Page 1
User Manual
Legend 412
Legend 412 VW
Page 2
Edition Notes
covers the description, safety
Trademarks
pertaining to services,
) are owned or
Copyright Notice
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for
Document Printing
Intended Audience
Document Revision
Edition Notes
The Legend™ 412 Series User Manual Rev. 5
precautions, installation, programming, operation, and maintenance of the Legend™
412 and the Legend 412 VW. CHAUVET® released this edition of the Legend™ 412
Series User Manual in August 2012.
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET®
or Chauvet). The CHAUVET® logo in its entirety including the CHAUVET name and
the dotted triangle, and all other trademarks in this manual
products, or marketing statements (example: It’s Green Thinking™
licensed by CHAUVET®. Any other product names, logos, brands, company names,
and other trademarks featured or referred to within this document are the property of
their respective trademark holders.
CHAUVET® owns the content of this user manual in its entirety, including but not
limited to pictures, logos, trademarks, and resources.
© Copyright 2012 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
professional information purposes only. CHAUVET® expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its content for
any other purpose without its written consent.
For better results, print this document in color, on letter size paper (8.5 x 11 inches),
double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the
content accordingly.
Any person in charge of installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as this
manual, before installing, operating, or maintaining this product.
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any errors or
omissions in this document. CHAUVET® reserves the right to revise and make
Disclaimer
changes to the content of this document without obligation that CHAUVET® notify
any person or company of such revision or changes. This does not in any way
constitute a commitment by CHAUVET® to make such changes. CHAUVET® may
issue a revision of this manual or a new edition to incorporate such changes.
The Legend™ 412 Series User Manual Rev. 5 supersedes all previous versions of
this manual. Discard any older versions of this manual you may have, whether in
printed or electronic format, and replace with this version.
Author Date Editor Date
D. Couppe 12/30/11 S. Diaz 8/24/12
Legend™ 412 Series User Manual Rev. 5
Page 3
Table of Contents
1. Before You Begin ............................................................................................... 1
What Is Included ............................................................................................................ 1
Unpacking Instructions ................................................................................................... 1
Claims ................................................................................................................................... 1
Conventions ................................................................................................................... 1
Symbols ......................................................................................................................... 2
Product at a Glance ....................................................................................................... 2
Expected LED Lifespan .................................................................................................. 2
Safety Notes .................................................................................................................. 3
Personal Safety ...................................................................................................................... 3
Mounting and Rigging ............................................................................................................. 3
Power and Wiring ................................................................................................................... 3
Operation ............................................................................................................................... 3
2. Introduction ........................................................................................................ 4
Product Description ........................................................................................................ 4
Legend™ 412 Features .......................................................................................................... 4
Legend™ 412 VW Features .................................................................................................... 4
Product Overview ........................................................................................................... 5
Product Dimensions ....................................................................................................... 6
Product Dimensions (Cont.) ........................................................................................... 7
Table of Contents
3. Setup ................................................................................................................... 8
AC Power ...................................................................................................................... 8
AC Plug ................................................................................................................................. 8
Fuse Replacement ................................................................................................................. 8
DMX Linking .................................................................................................................. 9
DMX Modes ........................................................................................................................... 9
Master/Slave Connectivity....................................................................................................... 9
Mounting .......................................................................................................................10
Orientation ........................................................................................................................... 10
Rigging ................................................................................................................................ 10
Procedure ............................................................................................................................ 10
Product Mounting Diagram ................................................................................................... 10
4. Operation .......................................................................................................... 11
Control Panel Description ..............................................................................................11
Control Options Legend 412 ................................................................................................. 11
Control Options Legend 412 VW ........................................................................................... 11
Programming ................................................................................................................11
DMX Personality................................................................................................................... 11
DMX Control ........................................................................................................................ 12
Static Color .......................................................................................................................... 12
Auto Programs ..................................................................................................................... 12
Master/Slave ........................................................................................................................ 13
Color Settings....................................................................................................................... 13
Blackout Mode ..................................................................................................................... 13
Display Mode ....................................................................................................................... 13
Pan Invert ............................................................................................................................ 13
Tilt Invert .............................................................................................................................. 13
Display Invert ....................................................................................................................... 13
LED Temperature ................................................................................................................. 14
CPU Temperature ................................................................................................................ 14
Product Hours ...................................................................................................................... 14
Software Version .................................................................................................................. 14
Self-Test .............................................................................................................................. 14
Legend™ 412 Series User Manual Rev. 5 -i-
Page 4
Table of Contents
Reset ................................................................................................................................... 14
Factory Defaults ................................................................................................................... 14
Menu Map (Legend™ 412)............................................................................................15
Menu Map cont. (Legend™ 412) ...................................................................................16
Menu Map (Legend™ 412 VW) .....................................................................................17
Menu Map cont. (Legend™ 412 VW).............................................................................18
DMX Values (Legend™ 412) .........................................................................................19
12-Channel .......................................................................................................................... 19
28-Channel .......................................................................................................................... 20
28-Channel Cont. ................................................................................................................. 21
28-Channel Cont. ................................................................................................................. 22
DMX Values (Legend™ 412 VW) ..................................................................................23
10-Channel .......................................................................................................................... 23
20-Channel .......................................................................................................................... 24
20 Channel Cont. ................................................................................................................. 25
5. Technical Information ...................................................................................... 26
Product Maintenance ....................................................................................................26
Troubleshooting Guide ..................................................................................................27
Returns Procedure ........................................................................................................28
Contact Us ....................................................................................................................28
Technical Specifications Legend™ 412 .........................................................................29
Technical Specifications Legend™ 412 VW ..................................................................30
-ii- Legend™ 412 Series User Manual Rev. 5
Page 5
1. Before You Begin
What Is
Unpacking
Instructions
Make
Claims
included accessories)
signs of mishandling, upon receipt notify the
the container and all the packing material for
within 7 days of receiving the
Conventions
1~512
A range of values in the text
50/60
A set of mutually exclusive values in the text
this document
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU > Settings
A sequence of menu options
1~10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
• One Legend™ 412 or Legend™ 412 VW
Included
• One Eye Bolt (for safety cable)
• One Omega Bracket with M12 Bolts
• Warranty Card
• Quick Reference Guide
Immediately upon receiving this product, carefully unpack and check the container.
