Adjusts the brightness of the LEDs. Use the <+> and <-> buttons to increase
or decrease the brightness of the LEDs.
• <FADE/SNAP> or <FADE> - Activates Color Fade mode and Color Snap mode. Press <FADE>/SNAP> to toggle Fade and Snap. Use the <+> and <-> buttons to increase or decrease the Fade/Snap speed (fast to slow).
• <MANUAL> - Activates Manual mode.
• <R> - Adjusts the red LEDs. Use the <+> and <-> buttons to increase or decrease
the red output.
• <G> - Adjusts the green LEDs. Use the <+> and <-> buttons to increase or decrease the green output.
• <B> - Adjusts the blue LEDs. Use the <+> and <-> buttons to increase or decrease the blue output.
• <W> - Adjusts the white LEDs. Use the <+> and <-> buttons to increase or decrease the white output.
• <A> - Adjusts the Pan/Tilt manually. Press <A> to toggle between Pan and Tilt. Use the <+> and <-> buttons to increase or decrease the Pan/Tilt value.
• <UV> or <P> - Adjusts the Zoom manually. Use the <+> and <-> buttons to increase or decrease the Zoom value.
• <+> - Increases values for controls as described above.
• <-> - Decreases values for controls as described above.
• <0>–<9> - Activates specific Auto modes. Can be used as a shortcut for the
combination of the <AUTO> button and the <+> and <-> buttons.
Page 22 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 23
Master/Slave
(the master) to
products (the slaves)
, while the slaves will be set to operate in Slave mode.
2. Make the master the first product in the DMX daisy chain.
Intimidator Wash Zoom product connected as a slave.
Do not connect more than 31 slave products to the master.
The Master/Slave mode allows a single Intimidator Wash Zoom 450 IRC control the actions of one or more Intimidator Wash Zoom 450 IRC
Mode
without the need of a DMX controller. The master will be set to operate in either Stand­Alone mode or with the IRC-6 Once set and connected, the slaves will operate in unison with the master.
Configure the products as indicated below. Slaves:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Slave.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select Slave 1, Slave 2, Slave 3, or Slave 4.
• Select Slave 1 for 100% synchronized actions.
• Select Slave 2, Slave 3, or Slave 4 for a delayed show with all heads in the
same direction but with a delay creating a wave effect.
7. Press <ENTER>.
8. Connect the DMX input of the first slave product to the DMX output of the master.
9. Connect the DMX input of the subsequent slaves to the DMX output of the previous slave.
10. Finish setting and connecting all the slaves.
Master:
1. Set the master to operate in either Stand-Alone mode or with the IRC-6.
When including Intimidator Wash Zoom products in Master/Slave configuration with Intimidator Wash Zoom 450 IRC products, you must observe the following:
• When the Intimidator Wash Zoom product is the master and the Intimidator Wash Zoom 450 IRC is connected as a slave, the Intimidator Wash Zoom 450 IRC must be set to DMX mode with a starting address of 001. DO NOT set the Intimidator Wash Zoom 450 IRC in Slave mode when an Intimidator Wash Zoom product is the master.
• The Intimidator Wash Zoom 450 IRC will not operate as the master to an
• Configure all the slaves before connecting the master to the DMX daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the master.
•
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 23 of 27
Page 24
Product
reduces light output performance and can cause overheating. This can
mechanical wear. To maintain optimum
s at least twice a month.
are that usage and environmental conditions could be contributing
7. Gently polish the transparent surfaces until they are free of haze and lint.
Do not spin the cooling fans using compressed air because you could damage