sure you have received all the parts indicated above and all the parts are in good condition.
If the container or the material inside the container (the product and
appear damaged from shipping, or show
carrier immediately, not CHAUVET®. Failure to notify the carrier in a timely manner may
invalidate your claim. In addition, keep
inspection.
For other issues such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET®
merchandise.
Refer to the Contact Us section in this manual for addresses and phone numbers.
Before You Begin
Convention Meaning
Claims
A new term, another document reference, or section or chapter in
Legend™ 412 Series User Manual Rev. 5 -1-
Page 6
Symbols
Critical installation, configuration, or operation information. Failure
harm to the user.
Important installation or configuration information. Failure to
functioning correctly.
Product at a
to an optimal operating
Before You Begin
Symbol Meaning
to comply with this information may render the product partially or
completely inoperative, damage third-party equipment, or cause
Glance
Expected LED
Lifespan
The term “DMX” used throughout this manual refers to the USITT DMX512-A
transmission protocol.
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single LED conditions.
For this reason, using clustered LEDs at their fullest intensity significantly reduces the
LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If
extending this lifespan is vital, lower the operational temperature by improving the
product’s ventilation and reducing the ambient temperature
temperature. In addition, limiting the overall projection intensity may also help to extend
the LEDs’ lifespan.
comply with this information may prevent the product from
Useful information.
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User Serviceable
Duty Cycle
-2- Legend™ 412 Series User Manual Rev. 5
Page 7
Before You Begin
Safety Notes
Personal Safety
Mounting and
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this
Power and Wiring
Operation
• Do not operate this product if you see damage on the housing, lenses or cables. Have
In case of a serious operating problem, stop using this product immediately!
Read all the following Safety Notes before working with this product. These Notes include
important information about the installation, usage, and maintenance of this product.
There are no user-serviceable parts in this product. Any reference to servicing in
this User Manual applies only to properly certified CHAUVET® technicians. Do not
open the housing or attempt any repairs unless you are certified.
Please refer to all applicable local codes and regulations for the proper installation
of this product.
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect this product from its power source before servicing.
• Always connect this product to a grounded circuit to avoid the risk of electrocution.
• Do not touch this product’s housing when operating because it may be very hot.
Rigging
product to rain or moisture.
• Make sure there are no flammable materials close to this product while operating.
• When hanging this product, always secure it to a fastening device using a saf ety cable
(not included).
• Do not carry this product from the head. Always use the base.
• Always make sure you are connecting this product to the proper voltage, as per the
specifications in this manual or on the product’s specification label.
• Never connect this product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
the damaged parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 104° F (40° C). Do not operate this product at a
higher temperature.
•
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Legend™ 412 Series User Manual Rev. 5 -3-
Page 8
Product
Legend™ 412
Legend™ 412 VW
Introduction
2. Introduction
Description
Features
Features
The Legend™ 412 Series consists of high power LED moving head wash products with 4
independent quadrants of control. It is available in a RGBW version or a VW (variable
white) version with quad color LEDs. The product consists of a base and a moving head
on a yoke. A Top Hat is pre-installed to reduce glare, creating a flat field of light.
• 12- or 28-channel RGBW quad color LED moving yoke wash product
• Pan: 630°
• Tilt: 200°
• RGBW quad color mixing with or without DMX controller
• Fast movement
• Bright quad color LEDs
• Strobe macros with quadrant strobe
• Flicker free operation for HD cameras
• 10- or 20-channel VW quad color LED moving yoke wash product
• Pan: 630°
• Tilt: 200°
• VW quad color mixing with or without DMX controller
• Fast movement
• Bright quad color LEDs
• Strobe macros with quadrant strobe
• Fast movement
• Flicker-free operation for HD cameras
-4- Legend™ 412 Series User Manual Rev. 5
Page 9
Introduction
Rear View
Side View
DMX In/Out
Power/Fuse
Control Panel
Product Overview
Legend™ 412 Series User Manual Rev. 5 -5-
Page 10
6.5 in
165 mm
12.0 in
304 mm
3.1 in
80 mm
7.2 in
182 mm
10.1 in
257 mm
11.2 in
285 mm
10.6 in
269 mm
Introduction
Product Dimensions
-6- Legend™ 412 Series User Manual Rev. 5
Page 11
Introduction
3.5 in
89 mm
5.5 in
140 mm
4.5 in
114 mm
Product Dimensions (Cont.)
Legend™ 412 Series User Manual Rev. 5 -7-
Page 12
AC Power
with an input
AC Plug
se the table
Fuse Replacement
Installed fuse
(held by plastic clip)
Spare fusel
(inside safety cap)
Safety cap
Setup
3. Setup
The Legend™ 412 Series has an auto-ranging power supply that works
voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage. To determine the
power requirements for the Legend™ 412 Series, refer to the specification label affixed to
the product or the specifications in this manual.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
The listed current rating indicates the maximum current draw during normal operation. For
more information, download Sizing the Circuit Breakers from www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
The Legend™ 412 Series should be used with a power input cord terminated with an IEC
connector on one end and an Edison plug on the other end (U.S. market). U
below to wire a new plug if needed.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Make sure to disconnect the product’s power cord before replacing a blown fuse,
and always replace it with a fuse of the same type and rating.
This product uses a T 3.15 A, 250 V fuse.
1. Disconnect the product from the power outlet.
2. Using a flat head screwdriver, wedge the tip into the slot of the fuse holder.
3. Pry the safety cap out of the housing to pull out the installed fuse.
4. Remove the blown fuse from the safety cap and replace with a fuse of the exact same
type and rating (T 3.15 A, 250 V).
5. Insert the fuse holder back in place and reconnect power.
-8- Legend™ 412 Series User Manual Rev. 5
This product ships with a spare fuse inside the safety cap, as shown above.
Page 13
DMX Linking
DMX Modes
Master/Slave
Connectivity
without a
Setup
You can link the Legend™ 412 Series to a DMX controller using a standard 5-pin DMX
serial connection. If using other DMX compatible products with the Legend™ 412 Series,
you can control each individually with a single DMX controller.
The Legend™ 412 Series uses the standard 5-pin DMX data connection for its ADVANCED
and BASIC DMX personalities.
Refer to the Introduction chapter for a brief description of these modes.
Refer to the Operation chapter to learn how to configure the Legend™ 412 Series to work in
these modes.
The DMX Values section will provide you with detailed information regarding the DMX
modes.
The Master/Slave mode allows a Legend™ 412 or a Legend™ 412 VW (the “master unit”)
to control one or more Legend™ 412’s or Legend™ 412 VW’s (the “slave units”)
DMX controller. The product becomes the master unit when set in master mode via the
control panel. You must configure the slave units to operate in one of the two (2) slav e
modes from their respective control panels. During the Master/Slave operation, the slave
units will operate in unison with the master unit or run offset depending on the slave mode
chosen.
Do not connect a Legend™ 412 together with a Legend™ 412 VW in Master/Slave
mode.
If you are not familiar with or need more information about DMX standards, master/slave
connectivity, or the DMX cables needed to link this product to a DMX controller, download
the DMX Primer from the CHAUVET® website: www.chauvetpro.com
DO NOT connect a DMX controller to the products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master product.
The Operation chapter of this manual provides detailed instructions on how to
configure the Master and Slave products.
Legend™ 412 Series User Manual Rev. 5 -9-
Page 14
Mounting
Orientation
Rigging
Procedure
to the bottom of
to hang the
Safety Cable
Bracket
Setup
Before mounting this product, read and follow the Safety Notes in this manual.
Always mount this product in any safe position making sure there is adequate room for
ventilation, configuration, and maintenance.
CHAUVET® recommends using the following general guidelines when mounting this
product.
• When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
• Never mount the product in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
• If hanging this product, make sure that the mounting location can support the product’s
weight. Refer to the Technical Specifications section for the weight requirement of this
product.
The Legend™ 412 Series comes with 1 omega bracket, which attaches
the product via M12 Allen bolts. This allows you to attach a single clamp
product. You may also attach 2 clamps directly to the fixture via the same 2 M12 mounting
screw holes. You must supply your own clamps and make sure the clamps are capable of
supporting the weight of this product.
Product Mounting
Diagram
-10- Legend™ 412 Series User Manual Rev. 5
Page 15
4. Operation
Control Panel
Control Options
Control Options
Programming
DMX Personality
Description
Legend 412
Legend 412 VW
Operation
Button Function
<MENU>
<ENTER>
<UP>
<DOWN>
You can set the Legend™ 412 start address in the 001~512 DMX range. This enables
control of up to 18 units in the 28 channel ADVANCED personality.
You can set the Legend™ 412 VW start address in the 001~512 DMX range. This enables
control of up to 25 units in the 20 channel ADVANCED personality.