5. MAINTENANCE

Dust build-up
Maintenance
lead to reduction of the light source’s life and/or performance and minimize wear, clean your lighting product However, be aw factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
Always dry the transparent surfaces carefully after cleaning them.
the external surface/vents.
cleaner, or isopropyl alcohol.
them.
Page 24 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 25
Dimensions and
Height
(pointing upward)
7.6 in (194 mm)
10.9 in (277 mm)
14.3 in (363 mm)
15.8 lb (7.2 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 VAC, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
219 W
207 W
Operating
1.9 A
1 A
Power linking current
(products)
Fuse
F 5 A, 250 V
F 5 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
powerCON®-compatible
powerCON®-compatible
Power output connector
powerCON®-compatible
powerCON®-compatible
Power Cord plug
Edison (US)
Local plug
Light Source
Type
Power
Lifespan
LED
15 W
50,000 hours
Color
Quantity
Current
Quad-color RGBW
12
3.7 A
Photometrics
Parameter
Illuminance @ 2 m (14°)
25,610 lux
Illuminance @ 2 m (58°)
1,960 lux
Zoom Angle
7° to 53°
Strobe Rate
0 to 20 Hz
Pan and Tilt
540° Pan
270° Tilt
180°, 360°, 540°
Pan
90°, 180°, 270°
Tilt
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Fan-Assisted Convection
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
14 or 29
Ordering
Product Name
Item Code
UPC Number
Intimidator Wash Zoom 450
IRC

6. TECHNICAL SPECIFICATIONS

Weight
Length Width
Weight
13.6 A (4 products) 13.6 A (8 products)
Pan/Tilt Ranges
08010983 781462213312
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 25 of 27
Page 26
R
Benelux, France, Germany, or
Mexico, contact your distributor of record and follow their instructions on how to
Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to
brief description of the cause for the
Send the merchandise prepaid, in its original box, and with its original packing and
Write the RMA number on a properly affixed label. DO NOT write the RMA number
Before sending the product, clearly write the following information on a piece of paper
Be sure to pack the product properly. Any shipping damage resulting from inadequate
boxing are
ETURNS
To get support or return a product:
• If you are located in the US, contact Chauvet World Headquarters.
• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
• If you are located in France, contact Chauvet France.
• If you are located in Germany, contact Chauvet Germany.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact
your local distributor. See www.chauvetdj.com for distributors outside the US, UK, Ireland, Mexico, or Benelux.
If you are located outside the US, UK, Ireland,
return Chauvet products to them. Visit our website www.chauvetlighting.com for contact details.
provide the model number, serial number, and a return.
accessories. Chauvet will not issue call tags. Clearly label the package with the RMA number. Chauvet will refuse any product
returned without an RMA number.
directly on the box.
and place it inside the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
packaging will be your responsibility. FedEx packing or double­recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned product(s).
Page 26 of 27 Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Page 27
General Information
Technical Support
Chauvet World Headquarters
Address: 5200 NW 108th Avenue
Toll free: (800) 762-1084
Voice: (844) 393-7575
Website: www.chauvetdj.com
Chauvet Europe Ltd
Address: Unit 1C
Email: uktech@chauvetlighting.com
Chauvet Europe BVBA
Address: Stokstraat 18
Voice: +32 9 388 93 97
Email: Eutech@chauvetlighting.com
Chauvet France
Address: 3, Rue Ampère
Email: FRtech@chauvetlighting.fr
Chauvet Germany
Address: Bruno-Bürgel-Str. 11
Email: Eutech@chauvetlighting.de
Chauvet Mexico
Address: Av. de las Partidas 34-3B
Email: servicio@chauvetlighting.com.mx

CONTACT US

Sunrise, FL 33351 Voice: (954) 577-4455
Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115
9770 Kruishoutem Belgium
91380 Chilly-Mazarin France Voice: +33 1 78 85 33 59
28759 Bremen Germany Voice: +49 421 62 60 20
(Entrance by Calle 2) Zona Industrial Lerma Lerma, Mexico C.P. 52000 Voice: +52 (728) 690-2010
Email: chauvetcs@chauvetlighting.com
Website: www.chauvetdj.co.uk
Website: www.chauvetlighting.eu
Website: http://www.chauvetdj.fr
Website: http://www.chauvetdj.de
Website: www.chauvet.com.mx
Visit the applicable website above to verify our contact information and instructions to request support. Outside the US, UK, Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.
Intimidator Wash Zoom 450 IRC User Manual Rev. 2 Page 27 of 27
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use