Refer to the Menu Map to understand the menu options. The menu map has a Menu Level
and a variable number of programming levels for each option.
• To go to an option in the Menu Level, press <MENU> repeatedly until the option shows
on the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
• To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will see
the selected value.
• To exit to the previous menu level, press <MENU>.
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected
value in to the current function
Navigates upward through the menu list and increases the numeric
value when in a function
Navigates downward through the menu list and decreases the numeric
value when in a function
Legend™ 412 Series User Manual Rev. 5 -11-
This setting allows you to choose a particular DMX personality.
1. Go to Chnd and press <ENTER>.
2. Select the desired personality based on the product.
• Legend™ 412:
Select 12Ch (Basic) or 28Ch (Advanced)
• Legend™ 412 VW:
Select 10Ch (Basic) or 20Ch (Advanced)
• See the DMX Values section for the highest starting address you can select for
each personality.
• Make sure that the starting addresses on the various products do not overlap
due to the new personality setting. See the DMX Values section.
Page 16
DMX Control
001~512
DMX Mode
DMX Address
DMX Mode
DMX Address
Advanced
485
Advanced
493
Basic
501
Basic
503
Static Color
Auto Programs
Operation
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in the DMX Personality section.
2. Set the starting address:
a. Go to Addr and press <ENTER>.
b. Select the starting address (
).
The highest recommended starting address for each DMX mode are as follows:
Legend™ 412 Legend™ 412 VW
The Static mode allows for permanent positioning, strobing, dimming, and RGBW or VW
color mixing without a DMX controller.
1. Go to NAnu and press <ENTER>.
2. Select the desired position (Pan or tILt).
3. Select the desired position value (0~255).
4. Repeat for the other position.
5. Select the desired color based on the product.
• Legend™ 412:
Red1~4, Gre1~4, bLu1~4, or UhI1~4.
• Legend™ 412 VW:
UU1~4, or CU1~4.
6. Select the desired color value (0~255).
7. Repeat for the other colors.
8. Select the desired intensity (dINN).
9. Select the desired intensity value (0~255).
10. Select Strobe effect (Stro).
11. Select the desired frequency (0~255).
-12- Legend™ 412 Series User Manual Rev. 5
Auto programs allow for dynamic RGBW (Legend™ 412) or VW (Legend™ 412 VW) color
mixing without a DMX controller.
1. Go to Shnd and press <ENTER>.
2. Select the desired auto program (Sh 1~4).
You cannot edit any of the auto programs (Sh 1~4).
Page 17
Operation
Master/Slave
Sh 1~4
units configured for Master/Slave
Color Settings
Blackout Mode
Display Mode
Pan Invert
Tilt Invert
Display Invert
The Master/Slave mode allows a group of Legend™ 412’s or Legend™ 412 VW’s (the
slav e units) to simultaneously duplicate the output of another Legend™ 412 or Legend™
412 VW (the master unit) without a DMX controller.
1. Set each of the slave units:
a. Go to SLNd and press <ENTER>.
b. Select SL 1 (duplicates the master unit exactly) or SL 2 (offsets pan and tilt
settings that creates a different look).
2. Set the master unit:
a. Go to SLNd and press <ENTER>.
b. Select NASt.
c. Go to ShNd and press <ENTER>.
d. Select the desired auto program (
).
Do not connect a Legend™ 412 together with a Legend™ 412 VW in Master/Slave
mode.
• The master unit is the one that runs an auto program.
• Do not connect a DMX controller to the
operation.
• The master unit should be the first unit in the DMX daisy string.
(Legend™ 412 Only)
The color setting determines how the Legend™ 412 generates the white color based on
various RGB settings.
1. Go to bALA and press <ENTER>.
2. Select red, Gree, or bLue.
3. Select the desired color value (125~255).
4. Repeat for the other colors.
This setting determines whether the Legend™ 412 or the Legend™ 412 VW starts playing
an auto program when powered up or remains static in the “Home” position.
1. Go to bLnd and press <ENTER>.
2. Select YeS or no.
This setting determines whether the control panel display stays on indefinitely or turns off
after 2 minutes of inactivity.
1. Go to Led and press <ENTER>.
2. Select YeS or no.
This setting allows the user to invert the direction of the pan control.
1. Go to PAn and press <ENTER>.
2. Select YeS or no.
This setting allows the user to invert the direction of the tilt control.
1. Go to tILt and press <ENT ER>.
2. Select YeS or no.
This setting allows the user to invert the direction of the control panel display.
1. Go to Led and press <ENTER>.
2. Select on or oFF.
Legend™ 412 Series User Manual Rev. 5 -13-
Page 18
LED Temperature
) of the Legend™ 412 or the
CPU Temperature
Product Hours
Legend™ 412
Software Version
the Legend™ 412 or
Self-Test
Reset
Factory Defaults
the Legend™ 412 VW to the
Operation
This option allows the user to view the LED temperature (C°
Legend™ 412 VW.
1. Go to Ledt.
2. Press <ENTER>.
This option allows the user to view the CPU temperature (C°) of the Legend™ 412 or the
Legend™ 412 VW.
1. Go to CPut.
2. Press <ENTER>.
This option shows the user the amount of hours the Legend™ 412 or the
VW has been in use throughout its lifetime.
1. Go to FhrS.
2. Press <ENTER>.
This option shows the user the software version currently installed in
the Legend™ 412 VW.
1. Go to ver.
2. Press <ENTER>.
This setting allows the user to set the Legend™ 412 or the Legend™ 412 VW to the
self-test mode.
1. Go to teSt.
2. Press <ENTER>.
This setting allows the user to reset the Legend™ 412 or the Legend™ 412 VW to the
“Home” position.
1. Go to rSet.
2. Press <ENTER>.
This setting allows the user to set the Legend™ 412 or
original factory default settings.
1. Go to Prod and press <ENTER>.
2. Select YeS or no.
-14- Legend™ 412 Series User Manual Rev. 5
Page 19
Menu Map (Legend™ 412)
Addr
1~512
12Ch
28Ch
NASt
SL 1
SL 2
Sh 1
Sh 2
Sh 3
Sh 4
YeS
no
YeS
no
YeS
no
on
oFF
red
Gree
bLue
Main Level Programming Levels Description
Sets the DMX starting address
Chnd
SLnd
Sets the 12 channel personality
Sets the 28 channel personality
Sets product to Master in Slave mode
Sets product to Slave 1 in Slave mode
Sets product to Slave 2 in Slave mode
Operation
Shnd
bLnd
Led
PAn
tILt
dISP
bALA
Sets the Auto program
Selects whether Blackout mode is active
on
oFF
125~255
Selects whether the display stays on
indefinitely or turns off after 2 minutes of
inactivity
Pan is inverted
Pan is normal
Tilt is inverted
Tilt is normal
Display is inverted
Display is normal
Set White Balance
-Continued on next page-
Legend™ 412 Series User Manual Rev. 5 -15-
Page 20
Main Level
Programming Levels
Description
Pan
tILt
Red1
Gre1
bLu1
UhI1
Red2
Gre2
bLu2
UhI2
Red3
Gre3
bLu3
UhI3
Red4
Gre4
bLu4
UhI4
dINN
Stro
teSt
Ledt
CPut
FhrS
ver
YeS
no
rSet
Operation
Menu Map cont. (Legend™ 412)
NAnu
Sets Pan 0~630°
Sets Pan 0~200°
Sets Quadrant 1 Red LED intensity
Sets Quadrant 1 Green LED intensity
Sets Quadrant 1 Blue LED intensity
Sets Quadrant 1 White LED intensity
Sets Quadrant 2 Red LED intensity
Sets Quadrant 2 Green LED intensity
Sets Quadrant 2 Blue LED intensity
0~255
Sets Quadrant 2 White LED intensity
Sets Quadrant 3 Red LED intensity
Sets Quadrant 3 Green LED intensity
Sets Quadrant 3 Blue LED intensity
Sets Quadrant 3 White LED intensity
Sets Quadrant 4 Red LED intensity
Sets Quadrant 4 Green LED intensity
Sets Quadrant 4 Blue LED intensity
Sets Quadrant 4 White LED intensity
Sets dimmer intensity for all LEDs
Sets strobe rate 0~30 Hz
N/A Runs Self-test program
N/A
N/A
N/A
N/A
Shows LED temperature (C°)
Shows CPU temperature (C°)
Shows fixture hours
Shows software version
Prod
N/A
-16- Legend™ 412 Series User Manual Rev. 5
Reset product to factory default
Resets product to “Home” Position
Page 21
Menu Map (Legend™ 412 VW)
Main Level
Programming Levels
Description
Addr
1~512
10Ch
20Ch
NASt
SL 1
SL 2
Sh 1
Sh 2
Sh 3
Sh 4
YeS
no
no
Pan is normal
YeS
on
Display is inverted
oFF
Chnd
SLnd
Operation
Sets the DMX starting address
Sets the 10 channel personality
Sets the 20 channel personality
Sets product to Master in Slave mode
Sets product to Slave 1 in Slave mode
Sets product to Slave 2 in Slave mode
Shnd
bLnd
Led
PAn
tILt
dISP
on
oFF
YeS
no
-Continued on next page-
Sets the Show mode
Selects whether Blackout mode is active
Selects whether the display stays on
indefinitely or turns off after 2 minutes of
inactivity
Pan is inverted
Tilt is inverted
Tilt is normal
Display is normal
Legend™ 412 Series User Manual Rev. 5 -17-
Page 22
Main Level
Programming Levels
Description
Pan
tILt
UU1
CU1
UU2
CU2
UU3
CU3
UU4
CU4
dINN
Stro
teSt
Ledt
CPut
FhrS
ver
YeS
no
rSet
Operation
Menu Map cont. (Legend™ 412 VW)
NAnu
N/A Runs Self-test program
N/A
N/A
N/A
N/A
0~255
Sets Pan 0~630°
Sets Pan 0~200°
Quadrant 1 warm white LED intensity
Quadrant 1 cool white LED intensity
Quadrant 2 warm white LED intensity
Quadrant 2 cool white LED intensity
Quadrant 3 warm white LED intensity
Quadrant 3 cool white LED intensity
Quadrant 4 warm white LED intensity
Quadrant 4 cool white LED intensity
Sets dimmer intensity for all LEDs
Strobe rate 0~30 Hz
Shows LED temperature (C°)
Shows CPU temperature (C°)
Shows fixture hours
Shows software version
Prod
N/A
Reset product to factory default
Resets product to “Home” Position
-18- Legend™ 412 Series User Manual Rev. 5
Page 23
DMX Values (Legend™ 412)
12-Channel
1
Pan
000 255
0~100%
2
Pan Fine
000 255
0~100%
3
Tilt
000 255
0~100%
4
Tilt Fine
000 255
0~100%
5
Pan/Tilt Speed
000 255
0~100%
6
Dimmer
000 255
0~100%
000 019
220 255
Open
Open Full
8
Red
000 255
0~100%
9
Green
000 255
0~100%
10
Blue
000 255
0~100%
11
White
000 255
0~100%
000 007
237 255
No function
Reserved for future use
Note: Speed will vary
Channel Function Value Percent/Setting
(Basic Mode)
Operation
020 039
040 059
060 079
080 099
7 Strobe
12 Control
100 119
120 139
140 159
160 179
180 199
200 219
008 069
070 129
130 190
191 205
206 221
222 236
Strobe 0~30 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Effect 1
Strobe Effect 2
Strobe Effect 3
Strobe Effect 4
Reset Pan/Tilt
Reset All
Move in Black
Reserved for future use
Reserved for future use
Reserved for future use
dependent on value
within the strobe
effect/macro.
Legend™ 412 Series User Manual Rev. 5 -19-
Page 24
28-Channel
1
Pan
000 255
0~100%
2
Pan Fine
000 255
0~100%
3
Tilt
000 255
0~100%
4
Tilt Fine
000 255
0~100%
5
Pan/Tilt Speed
000 255
0~100%
6
Dimmer
000 255
0~100%
000 019
220 255
Open
Open Full
8
Red Quad 1
000 255
0~100%
9
Green Quad 1
000 255
0~100%
10
Blue Quad 1
000 255
0~100%
11
White Quad 1
000 255
0~100%
12
Red Quad 2
000 255
0~100%
13
Green Quad 2
000 255
0~100%
14
Blue Quad 2
000 255
0~100%
15
White Quad 2
000 255
0~100%
16
Red Quad 3
000 255
0~100%
17
Green Quad 3
000 255
0~100%
18
Blue Quad 3
000 255
0~100%
19
White Quad 3
000 255
0~100%
20
Red Quad 4
000 255
0~100%
21
Green Quad 4
000 255
0~100%
22
Blue Quad 4
000 255
0~100%
23
White Quad 4
000 255
0~100%
Note: Speed will vary
Operation
(Advanced Mode)
Channel Function Value Percent/Setting
020 039
040 059
060 079
080 099
7 Strobe
100 119
120 139
140 159
160 179
180 199
200 219
Strobe 0~30 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Effect 1
Strobe Effect 2
Strobe Effect 3
Strobe Effect 4
dependent on value
within the strobe
effect/macro.
-20- Legend™ 412 Series User Manual Rev. 5
Page 25
Operation
28-Channel Cont.
(Advanced Mode)
Channel
Function
Value
Percent/Setting
000 019
240 255
No Function
Macro 23
25
Color Macro Speed
000 255
0~100%
000 007
248 255
No Function
Macro 31
24 Color Macros
26 Pan/Tilt Macro
020 029
030 039
040 049
050 059
060 069
070 079
080 089
090 099
100 109
110 119
120 129
130 139
140 149
150 159
160 169
170 179
180 189
190 199
200 209
210 219
220 229
230 239
008 015
016 023
024 031
032 039
040 047
048 055
056 063
064 071
072 079
080 087
088 095
096 103
104 111
112 119
120 127
128 135
136 143
144 151
152 159
160 167
168 175
176 183
184 191
192 199
200 207
208 215
216 223
224 231
232 239
240 247
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
Macro 24
Macro 25
Macro 26
Macro 27
Macro 28
Macro 29
Macro 30
Legend™ 412 Series User Manual Rev. 5 -21-
Page 26
28-Channel Cont.
Channel
Function
Value
Percent/Setting
27
Pan/Tilt Macro Speed
000 255
0~100%
000 007
237 255
No function
Reserved for future use
Operation
(Advanced Mode)
28 Control
008 069
070 129
130 190
191 205
206 221
222 236
Reset Pan/Tilt
Reset All
Move in Black
Reserved for future use
Reserved for future use
Reserved for future use
-22- Legend™ 412 Series User Manual Rev. 5
Page 27
DMX Values (Legend™ 412 VW)
10-Channel
1
Pan
000 255
0~100%
2
Pan Fine
000 255
0~100%
3
Tilt
000 255
0~100%
4
Tilt Fine
000 255
0~100%
5
Pan/Tilt Speed
000 255
0~100%
6
Dimmer
000 255
0~100%
000 019
220 255
Open
Open Full
8
Warm White
000 255
0~100%
9
Cool White
000 255
0~100%
000 007
237 255
No function
Reserved for future use
Note: Speed will vary
Channel Function Value Percent/Setting
(Basic Mode)
Operation
020 039
040 059
060 079
080 099
7 Strobe
10 Control
100 119
120 139
140 159
160 179
180 199
200 219
008 069
070 129
130 190
191 205
206 221
222 236
Strobe 0~30 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Effect 1
Strobe Effect 2
Strobe Effect 3
Strobe Effect 4
Reset Pan/Tilt
Reset All
Move in Black
Reserved for future use
Reserved for future use
Reserved for future use
dependent on value
within the strobe
effect/macro.
Legend™ 412 Series User Manual Rev. 5 -23-
Page 28
20-Channel
1
Pan
000 255
0~100%
2
Pan Fine
000 255
0~100%
3
Tilt
000 255
0~100%
4
Tilt Fine
000 255
0~100%
5
Pan/Tilt Speed
000 255
0~100%
6
Dimmer
000 255
0~100%
000 019
220 255
Open
Open Full
8
Warm White Quad 1
000 255
0~100%
9
Cool White Quad 1
000 255
0~100%
10
Warm White Quad 2
000 255
0~100%
11
Cool White Quad 2
000 255
0~100%
12
Warm White Quad 3
000 255
0~100%
13
Cool White Quad 3
000 255
0~100%
14
Warm White Quad 4
000 255
0~100%
15
Cool White Quad 4
000 255
0~100%
000 019
240 255
No Function
Macro 23
17
Color Macro Speed
000 255
0~100%
Note: Speed will vary
Operation
(Advanced Mode)
Channel Function Value Percent/Setting
020 039
040 059
7 Strobe
16 Color Macros
060 079
080 099
100 119
120 139
140 159
160 179
180 199
200 219
020 029
030 039
040 049
050 059
060 069
070 079
080 089
090 099
100 109
110 119
120 129
130 139
140 149
150 159
160 169
170 179
180 189
190 199
200 209
210 219
220 229
230 239
Strobe 0~30 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Effect 1
Strobe Effect 2
Strobe Effect 3
Strobe Effect 4
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
dependent on value
within the strobe
effect/macro.
-24- Legend™ 412 Series User Manual Rev. 5
Page 29
Operation
20 Channel Cont.
Channel
Function
Value
Percent/Setting
000 007
248 255
No Function
Macro 31
19
Pan/Tilt Macro Speed
000 255
0~100%
000 007
237 255
No function
Reserved for future use
(Advanced Mode)
18 Pan/Tilt Macro
008 015
016 023
024 031
032 039
040 047
048 055
056 063
064 071
072 079
080 087
088 095
096 103
104 111
112 119
120 127
128 135
136 143
144 151
152 159
160 167
168 175
176 183
184 191
192 199
200 207
208 215
216 223
224 231
232 239
240 247
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
Macro 24
Macro 25
Macro 26
Macro 27
Macro 28
Macro 29
Macro 30
Legend™ 412 Series User Manual Rev. 5 -25-
20 Control
008 069
070 129
130 190
191 205
206 221
222 236
Reset Pan/Tilt
Reset All
Move in Black
Reserved for future use
Reserved for future use
Reserved for future use
Page 30
Product
Technical Information
5. Technical Information
To maintain optimum performance and minimize wear, clean this product frequently.
Maintenance
Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean a product, follow the recommendations below:
• Unplug the unit from power.
• Wait until the unit has cooled.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents and accessible internal components.
• Clean all external optics and plastic surfaces with a mild solution of non-ammonia
glass cleaner or isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
• Wipe any dirt or grime to the outside edge of the lens surface.
• Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external optics and plastic surfaces carefully after cleaning them.
Refrain from spinning this product’s fan using compressed air.
-26- Legend™ 412 Series User Manual Rev. 5
Page 31
Troubleshooting Guide
Symptom
Cause(s)
Action(s)
Dimmer fader set to “0”
Increase the value of the dimmer channel
All color faders set to “0”
Increase the value of the color channels
All colors in Static mode are set to “0”
Increase the values of the colors
No power
Verify external power circuit and wiring
Faulty internal power supply
Faulty main control board
Faulty LED
Faulty LED module
Faulty LED driver
Two or more LEDs do
module
Wrong personality
Change the personality
Wrong DMX address
Change the DMX address
Excessive circuit load
Reduce total load placed on the electrical circuit
Short circuit along the power wires
Check electrical wiring
No power
Check for voltage on outlet
Loose or damaged power cord
Check power cord
Blown fuse
Replace fuse
Faulty internal power supply
Send unit for repair
Wrong DMX addressing
Check unit addressing
Damaged DMX cables
Check DMX cables
Wrong polarity on the controller
Check polarity switch settings on the controller
Loose DMX cables
Check cable connections
Non DMX cables
Use only DMX compatible cables
Bouncing signals
Install terminator as suggested
the strong signal
Install an optically coupled DMX splitter after unit
#32
Keep DMX cables separated from power cables
or fluorescent/black lights
Faulty Display/Main/DMX interface board
Send unit for repair
Faulty Display/Main board
Send unit for repair
Product does not light up
Technical Information
Send unit for repair
One of the LEDs does
not work
not work on a single
The wrong LEDs light up
when using DMX
Circuit breaker/fuse
keeps tripping/blowing
Unit does not power up
Unit does not respond to
wired DMX or responds
erratically
Faulty LED module
Faulty LED driver
Long cable / low level signal
Send unit for repair
Send unit for repair
Install an optically coupled DMX splitter before a
long section of cable or right after the unit with
Too many units
Interference from AC wires
If you have technical problems after trying the solutions provided, contact
CHAUVET® Technical Support.
Legend™ 412 Series User Manual Rev. 5 -27-
Page 32
Returns
ll refuse any product
Contact Us
Fax: +44 (0)1773 511110
Email: tech@chauvetlighting.com
www.chauvetpro.com
www.chauvetlighting.co.uk
Technical Information
You must send the merchandise prepaid, in the original box, and with the original packing
Procedure
and accessories. CHAUVET® will not issue call tags.
Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before
shipping the product. Be prepared to provide the model number, serial number, and a brief
description of the cause for the return.
Clearly label the package with an RMA number. CHAUVET® wi
returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Once you have received the RMA number, include the following information on a piece of
paper inside the box:
• Your name
• Your address
• Your phone number
• The RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. FedEx packing or double boxing are
recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace returned
product(s).
World Headquarters
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: (954) 929-1115
Fax: (954) 929-5560
Toll free: (800) 762-1084
Technical Support
Voice: (954) 929-1115 (Press 4)
Fax: (954) 756-8015
World Wide Web
United Kingdom & Ireland
CHAUVET® Eur ope Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Technical Support
Email: uktech@chauvetlighting.com
World Wide Web
Outside the U.S., United Kingdom, or Ireland, contact your distributor of record. Follow their
instructions to request support or to return a product. Visit our website for contact details.
-28- Legend™ 412 Series User Manual Rev. 5
Page 33
Technical Specifications Legend™ 412
Dimensions and
Length
Width
Height
Weight
5.5 in (140 mm)
10.1 in (257 mm)
12.0 in (304 mm)
10.1 lbs (4.58 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Electrical
Power Supply Type
Range
Voltage Selection
Switching (internal)
100~240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
144 W
139 W
Operating current
1.8 A
.5 A
Fuse
T 3.15 A, 250 V
T 3.15 A, 250 V
Power I/O
US/Worldwide
Europe
Power input connector
IEC
IEC
Power output connector
N/A
N/A
Power cord plug
Edison (US)
Local plug
Light Source
Type
Power
Lifespan
LED
10 W
50,000 hours
Color
Quantity
Current
Quad Color
12
700 mA (per die)
Photo Optic
Parameter
Standard Optics
Illuminance @ 5 m
1,500 lx
Beam angle
12.0º
Field angle
23.0º
Thermal
Max. External Temperature
Cooling System
104° F (40° C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
5-pin XLR
Sockets
12,28
Ordering
Product Name
Item Code
UPC Number
Legend™ 412
06010406
781462207588
Weight
Technical Information
Legend™ 412 Series User Manual Rev. 5 -29-
Page 34
Dimensions and
Length
Width
Height
Weight
5.5 in (140 mm)
10.1 in (257 mm)
12.0 in (304 mm)
10.1 lbs (4.58 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Electrical
Power Supply Type
Range
Voltage Selection
Switching (internal)
100~240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
165 W
170 W
Operating current
1.4 A
.7 A
Fuse
T 3.15 A, 250 V
T 3.15 A, 250 V
Power I/O
US/Worldwide
Europe
Power input connector
IEC
IEC
Power output connector
N/A
N/A
Power cord plug
Edison (US)
Local plug
Light Source
Type
Power
Lifespan
LED
10 W
50,000 hours
Color
Quantity
Current
Quad Color
12
700 mA (per die)
Photo Optic
Parameter
Standard Optics
Illuminance @ 5 m
1,680 lx
Beam angle
12.0º
Field angle
23.0º
Thermal
Max. External Temperature
Cooling System
104° F (40° C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
5-pin XLR
Sockets
10,20
Ordering
Product Name
Item Code
UPC Number
Legend™ 412 VW
06010425
781462207779
Technical Information
Technical Specifications Legend™ 412 VW
Weight
-30- Legend™ 412 Series User Manual Rev. 5
Page 35
CHAUVET®
5200 NW 108th Avenue
Sunrise, FL 33351 (USA)
(800) 762-1084 – (954) 929-1115
FAX (954) 929-5560
www.chauvetlighting.com
Legend™ 412 User Manual Rev. 5
August 2012
Technical Information
Legend™ 412 Series User Manual Rev. 5 -31-
Loading...